RSCT Operator

The RSCT Operator enables RSCT on a cluster.

• Deploying the RSCT Operator
  • Installing the RSCT Operator
  • Create RSCT resource
  • Check that the Operator is Running
  • Removing the RSCT Operator

Installing the RSCT Operator

Run the following command to deploy the RSCT Operator:

make deploy

Create RSCT resource

1. Switch to the rsct-operator-system namespace

   oc project rsct-operator-system

2. Create the cluster role binding and RSCT resources

   oc apply -f config/samples/rsct_v1alpha1_rsct.yaml

Check that the Operator is Running

Check that the pods have been created and are running

oc get pods

A readiness probe will check that each pod is running, which can take up to 10 minutes.

Output should be similar to the following

NAME                                              READY   STATUS    RESTARTS   AGE
rsct-operator-controller-manager-b8495fb5-kznsw   2/2     Running   0          10m
rsct-test-9qstd                                   1/1     Running   0          6m49s
rsct-test-gclb2                                   1/1     Running   0          6m49s
rsct-test-gcqjh                                   1/1     Running   0          6m49s
rsct-test-tbvdx                                   1/1     Running   0          6m49s
rsct-test-wt8x9                                   1/1     Running   0          6m49s

Removing the RSCT Operator

Run the following command to remove the RSCT Operator:

make undeploy