-
-
Notifications
You must be signed in to change notification settings - Fork 1.2k
Stanton Scs.1M Mixxx User Guide
Sean M. Pappalardo edited this page May 25, 2009
·
9 revisions
This guide explains how the SCS.1m is mapped by default in Mixxx.
Easy customization: We have provided the following customization variables at the top of the script you can set to your liking:
Image courtesy of Stanton Magnetics, Inc., overlay (C) 2009 Sean M. Pappalardo
Refer to the image above, top to bottom
- a buttons: Change the pitch of the deck so that its BPM matches that of the other deck (assuming the pitch range is sufficient)
- b buttons: Toggle headphone cue
- Gain, High, Mid, Low knobs: as labeled
- Pan knob: unused
- c encoders
- Rotate to increase or decrease the pitch range in 1% steps
- Press to toggle the flange effect
- c displays: Show the current pitch adjustment percentage. The back light color changes with the pitch range:
- Green = 1%-25%
- Orange = 25%-50%
- Red = 50% and above
- c A buttons: Permanently lower the pitch by 1%
- c B buttons: Permanently raise the pitch by 1%
- e sliders: Pitch adjust
- e buttons: Temporarily raise the pitch by 4% for as long as held (pitch bend up.)
- g buttons: Temporarily lower the pitch by 4% for as long as held (pitch bend down.)
- d encoders
- Rotate to nudge the track either direction (akin to twisting a record spindle)
- Press to toggle reverse playback
- LEDs show current track position
- d displays: Show the current track time remaining
- d A buttons: Rewind
- d B buttons: Fast-forward
- f sliders: Volume adjust
- f buttons: Play/pause
- h buttons: Cue
Refer to the image above, top to bottom
- z button: Toggle cross fader start
- Master, Headphones, Cue Mix knobs: as labeled
- Zone knob: unused
- Gain knob: unused
- i knob: Adjust flange effect depth
- j knob: Adjust flange effect delay
- k knob: Adjust flange effect period (Low Frequency Oscillator)
- l knob: Adjust master pan (balance)
- p button: unused
- m button: unused
- n button: unused
- o button: unused
- Preset buttons: unused
- Bank Down button: select backward between Library, Playlist, and Browse views
- Bank Up button: select foreward between Library, Playlist, and Browse views
- q button: unused
- r jog wheel:
- Browse mode:
* Rotate to move the track select highlight
* Press to load the selected track into the first stopped deck, if any
* //**Cancel** button: unused//
* //**Enter** button: unused//
* //**Setup** button: unused by Mixxx but will enter the mixer's internal setup menu//
* //**Control** button: currently unused//
* **Browse** button: Selects track browse mode for the jog wheel
(Any unlabeled controls are not currently used.)
Mixxx is a free and open-source DJ software.
Manual
Hardware Compatibility
Reporting Bugs
Getting Involved
Contribution Guidelines
Coding Guidelines
Using Git
Developer Guide
Creating Skins
Contributing Mappings
Mixxx Controls
MIDI Scripting
Components JS
HID Scripting