Pioneer Ddj Sx

Pioneer DDJ-SX

The DDJ-SX delivers intuitive control of all MIXXX's exciting features. Dedicated buttons and dials deliver plug-and-play control of 4 decks.

Controller Configuration

The DDJ-SX provides several settings, which can be changed in a special Utility-Mode.

Utility-Mode

Disconnect USB-cable.
Switch off [STANDBY/ON] the unit.
Hold [SHIFT] button and [PLAY/PAUSE] button at the left deck while switching on the unit [STANDBY/ON].
Now Utility-Mode is activated.
For saving and exiting Utility-Mode, switch off the unit again [STANDBY/ON].

Setting for usage of Serato DJ

To use the DDJ-SX with MIXXX, the controller must be configured for the usage of Serato DJ. You can check/change this setting as follows (default is for using Serato DJ):
Press the [KEY LOCK] button at the left deck:

[KEY LOCK] button off: Controller is configured for using Serato DJ.
[KEY LOCK] button on (lit): Controller is configured for using different DJ-software.

User Options

To change the mapping's user options, you have to open the script file (*.js). At the top of the file under USER OPTIONS the following settings can be made:

PioneerDDJSX.jogwheelSensivity: Sets the jogwheel sensivity. 1 = default, 2 is twice as sensitive, 0.5 is half as sensitive.
PioneerDDJSX.jogwheelShiftMultiplier: Sets how much more sensitive the jogwheels get when holding [SHIFT]. Set it to 1 to disable jogwheel sensitivity increase when holding [SHIFT].
PioneerDDJSX.speedSliderRange: Sets the default speed slider range (0.08 = 8%), set at controller init.
PioneerDDJSX.cutVumeter: Cuts level-meter low frequencies and expands upper frequencies.
PioneerDDJSX.twinkleVumeterAutodjOn: If true, level-meter twinkles if AutoDJ is enabled.
PioneerDDJSX.autoDJAddTop: If true, the selected track will be added to AutoDJ queue-top on pressing [ROTARY SELECTOR], else the selected track will be added to AutoDJ queue-bottom.
PioneerDDJSX.autoDJTickInterval: Sets the duration of sleeping between AutoDJ actions if AutoDJ is enabled [ms].
PioneerDDJSX.autoDJMaxBpmAdjustment: Sets the maximum adjustment of BPM allowed for beats to sync if AutoDJ is enabled [BPM].
PioneerDDJSX.autoDJShuffleAfterSkip: If true, AutoDJ queue is being shuffled after skipping a track.
PioneerDDJSX.jumpPreviewEnabled: If true, by releasing [ROTARY SELECTOR], track in preview player jumps forward to "jumpPreviewPosition".
PioneerDDJSX.jumpPreviewPosition: Sets the preview player absolute position, being set at releasing [ROTARY SELECTOR] and if "jumpPreviewEnabled" is enabled.
PioneerDDJSX.samplerCueGotoAndPlay: If true, pad press in [SAMPLER]-PAD-MODE repeatedly causes sampler to play loaded track from cue-point, else it causes to play loaded track from the beginning.
PioneerDDJSX.autoPFL: If true, PFL / Cue (headphone) is being activated by loading a track into certain deck.
PioneerDDJSX.useNewLibraryControls: If true, new in Mixxx 2.1 introduced library controls will be used, else old playlist controls will be used.
PioneerDDJSX.needleSearchShiftEnable: If true, [SHIFT] has to be pressed to activate needle search control.

