Machinist X99-RS9 + E5 2673 V3 - which Bios?

[KredensKuchenny]

Hi, which Bios will be good for Machinist X99-RS9 + E5 2673 V3 to make turbo unlock?
EDIT.
This is newest revision of this mobo (with LED screen debuger)

[miyconst]

As far as I know, the new revision of X99-RS9 is still compatible with Huananzhi X99-8M-F BIOS, and this is what I would recommend. Undervolting level is individual per each CPU, but -70/50mv should be a safe start. Nevertheless, I think it's a very bad idea to run E5-2678 V3 on X99-RS9, especially with Turbo Boost Unlock.

[KredensKuchenny]

So after flashing windows sometimes freeze on web browser / other programs... When i improve airflow I will try -60/50 (if exist) or -50/50 mV.
Additionally, I tried to change the bios logo using https://www.reddit.com/r/hackintosh/comments/fa4ay1/guide_how_to_create_your_own_bios_splash_page/ but with no effect

[miyconst]

Did you do the following after flashing a new BIOS?

• Power off PC.
• Clear CMOS.
• Power on PC.
• Go into the BIOS.
• Restore defaults.
• Save and reset.

[KredensKuchenny]

No, after flashing a new BIOS I restore defaults only, but the issue is similar to #35
and exsist only when debug LED screen shows 73, when i see AA (after reboot) everything is good #38
73 error exist every time (on default BIOS too) but after reboot gone and change to AA

[miyconst]

... on default BIOS too

In this case the issue is not related to Turbo Boost Unlock and you need to isolate the problem. Most likely the motherboard is not functioning well.

[KredensKuchenny]

Ok, i find problem which provoke 73 error. Switching fast boot on windows to off resolve issue with 73 error code. After that, new bios with UV + TU works good

[miyconst]

Switching fast boot on windows to off resolve issue with 73 error code.

Thank you for the info!