Skip to content

Extends miniwdl to run workflows on AWS Batch & EFS

License

Notifications You must be signed in to change notification settings

miniwdl-ext/miniwdl-aws

Repository files navigation

miniwdl AWS plugin

Extends miniwdl to run workflows on AWS Batch and EFS

This miniwdl plugin enables it to execute WDL tasks as AWS Batch jobs. It uses EFS for work-in-progress file I/O, optionally uploading final workflow outputs to S3.

Before diving into this, first consider AWS HealthOmics, which includes a managed service for WDL workflows that doesn't need you to provision all the infrastructure. Our companion project miniwdl-omics-run provides a convenient CLI for launching HealthOmics runs with local WDL source code files.

There are a few ways to deploy this miniwdl-aws plugin:

Amazon Genomics CLI

Amazon Genomics CLI can deploy a miniwdl-aws context into your AWS account with all the necessary infrastructure.

Amazon SageMaker Studio

Or, try the miniwdl-aws-studio recipe to install miniwdl for interactive use within Amazon SageMaker Studio, a web IDE with a terminal and filesystem browser. You can use the terminal to operate miniwdl run against AWS Batch, the filesystem browser to manage the inputs and outputs on EFS, and the Jupyter notebooks to further analyze the outputs.

image

miniwdl-aws-submit with custom infrastructure

Lastly, advanced operators can use miniwdl-aws-terraform to deploy/customize the necessary AWS infrastructure, including a VPC, EFS file system, Batch queues, and IAM roles.

In this scheme, a local command-line wrapper miniwdl-aws-submit launches miniwdl in its own small Batch job to orchestrate a workflow. This workflow job then spawns WDL task jobs as needed, without needing the submitting laptop to remain connected for the duration. The workflow jobs run on lightweight Fargate resources, while task jobs run on EC2 spot instances.

Submitting workflow jobs

After deploying miniwdl-aws-terraform, pip3 install miniwdl-aws locally to make the miniwdl-aws-submit program available. Try the self-test:

miniwdl-aws-submit --self-test --follow --workflow-queue miniwdl-workflow 

Then launch a viral genome assembly that should run in 10-15 minutes:

miniwdl-aws-submit \
  https://github.com/broadinstitute/viral-pipelines/raw/v2.1.28.0/pipes/WDL/workflows/assemble_refbased.wdl \
  reads_unmapped_bams=https://github.com/broadinstitute/viral-pipelines/raw/v2.1.19.0/test/input/G5012.3.testreads.bam \
  reference_fasta=https://github.com/broadinstitute/viral-pipelines/raw/v2.1.19.0/test/input/ebov-makona.fasta \
  sample_name=G5012.3 \
  --workflow-queue miniwdl-workflow \
  --s3upload s3://MY-BUCKET/assemblies \
  --verbose --follow

The command line resembles miniwdl run's with extra AWS-related arguments:

  • --workflow-queue Batch job queue on which to schedule the workflow job; output from miniwdl-aws-terraform, default miniwdl-workflow. (Also set by environment variable MINIWDL__AWS__WORKFLOW_QUEUE)
  • --follow live-streams the workflow log instead of exiting immediately upon submission. (--wait blocks on the workflow without streaming the log.)
  • --s3upload (optional) S3 folder URI under which to upload the workflow products, including the log and output files (if successful). The bucket must be allow-listed in the miniwdl-aws-terraform deployment.
    • Unless --s3upload ends with /, one more subfolder is added to the uploaded URI prefix, equal to miniwdl's automatic timestamp-prefixed run name. If it does end in /, then the uploads go directly into/under that folder (and a repeat invocation would be expected to overwrite them).

miniwdl-aws-submit detects other infrastructure details (task queue, EFS access point, IAM role) based on tags set on the workflow queue; see miniwdl-aws-submit --help for additional options to override those defaults.

Arguments not consumed by miniwdl-aws-submit are passed through to miniwdl run inside the workflow job; as are environment variables whose names begin with MINIWDL__, allowing override of any miniwdl configuration option (disable wih --no-env). See miniwdl_aws.cfg for various options preconfigured in the workflow job container, some of which can be adjusted to benefit specific workloads. For example, to halve the maximum rate at which miniwdl invokes the AWS Batch SubmitJob API, set MINIWDL__AWS__SUBMIT_PERIOD=2 in the miniwdl-aws-submit environment.

If the specified WDL source code is an existing local .wdl or .zip file, miniwdl-aws-submit automatically ships it with the workflow job as the WDL to execute. Given a .wdl file, it runs miniwdl zip to detect & include any imported WDL files; while it assumes .zip files were also generated by miniwdl zip. If the source code is too large to fit in the AWS Batch request payload (~50KB), then you'll instead need to pass it by reference to a URL or EFS path.

The workflow and task jobs all mount EFS at /mnt/efs. Although workflow input files are usually specified using HTTPS or S3 URIs, files already resident on EFS can be used with their /mnt/efs paths (which probably don't exist locally on the submitting machine). Unlike the WDL source code, miniwdl-aws-submit will not attempt to ship/upload local input files.

Run directories on EFS

Miniwdl runs the workflow in a directory beneath /mnt/efs/miniwdl_run (override with --dir). The outputs also remain cached there for potential reuse in future runs (to avoid, submit with --no-cache or wipe /mnt/efs/miniwdl_run/_CACHE).

Given the EFS-centric I/O model, you'll need a way to browse and manage the filesystem contents remotely. The companion recipe lambdash-efs is one option; miniwdl-aws-terraform outputs the infrastructure details needed to deploy it (pick any subnet). Or, set up an instance/container mounting your EFS, to access via SSH or web app (e.g. JupyterHub, Cloud Commander, VS Code server).