General Functions

Managed by Mixxx

Group	Figure	[SHIFT]?	Button Name	Description
5 - BROWSER	2, 3, 4, 5	-	[LOAD]	Loads the selected track into the specific deck
:::	2	[SHIFT]	[LOAD]	AutoDJ - Toggle BPM sync
:::	3	[SHIFT]	[LOAD]	AutoDJ - Toggle Key sync
:::	1	-	[ROTARY SELECTOR]	See user options: default = Select track in Playlist (alt. = MoveVertical)
:::	1	-	[ROTARY SELECTOR PRESS]	See user options: default = Add track to AutoDJ queue at bottom (alt. = at top)
:::	1	[SHIFT]	[ROTARY SELECTOR]	See user options: default = Select Playlist (alt. = MoveHorizontal)
:::	1	[SHIFT]	[ROTARY SELECTOR PRESS]	See user options: default = Toggle selected sidebar item (alt. = ChooseItem)
:::	6	-	[BACK]	See user options: default = AutoDJ - Skip next track in queue (alt. = MoveFocusBackward)
:::	6	[SHIFT]	[BACK]	Maximize view of Library
:::	7	-	[LOAD PREPARE]	Load selected track into PreviewDeck, jump to position (see user options) and play, else stop already playing track
3 - MIXER	1	-	Crossfader	Controls Mixxx crossfader, fades between deck 1, 3 and 2, 4
:::	2	-	Channel fader	Controls deck volume
:::	2	[SHIFT]	Channel fader	Fader start (starts playing deck when rising deck volume)
:::	3	-	TRIM	Controls deck gain
:::	4	-	EQ HIGH	Controls deck's equalizer/filter high frequencies
:::	5	-	EQ MID	Controls deck's equalizer/filter mid frequencies
:::	6	-	EQ LOW	Controls deck's equalizer/filter low frequencies
:::	7	-	[CUE]	Toggles PFL/Cue (headphones) for specific deck
:::	7	[SHIFT]	[CUE]	BPM Tab function for specific deck
:::	9	[SHIFT]	[MASTER CUE]	Toggles split cue (headphones)
:::	10	-	Crossfader Assign	Crossfader assignment - deck to crossfader (left (A), right (B) or center (THRU))
:::	14	-	SAMPLER VOLUME	Controls volume of all available Sampler decks
4 - FRONT PANEL	1	-	Crossfader curve	Controls Mixxx crossfader curve
1 - DECK	25	-	[PANEL SELECT]	Show/hide Sampler decks / Effect rack

Managed by the controller

The following functions are directly controlled by the controller (Mixxx-independent):

Group	Figure	[SHIFT]?	Button Name	Description
3 - MIXER	8	-	MASTER LEVEL	Controls the master output volume
:::	9	-	[MASTER CUE]	Toggles master cue
:::	13	-	HEADPHONES MIX	Controls headphone's audio source (cue, master)
:::	15	-	BOOTH MONITOR LEVEL	Controls the booth output volume
4 - FRONT PANEL	2	-	INPUT SELECT	Controls deck source (PC, MIC, CD, PHONO, LINE)

