Google_Chrome_Current_Windows

Running This Profile Directly from Github

Against a remote target using ssh with escalated privileges (i.e., InSpec installed on a separate runner host)

# How to run 
inspec exec https://github.com/mitre/google-chrome-v2r6-stig-baseline/archive/master.tar.gz -t ssh://TARGET_USERNAME:TARGET_PASSWORD@TARGET_IP:TARGET_PORT --sudo --sudo-password=<SUDO_PASSWORD_IF_REQUIRED> --input-file <path_to_your_input_file/name_of_your_input_file.yml> --reporter=cli json:<path_to_your_output_file/name_of_your_output_file.json> 

Against a remote target using a pem key with escalated privileges (i.e., InSpec installed on a separate runner host)

# How to run 
inspec exec https://github.com/mitre/google-chrome-v2r6-stig-baseline/archive/master.tar.gz -t ssh://TARGET_USERNAME@TARGET_IP:TARGET_PORT --sudo -i <your_PEM_KEY> --input-file <path_to_your_input_file/name_of_your_input_file.yml> --reporter=cli json:<path_to_your_output_file/name_of_your_output_file.json>  

Against a local Red Hat host with escalated privileges (i.e., InSpec installed on the target)

# How to run
sudo inspec exec https://github.com/mitre/google-chrome-v2r6-stig-baseline/archive/master.tar.gz --input-file <path_to_your_input_file/name_of_your_input_file.yml> --reporter=cli json:<path_to_your_output_file/name_of_your_output_file.json> 

Different Run Options

Full exec options

Running This Baseline from a local Archive copy

If your runner is not always expected to have direct access to GitHub, use the following steps to create an archive bundle of this profile and all of its dependent tests:

(Git is required to clone the InSpec profile using the instructions below. Git can be downloaded from the Git site.)

mkdir profiles
cd profiles
git clone https://github.com/mitre/google-chrome-v2r6-stig-baseline.git
inspec archive google-chrome-v2r6-stig-baseline
sudo inspec exec <name of generated archive> --input-file <path_to_your_input_file/name_of_your_input_file.yml> --reporter=cli json:<path_to_your_output_file/name_of_your_output_file.json> 

For every successive run, follow these steps to always have the latest version of this baseline and dependent profiles:

cd google-chrome-v2r6-stig-baseline
git pull
cd ..
inspec archive google-chrome-v2r6-stig-baseline --overwrite
sudo inspec exec <name of generated archive> --input-file <path_to_your_input_file/name_of_your_input_file.yml> --reporter=cli json:<path_to_your_output_file/name_of_your_output_file.json> 

Using Heimdall for Viewing the JSON Results

The JSON results output file can be loaded into heimdall-lite for a user-interactive, graphical view of the InSpec results.

The JSON InSpec results file may also be loaded into a full heimdall server, allowing for additional functionality such as to store and compare multiple profile runs.

Authors

Special Thanks

• Lockheed Martin

Contributing and Getting Help

To report a bug or feature request, please open an issue.

Appendix - (For Developers Interested in Running Hardening Tests):

This repository uses either Beaker to run tests or the KitchenCI framework to run tests on the various profiles. Please see the documentation below on how to use each of the frameworks.

Testing with Beaker

To run the tests, perform the following actions:

1. Have Ruby 2.3.0 or later installed
2. Run bundle install
3. Run rake beaker:suites

Debugging

If you need to debug your systems, you can run Beaker with a couple of options:

1. Preserve the VM unconditionally

   • BEAKER_destroy=no rake beaker:suites

2. Preserve the VM unless the tests pass

   • BEAKER_destroy=onpass rake beaker:suites

You can then access the VM by going to the root level of the repository and navigating to .vagrant/beaker_vagrant_files/<automatic directory>.

You should find a Vagrantfile at that location and can use any standard Vagrant CLI Commands.

The most useful of these will be vagrant status and vagrant ssh <vm name>.

Test Layout

The tests are housed under the spec/acceptance directory and use the profiles in spec/fixtures/inspec_profiles during testing.

Testing with Kitchen

Dependencies

• Ruby 2.3.0 or later
• Virtualbox
• Vagrant

Notes to Windows Users

1. An installation of ChefDK may generate conflicts when combined with the installed kitchen gems. Recommend NOT installing ChefDK before testing with this repo.