You can also automate cleanup of EFS run directories by setting miniwdl-aws-submit --s3upload and:

  • --delete-after success to delete the run directory immediately after successful output upload
  • --delete-after failure to delete the directory after failure
  • --delete-after always to delete it in either case
  • (or set environment variable MINIWDL__AWS__DELETE_AFTER_S3_UPLOAD)

Deleting a run directory after success prevents the outputs from being reused in future runs. Deleting it after failures can make debugging more difficult (although logs are retained, see below).

Security note on file system isolation

Going through AWS Batch & EFS, miniwdl can't enforce the strict file system isolation between WDL task containers that it does locally. All the AWS Batch containers have read/write access to the entire EFS file system (as viewed through the access point), not only their initial working directory.

This is usually benign, because WDL tasks should only read their declared inputs and write into their respective working/temporary directories. But poorly- or maliciously-written tasks could read & write files elsewhere on EFS, even changing their own input files or those of other tasks. This risks unintentional side-effects or worse security hazards from untrusted code.

To mitigate this, test workflows thoroughly using the local backend, which strictly isolates task containers' file systems. If WDL tasks insist on modifying their input files in place, then --copy-input-files can unblock them (at a cost in time, space, and IOPS). Lastly, avoid using untrusted WDL code or container images; but if they're necessary, then use a separate EFS access point and restrict the IAM and network configuration for the AWS Batch containers appropriately.

EFS performance considerations

To scale up to larger workloads, it's important to study AWS documentation on EFS performance and monitoring. Like any network file system, EFS limits on throughput and IOPS can cause bottlenecks, in the worst case effectively freezing a workflow.

Management tips:

  • Monitor file system throughput limits, IOPS, and burst credits (if applicable) in the EFS area of the AWS Console.
  • Retain the default Elastic throughput mode (though it may cost more than other modes)
  • Code WDL tasks to write any purely-temporary files under /tmp, which may use local scratch space, instead of the EFS working directory.
  • Configure miniwdl and AWS Batch to limit the number of concurrent jobs and/or the rate at which they turn over (see miniwdl_aws.cfg for relevant details).
  • Spread out separate workflow runs over time or across multiple EFS file systems.

FSx for Lustre and other shared filesystems

If EFS performance remains insufficient, then you can configure your Batch compute environments to automatically mount some other shared filesystem upon instance startup. Then use miniwdl-aws-submit --no-efs to make it assume the filesystem will already be mounted at a certain location (default --mount /mnt/net) across all instances. In this case, the compute environment for workflow jobs is expected to use EC2 instead of Fargate resources (usually necessary for mounting).

The miniwdl-aws-terraform repo includes a variant setting this up with FSx for Lustre. FSx offers higher throughput scalability, but has other downsides compared to EFS (higher upfront costs, manual capacity scaling, single-AZ deployment, fewer AWS service integrations).

Logs & troubleshooting

If the terminal log isn't available (through Studio or miniwdl-submit-awsbatch --follow) to trace a workflow failure, look for miniwdl's usual log files written in the run directory on EFS or copied to S3.

Each task job's log is also forwarded to CloudWatch Logs under the /aws/batch/job group and a log stream name reported in miniwdl's log. Using miniwdl-aws-submit, the workflow job's log is also forwarded. CloudWatch Logs indexes the logs for structured search through the AWS Console & API.

Misconfigured infrastructure might prevent logs from being written to EFS or CloudWatch at all. In that case, use the AWS Batch console/API to find status messages for the workflow or task jobs.

Tasks can self-report their CPU & memory usage in their standard error logs, by setting MINIWDL__LOG_TASK_USAGE__PERIOD=60 to report every 60 seconds (or as desired). Submit with --verbose --follow, or look in any task's CloudWatch Logs stream or stderr.txt file, to see the "container usage" log messages.

GPU jobs

Miniwdl-aws recognizes the gpu: true setting in a task runtime{} section, and translates that to a GPU resource requirement for AWS Batch. For the job to be scheduled, the Batch compute environment must of course make GPU instance types available.

By default, gpu: true translates to a requirement for a single GPU. The WDL spec defines this as a boolean value, so there is no clear way to request multiple GPUs for a given task. The configuration MINIWDL__AWS__GPU_VALUE can be set to an integer N to make all tasks with gpu: true require N GPUs.

Alternatively, miniwdl-aws also recognizes the acceleratorType and acceleratorCount attributes used by AWS HealthOmics. Any acceleratorType starting with "nvidia" translates to a Batch GPU requirement; the actual GPU type will depend on the instance type(s) made available by the compute environment.

Multi-GPU operations may need more shared memory than Batch typically makes available in each task container. To increase the available shared memory, set e.g. MINIWDL__AWS__CONTAINER_PROPERTIES='{"linuxParameters":{"sharedMemorySize":4096}}'

Contributing

Pull requests are welcome! For help, open an issue here or drop in on #miniwdl in the OpenWDL Slack.

Code formatting and linting. To prepare your code to pass the CI checks,

pip3 install --upgrade -r test/requirements.txt
pre-commit run --all-files

Running tests. In an AWS-credentialed terminal session,

MINIWDL__AWS__WORKFLOW_QUEUE=miniwdl-workflow test/run_tests.sh

This builds the requisite Docker image from the current code revision and pushes it to an ECR repository (which must be prepared once with aws ecr create-repository --repository-name miniwdl-aws). To test an image from the GitHub public registry or some other version, set MINIWDL__AWS__WORKFLOW_IMAGE to the desired tag.