Deck Functions

Managed by Mixxx

Group	Figure	[SHIFT]?	Button Name	Description
1 - DECK	1	-	[PLAY/PAUSE]	Toggles play/pause
:::	1	[SHIFT]	[PLAY/PAUSE]	Toggles play stutter
:::	2	-	[CUE]	Toggles default cue (sets cue point/ goes to cue point)
:::	2	[SHIFT]	[CUE]	Toggles brake
:::	3	-	Jog dial (Platter)	Vinyl-Mode enabled: performs scratching when pressed and rotated, Vinyl-Mode disabled: performs pitch bend
:::	3	[SHIFT]	Jog dial (Platter)	Vinyl-Mode enabled: performs scratching considering user-options multiplier when touched and rotated, Vinyl-Mode disabled: performs pitch bend considering user-options multiplier
:::	3	-	Jog dial (Wheel side)	Performs pitch bend when rotated
:::	3	[SHIFT]	Jog dial (Wheel side)	Performs pitch bend when rotated considering user-options multiplier
:::	4	-	TEMPO	Controls pitch/tempo ratio
:::	5	-	[KEYLOCK]	Toggles keylock
:::	5	[SHIFT]	[KEYLOCK]	Changes TEMPO slider range: 8% -> 16% -> 32% -> 64% -> 100% -> 8%...
:::	5	-	[KEYLOCK] (Long press)	Toggles pitch/tempo reset
:::	6	-	[NEEDLE SEARCH]	Jumps to equivalent absolute position in track
:::	13	-	[SYNC]	Toggles deck sync
:::	13	[SHIFT]	[SYNC]	Toggles quantize function
:::	14	-	[AUTO LOOP]	Toggles a 4-Beat loop
:::	14	[SHIFT]	[AUTO LOOP]	Toggles reloop
:::	15	-	[LOOP 1/2X]	Halves active loop
:::	15	[SHIFT]	[LOOP 1/2X]	Moves active loop one beat backward (left)
:::	16	-	[LOOP 2X]	Doubles active loop
:::	16	[SHIFT]	[LOOP 2X]	Moves active loop one beat forward (right)
:::	17	-	[LOOP IN]	Toggles loop in
:::	18	-	[LOOP OUT]	Toggles loop out
:::	18	[SHIFT]	[LOOP OUT]	Toggles reloop / exit loop
:::	19	-	[VINYL]	Toggles vinyl (scratch) mode
:::	20	-	[CENSOR]	Toggles reverse roll play
:::	20	[SHIFT]	[CENSOR]	Toggles reverse play
:::	21	-	[SLIP]	Toggles slip mode
:::	22	-	[GRID ADJUST]	Hold and touch/rotate Jog dial to adjust beats faster/slower
:::	22	[SHIFT]	[GRID ADJUST]	Set/translate beat grid to current track position (adjust position with Jog dial)
:::	23	-	[GRID SLIDE]	Hold and touch/rotate Jog dial to set/translate beat grid earlier/later
:::	24	-	[SHIFT]	Switches to shifted controls, no direct function
6 - PERFORMANCE PADS	1	-	[PAD 1] (HOT CUE mode)	Set/activate Hot cue 1
:::	1	[SHIFT]	[PAD 1] (HOT CUE mode)	Clear Hot cue 1
:::	2	-	[PAD 2] (HOT CUE mode)	Set/activate Hot cue 2
:::	2	[SHIFT]	[PAD 2] (HOT CUE mode)	Clear Hot cue 2
:::	3	-	[PAD 3] (HOT CUE mode)	Set/activate Hot cue 3
:::	3	[SHIFT]	[PAD 3] (HOT CUE mode)	Clear Hot cue 3
:::	4	-	[PAD 4] (HOT CUE mode)	Set/activate Hot cue 4
:::	4	[SHIFT]	[PAD 4] (HOT CUE mode)	Clear Hot cue 4
:::	5	-	[PAD 5] (HOT CUE mode)	Set/activate Hot cue 5
:::	5	[SHIFT]	[PAD 5] (HOT CUE mode)	Clear Hot cue 5
:::	6	-	[PAD 6] (HOT CUE mode)	Set/activate Hot cue 6
:::	6	[SHIFT]	[PAD 6] (HOT CUE mode)	Clear Hot cue 6
:::	7	-	[PAD 7] (HOT CUE mode)	Set/activate Hot cue 7
:::	7	[SHIFT]	[PAD 7] (HOT CUE mode)	Clear Hot cue 7
:::	8	-	[PAD 8] (HOT CUE mode)	Set/activate Hot cue 8
:::	8	[SHIFT]	[PAD 8] (HOT CUE mode)	Clear Hot cue 8
:::	1	-	[PAD 1] (ROLL mode)	Toggle Beatloop roll length index 1 (according parameter set)
:::	2	-	[PAD 2] (ROLL mode)	Toggle Beatloop roll length index 2 (according parameter set)
:::	3	-	[PAD 3] (ROLL mode)	Toggle Beatloop roll length index 3 (according parameter set)
:::	4	-	[PAD 4] (ROLL mode)	Toggle Beatloop roll length index 4 (according parameter set)
:::	5	-	[PAD 5] (ROLL mode)	Toggle Beatloop roll length index 5 (according parameter set)
:::	6	-	[PAD 6] (ROLL mode)	Toggle Beatloop roll length index 6 (according parameter set)
:::	7	-	[PAD 7] (ROLL mode)	Toggle Beatloop roll length index 7 (according parameter set)
:::	8	-	[PAD 8] (ROLL mode)	Toggle Beatloop roll length index 8 (according parameter set)
:::	1	-	[PAD 1] (SLICER mode)	Press: Jumps to beat position 1 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	2	-	[PAD 2] (SLICER mode)	Press: Jumps to beat position 2 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	3	-	[PAD 3] (SLICER mode)	Press: Jumps to beat position 3 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	4	-	[PAD 4] (SLICER mode)	Press: Jumps to beat position 4 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	5	-	[PAD 5] (SLICER mode)	Press: Jumps to beat position 5 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	6	-	[PAD 6] (SLICER mode)	Press: Jumps to beat position 6 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	7	-	[PAD 7] (SLICER mode)	Press: Jumps to beat position 7 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	8	-	[PAD 8] (SLICER mode)	Press: Jumps to beat position 8 in 8-beat-section and beat loops according quantization index (default: 1/4 beat), Release (slicer type 1 only): Jumps to actual play position in the background (slip)
