This library allows an Arduino board to control an AD9833 Programmable Waveform Generator.
Designed primarily to work with an AD9833 Breakout like the one below:
These chips use SPI to communicate so 3 pins are required to interface.
| Arduino Pin | AD9833 Pin |
|---|---|
| Any | FSYNC |
| MOSI (D11) | SDATA |
| SCLK (D13) | SCLK |
This library will NOT setup and configure SPI, that is the user's responsibility. All this library needs to know is which pin is connected to FSYNC. Check out the example to get started.
For more information about this library and documentation please visit https://mmichilot.github.io/AD9833-Library
Written by Matthew Michilot
To download, click the Clone or Download button and select Download ZIP.
Open the Arduino IDE and select Sketch > Include Library > Add .ZIP Library... and navigate to the downloaded zip file. Now the library should be added.
To include it in your sketch, select Sketch and select AD9833 under Contributed libraries.
This line is added to the sketch:
#include <AD9833.h>With that line, the library's functions are now available for use!