Starting point outside

[Mayov17]

Hi, how i can choose the starting point for outside profile milling ? because the starting point actually are not good for me.

Thank you

[mkrabset]

Thanks for your input!
There is currently no support for choosing starting point of a toolpath following a closed loop.

You might get around it by preparing the svg before loading it though
...like discussed here with inkscape.

I guess it's related to this issue: #21.

Would it perhaps help to use attack method Ramp instead of Plunge on your current starting point, so the tool enters the material more gently...if that is the problem ?

-Marius

[Mayov17]

Hi, Thank you for have replied speed. I use plunge and slow speed (80) but the problem are when I have several identical parts machined at the same time the entry point is never in the same place. if I could choose like on cambam I position in a place not visible and always in the same place. I really prefer your software so it would be great to be able to add the option. Sincerely Krabzcam are the best for me and I really appreciate if this option are available. Have a nice day and thank you for have replied. Envoyé à partir de Outlook pour Android<https://aka.ms/AAb9ysg>

…

________________________________ From: Marius Krabset ***@***.***> Sent: Friday, November 24, 2023 12:48:23 PM To: mkrabset/krabzcam ***@***.***> Cc: Mayov17 ***@***.***>; Author ***@***.***> Subject: Re: [mkrabset/krabzcam] Starting point outside (Issue #40) Thanks for your input! There is currently no support for choosing starting point of a toolpath following a closed loop. You might get around it by preparing the svg before loading it though ...like discussed here<https://graphicdesign.stackexchange.com/questions/102657/set-order-start-of-nodes-in-a-closed-shape-path> with inkscape. I guess it's related to this issue: #21<#21>. Would it perhaps help to use attack method Ramp instead of Plunge on your current starting point, so the tool enters the material more gently...if that is the problem ?

-Marius — Reply to this email directly, view it on GitHub<#40 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BEGX45LTMVPH4RPQWEZW3ETYGCCQPAVCNFSM6AAAAAA7YIDETCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRVGU3DANJUHE>. You are receiving this because you authored the thread.Message ID: ***@***.***>

[mkrabset]

Hi, I've added support for changing entry/exit points in profile toolpaths.
Similar to adding tabs, but instead of typing 't', you type 'e' instead (for entry/exit).

I hope this is helpful. Please let me know of any issues.

-Marius

[Mayov17]

Hi, Thank you so much ! Now Krabzcam are really the best tool for CNC 🙏 Thank you so much for your speed solution Have a nice day Envoyé à partir de Outlook pour Android<https://aka.ms/AAb9ysg>

…

________________________________ From: Marius Krabset ***@***.***> Sent: Saturday, November 25, 2023 9:53:44 AM To: mkrabset/krabzcam ***@***.***> Cc: Mayov17 ***@***.***>; Author ***@***.***> Subject: Re: [mkrabset/krabzcam] Starting point outside (Issue #40) Hi, I've added support for changing entry/exit points in profile toolpaths. Similar to adding tabs, but instead of typing 't', you type 'e' instead (for entry/exit). image.png (view on web)<https://github.com/mkrabset/krabzcam/assets/885864/a8682cea-44ea-44c0-9fe2-7e25af971153> I hope this is helpful. Please let me know of any issues.

-Marius — Reply to this email directly, view it on GitHub<#40 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BEGX45JOIHGVXZWTVO3XUYLYGGWZRAVCNFSM6AAAAAA7YIDETCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMRWGI2TOOBZHA>. You are receiving this because you authored the thread.Message ID: ***@***.***>