:::	1	-	[PAD 1] (SAMPLER mode)	Sample deck index 1 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	1	[SHIFT]	[PAD 1] (SAMPLER mode)	Sample deck index 1 (according sampler bank) - playing: stop deck, stopped: eject track
:::	2	-	[PAD 2] (SAMPLER mode)	Sample deck index 2 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	2	[SHIFT]	[PAD 2] (SAMPLER mode)	Sample deck index 2 (according sampler bank) - playing: stop deck, stopped: eject track
:::	3	-	[PAD 3] (SAMPLER mode)	Sample deck index 3 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	3	[SHIFT]	[PAD 3] (SAMPLER mode)	Sample deck index 3 (according sampler bank) - playing: stop deck, stopped: eject track
:::	4	-	[PAD 4] (SAMPLER mode)	Sample deck index 4 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	4	[SHIFT]	[PAD 4] (SAMPLER mode)	Sample deck index 4 (according sampler bank) - playing: stop deck, stopped: eject track
:::	5	-	[PAD 5] (SAMPLER mode)	Sample deck index 5 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	5	[SHIFT]	[PAD 5] (SAMPLER mode)	Sample deck index 5 (according sampler bank) - playing: stop deck, stopped: eject track
:::	6	-	[PAD 6] (SAMPLER mode)	Sample deck index 6 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	6	[SHIFT]	[PAD 6] (SAMPLER mode)	Sample deck index 6 (according sampler bank) - playing: stop deck, stopped: eject track
:::	7	-	[PAD 7] (SAMPLER mode)	Sample deck index 7 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	7	[SHIFT]	[PAD 7] (SAMPLER mode)	Sample deck index 7 (according sampler bank) - playing: stop deck, stopped: eject track
:::	8	-	[PAD 8] (SAMPLER mode)	Sample deck index 8 (according sampler bank) - empty: Load selected track into sample deck, track loaded: start play (default, see user options) sample deck
:::	8	[SHIFT]	[PAD 8] (SAMPLER mode)	Sample deck index 8 (according sampler bank) - playing: stop deck, stopped: eject track
:::	1	-	[PAD 1] (GROUP2 mode)	Toggle Beatloop length index 1 (according parameter set)
:::	2	-	[PAD 2] (GROUP2 mode)	Toggle Beatloop length index 2 (according parameter set)
:::	3	-	[PAD 3] (GROUP2 mode)	Toggle Beatloop length index 3 (according parameter set)
:::	4	-	[PAD 4] (GROUP2 mode)	Toggle Beatloop length index 4 (according parameter set)
:::	5	-	[PAD 5] (GROUP2 mode)	Toggle Beatloop length index 5 (according parameter set)
:::	6	-	[PAD 6] (GROUP2 mode)	Toggle Beatloop length index 6 (according parameter set)
:::	7	-	[PAD 7] (GROUP2 mode)	Toggle Beatloop length index 7 (according parameter set)
:::	8	-	[PAD 8] (GROUP2 mode)	Toggle Beatloop length index 8 (according parameter set)
:::	9	-	[HOT CUE] mode	Switches PAD control and illumination to HOT CUE mode
:::	10	-	[ROLL] mode	Switches PAD control and illumination to BEATLOOP ROLL mode
:::	10	[SHIFT]	[ROLL] mode	Switches PAD control and illumination to GROUP2 (BEATLOOP) mode
:::	11	-	[SLICER] mode	Switches PAD control and illumination to SLICER mode, in SLICER mode switches between slicer type 1 and 2
:::	12	-	[SAMPLER] mode	Switches PAD control and illumination to SAMPLER mode
:::	12	-	[SAMPLER] mode (long press)	Toggles SAMPLER PADS velocity mode (velocity ~ volume)
:::	13	-	[PARAMETER LEFT] (ROLL mode)	Decrement active looproll-interval parameter set (0-3, see #Loop/Loop-Roll parameter sets), button LED is illuminated at parameter set 2, 3
:::	13	-	[PARAMETER LEFT] (SLICER mode)	Decrement active slicer quantization (1/8, 1/4, 1/2, 1 beat loop), button LED is illuminated at quantization 1/2, 1
:::	13	-	[PARAMETER LEFT] (SAMPLER mode)	Decrement active sampler bank (0-3), button LED is illuminated at sampler bank 2, 3. Sampler bank 0: sampler 1-8, sampler bank 1: sampler 9-16, sampler bank 2: sampler 17-24, sampler bank 3: sampler 25-32
:::	13	-	[PARAMETER LEFT] (GROUP2 mode)	Decrement active loop-interval parameter set (0-3, see #Loop/Loop-Roll parameter sets), button LED is illuminated at parameter set 2, 3
:::	14	-	[PARAMETER RIGHT] (ROLL mode)	Increment active looproll-interval parameter set (0-3, see #Loop/Loop-Roll parameter sets), button LED is illuminated at parameter set 1, 3
:::	14	-	[PARAMETER RIGHT] (SLICER mode)	Increment active slicer quantization (1/8, 1/4, 1/2, 1 beat loop), button LED is illuminated at quantization 1/4, 1
:::	14	-	[PARAMETER RIGHT] (SAMPLER mode)	Increment active sampler bank (0-3), button LED is illuminated at sampler bank 1, 3. Sampler bank 0: sampler 1-8, sampler bank 1: sampler 9-16, sampler bank 2: sampler 17-24, sampler bank 3: sampler 25-32
:::	14	-	[PARAMETER RIGHT] (GROUP2 mode)	Increment active loop-interval parameter set (0-3, see #Loop/Loop-Roll parameter sets), button LED is illuminated at parameter set 1, 3

