Mono Wireless TWELITE SPOT Local Server Example
Set ESP32 as a Wi-Fi access point running an asynchrounous web server.
You can view data received via TWELITE on web browsers.
- Connect USB-C cable and turn on the power.
- Open Wi-Fi settings on your phone and connect to "TWELITE SPOT (XXXX)".
- Open a web browser and access "spot.local" or "192.168.1.1".
- Turn on the TWELITE DIP / CUE / ARIA (factory default settings).
- Open the viewer page to check the data from each TWELITE device.
- Firmware
- App_Wings (>= 1.3.0)
- Environment
- Arduino IDE (1.x)
- ESP32 Arduino core (>= 2.0.5)
- lorol's esp32-fs-plugin (>= 2.0.7)
- Libraries
- MWings (>= 1.0.0)
- Arduino_JSON (>= 0.2.0)
- AsyncTCP (>= 1.1.1)
- ESPAsyncWebServer (>= 1.2.3)
- [Optional] OLED Display 96x96 (>= 1.0.0)
- CSS
- [Included] Flexboxgrid (>= 6.3.2)
- ECMAScript (JavaScript)
- [Included] Chart.js (3.x)
- [Included] chartjs-plugin-streaming (>= 2.0.0)
- [Included] chartjs-adapter-luxon (>= 1.3.1)
- [Included] luxon (>= 3.3.0)
- App_Twelite
- Show digital and analog input states.
- Pre-installed on TWELITE (SMD) and TWELITE DIP series.
- App_CUE (TWELITE CUE mode)
- Show acceleration and magnet state.
- Pre-installed on TWELITE CUE series.
- App_ARIA (TWELITE ARIA mode)
- Show air temperature, relative humidity and magnet state.
- Pre-installed on TWELITE ARIA series.
- Any TWELITE
- Show packet with ASCII-formatted serial input (starts with
:
and ends withCRLF
).
- Show packet with ASCII-formatted serial input (starts with
Copyright (C) 2023 Mono Wireless Inc. All Rights Reserved.
Released under MW-OSSLA-1J,1E (MONO WIRELESS OPEN SOURCE SOFTWARE LICENSE AGREEMENT).