dotmg-artifacts

Artifacts related to dotMG, such as shell files, circuit diagrams, etc.

Shell files

Shell files include both 3D-printable STL files, and EPS files for laser cutting (recommended for looks). STL files should be printed with a 0.2mm layer height and supports enabled. They are pre-oriented for best results.

Console

• The front/back faces can either be laser-cut or 3D-printed. Files for both options are included.

• The bezel around the screen can be laser-cut or 3D-printed, though 3D-printing is likely the best option for most because it should be thin. If laser-cutting, multiple thin layers are recommended (one solid-colored layer for bezel, the other a fully transparent layer for protective covering). Lens layers are noted in the lens EPS file names.

• The inner portions of the shell must be 3D-printed.

• Required hardware: 4x nylon hex standoffs (M2.5, 8mm in length), 4x nylon countersink screws (start with 10-15mm and cut to length)

Cart

• The front face can either be laser-cut or 3D-printed. Files for both options are included.

• The back portion of the shell must be 3D-printed.

• Required hardware: 2x nylon hex nuts (M2.5), 2x nylon countersink screws (start with 6mm and cut to length)