Managed by the controller

The following functions are directly controlled by the controller (Mixxx-independent):

Group	Figure	[SHIFT]?	Button Name	Description
1 - DECK	7	-	[DECK 1]	Switches left deck to DECK 1 control and illumination
:::	8	-	[DECK 2]	Switches right deck to DECK 2 control and illumination
:::	9	-	[DECK 3]	Switches left deck to DECK 3 control and illumination
:::	10	-	[DECK 4]	Switches right deck to DECK 4 control and illumination
:::	11	-	[DUAL DECK]	Toggles left deck to dual deck control and illumination (DECK 1 and 3)
:::	12	-	[DUAL DECK]	Toggles right deck to dual deck control and illumination (DECK 2 and 4)

Loop/Loop-Roll parameter sets

By using the [PARAMETER LEFT] and [PARAMETER RIGHT] buttons in BEATLOOP ROLL (default parameter set: 2) or BEATLOOP mode (default parameter set: 0), you can change the pad-assigned loop size. The following table shows the possible assignments (unit: beats).

Set No.	PAD1	PAD2	PAD3	PAD4	PAD5	PAD6	PAD7	PAD8
0	1/4	1/2	1	2	4	8	16	32
1	1/8	1/4	1/2	1	2	4	8	16
2	1/16	1/8	1/4	1/2	1	2	4	8
3	1/32	1/16	1/8	1/4	1/2	1	2	4