2. If you run into errors when running bundle install, use the following commands to install gems:

• gem install kitchen-puppet
• gem install librarian-puppet
• gem install kitchen-vagrant

3. If the tests are not found when running kitchen verify, open .kitchen.yml and consult inspec_tests under the suites section.

4. You may also experience an error when running kitchen converge where a folder is unable to be created due to the length of the path. In this case, you may need to edit a registry key as explained here.

Setting up your box

1. Clone the repo via git clone -b dev https://github.com/simp/inspec_profiles.git
2. cd to inspec_profiles
3. Run bundle install
4. Run kitchen list - you should see the following choice:
   • default-centos-7
5. Run kitchen converge default-centos-7
6. Run kitchen list - your should see your host with status "converged"

Validating your box

Note: Once the open issues are resolved in InSpec and kitchen-inspec these steps will not really be needed but for now we have to do a few things a bit more manually. Once resolved fully, you will only need to run kitchen verify (machine name) and everything will be taken care of.

In the 'inspec_profiles' dir ( manually )

1. cd .kitchen/
2. vi default-centos-7.yml
3. copy the ssh_key: value for later
4. note the mapped port value ( usually 2222) and use in the next step

In the 'inspec_profiles' dir

1. On the terminal: export SSH_KEY=(value from before)

2. cd to inspec_profiles

   • (optional) run an inspec check, and ensure there are no errors in the baseline.

3. run: inspec exec -i $SSH_KEY -t ssh://vagrant@127.0.0.1:2222 ( or the port mapped from step '4' above )

   • (optional) `inspec exec controls/V-#####
   • -i $SSH_KEY -t ssh://vagrant@127.0.0.1:2222` to just test a single control
   • (optional) inspec exec -i $SSH_KEY --controls=V-#####,V-##### -t ssh://vagrant@127.0.0.1:2222 to just test a small set of controls

Hardening Development

Included in this repository are testing scripts which allow you to run the profile using Vagrant or EC2 VMs. You can choose which environment your VMs are run in by passing the appropriate test-kitchen yml file to your KITCHEN_LOCAL_YAML environment variable. All of the commands below use the kitchen.vagrant.yml file as an example, however a kitchen.ec2.yaml is also available in the repository and can be substituted below to run the tests in EC2.

• Making Changes and Testing

  • run CHEF_LICENSE=accept KITCHEN_LOCAL_YAML=kitchen.vagrant.yml kitchen converge (machine name) - runs any changes to your hardening scripts
  • run kitchen verify (machine name) - runs the inspec tests

• Starting Clean:

  • run CHEF_LICENSE=accept KITCHEN_LOCAL_YAML=kitchen.vagrant.yml kitchen destroy (machine name) kitchen will drop your box and you can start clean

• Going through the entire process ( create, build, configure, verify, destroy )

  • run CHEF_LICENSE=accept KITCHEN_LOCAL_YAML=kitchen.vagrant.yml kitchen test (machine name) or to test all defined machines kitchen test

• Just running the validation scripts

  • run CHEF_LICENSE=accept KITCHEN_LOCAL_YAML=kitchen.vagrant.yml kitchen verify (machine name)

• just run one or more controls in the validation

  • edit the .kitchen.yml file in the controls: section add the control id(s) to the list

NOTICE

© 2018-2022 The MITRE Corporation.

Approved for Public Release; Distribution Unlimited. Case Number 18-3678.

NOTICE

MITRE hereby grants express written permission to use, reproduce, distribute, modify, and otherwise leverage this software to the extent permitted by the licensed terms provided in the LICENSE.md file included with this project.

NOTICE

This software was produced for the U. S. Government under Contract Number HHSM-500-2012-00008I, and is subject to Federal Acquisition Regulation Clause 52.227-14, Rights in Data-General.

No other use other than that granted to the U. S. Government, or to those acting on behalf of the U. S. Government under that Clause is authorized without the express written permission of The MITRE Corporation.

For further information, please contact The MITRE Corporation, Contracts Management Office, 7515 Colshire Drive, McLean, VA 22102-7539, (703) 983-6000.

NOTICE

DISA STIGs are published by DISA IASE, see: https://iase.disa.mil/Pages/privacy_policy.aspx