Effect Functions

Group	Figure	[SHIFT]?	Button Name	Description
2 - EFFECTS	1 (L)	-	FX1-1	Controls EffectRack1-EffectUnit1-Effect1 meta
:::	1 (L)	[SHIFT]	FX1-1	Controls EffectRack1-EffectUnit1 active effect's parameter 1
:::	1 (R)	-	FX2-1	Controls EffectRack1-EffectUnit2-Effect1 meta
:::	1 (R)	[SHIFT]	FX2-1	Controls EffectRack1-EffectUnit2 active effect's parameter 1
:::	2 (L)	-	FX1-2	Controls EffectRack1-EffectUnit1-Effect2 meta
:::	2 (L)	[SHIFT]	FX1-2	Controls EffectRack1-EffectUnit1 active effect's parameter 2
:::	2 (R)	-	FX2-2	Controls EffectRack1-EffectUnit2-Effect2 meta
:::	2 (R)	[SHIFT]	FX2-2	Controls EffectRack1-EffectUnit2 active effect's parameter 2
:::	3 (L)	-	FX1-3	Controls EffectRack1-EffectUnit1-Effect3 meta
:::	3 (L)	[SHIFT]	FX1-3	Controls EffectRack1-EffectUnit1 active effect's parameter 3
:::	3 (R)	-	FX2-3	Controls EffectRack1-EffectUnit2-Effect3 meta
:::	3 (R)	[SHIFT]	FX2-3	Controls EffectRack1-EffectUnit2 active effect's parameter 3
:::	4 (L)	-	FX1 BEATS	Controls EffectRack1-EffectUnit1 super1 knob
:::	4 (R)	-	FX2 BEATS	Controls EffectRack1-EffectUnit2 super1 knob
:::	4 (L)	[SHIFT]	FX1 BEATS	Controls EffectRack1-EffectUnit1 mix
:::	4 (R)	[SHIFT]	FX2 BEATS	Controls EffectRack1-EffectUnit2 mix
:::	5 (L)	-	[FX1-1 ON]	Toggles EffectRack1-EffectUnit1-Effect1
:::	5 (R)	-	[FX2-1 ON]	Toggles EffectRack1-EffectUnit2-Effect1
:::	5 (L)	[SHIFT]	[FX1-1 ON]	Selects next effect for EffectRack1-EffectUnit1-Effect1
:::	5 (R)	[SHIFT]	[FX2-1 ON]	Selects next effect for EffectRack1-EffectUnit2-Effect1
:::	6 (L)	-	[FX1-2 ON]	Toggles EffectRack1-EffectUnit1-Effect2
:::	6 (R)	-	[FX2-2 ON]	Toggles EffectRack1-EffectUnit2-Effect2
:::	6 (L)	[SHIFT]	[FX1-2 ON]	Selects next effect for EffectRack1-EffectUnit1-Effect2
:::	6 (R)	[SHIFT]	[FX2-2 ON]	Selects next effect for EffectRack1-EffectUnit2-Effect2
:::	7 (L)	-	[FX1-3 ON]	Toggles EffectRack1-EffectUnit1-Effect3
:::	7 (R)	-	[FX2-3 ON]	Toggles EffectRack1-EffectUnit2-Effect3
:::	7 (L)	[SHIFT]	[FX1-3 ON]	Selects next effect for EffectRack1-EffectUnit1-Effect3
:::	7 (R)	[SHIFT]	[FX2-3 ON]	Selects next effect for EffectRack1-EffectUnit2-Effect3
:::	8 (L)	-	[FX1 TAP]	Toggles EffectRack1-EffectUnit1
:::	8 (R)	-	[FX2 TAP]	Toggles EffectRack1-EffectUnit2
:::	8 (L)	[SHIFT]	[FX1 TAP]	Selects next chain for EffectRack1-EffectUnit1
:::	8 (R)	[SHIFT]	[FX2 TAP]	Selects next chain for EffectRack1-EffectUnit2
:::	9, 10, 11, 12	-	[FX1 ASSIGN]	Assign EffectRack1-EffectUnit1 to specific deck
:::	13, 14, 15, 16	-	[FX2 ASSIGN]	Assign EffectRack1-EffectUnit2 to specific deck
:::	17, 18, 19, 20	-	FILTER	Control QuickEffectRack1 super1 knob (e.g. moog filter)