Skip to content

v1.3.0
Compare
Choose a tag to compare
@mp-se mp-se released this 21 Mar 20:04
· 141 commits to master since this release
v1.3.0
0d28376
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

This version is identical with the beta3 version. No changes.

Features

  • Refactored logoutput from WifiManager to be consistent with other logs.
  • Added feature to do backup and restore of device settings. Data will be exported as a text (json) file.
  • Added validation feature that checks for configuration errors or missing steps in setup. Warnings will be displayed on index page.
  • Added restore to factory default button under configuration
  • Upgraded to bootstrap v5.2.3, jquery v3.6.3 and jchart v4.2.1
  • Added feature to check for newer GravityMon releases from gravitymon.com (Will only check against promoted / stable version).
  • Added chip information to startup for easier support
  • Added option to select a default gravity formula under settings. This is based on measurements from several different devices.
  • Increased the number of decimals for tilt/angle (3), temperature (2), plato (2), runtime (2).
  • Added ${battery-percent} as new variable for use in format templates.
  • Added battery saving mode. When battery drops below 20% the sleep interval will be changed to 1 hour. Can be disabled in advanced configuration.

Documentation

  • Updated getting started section to clarify what needs to be done during setup.
  • Updated documentation with new images and text
  • Added new option for home assistant sensor registration through automation script.
  • Added description for how to get voltage measurement on a floaty, see Hardware section.

Issues adressed

  • BUG: Double reset was detected incorrectly on ESP32C3, created own code and dropped douoble reset detection library for better stability. Will now require 3 taps within 3 seconds each to go into wifi configuration.
  • BUG: Gyro and Tempsensor was not detected after a reset on ESP32 (needed power cycle), reverted to older Arduino version to solve the problem.
  • BUG: Pin numbers on the newer ESP32C3 is different from v1
  • BUG: Wrong OTA filename for ESP32C3v1
  • BUG: Fixed long statup delay when creating access point on ESP32C3
  • BUG: Sometimes it could be hard to get into config mode and ended up in wifi portal instead due to double restet detect.
  • BUG: If the gyro value was invalid (moving) during startup that would cause the device to go into gravitymode instead of config mode.
  • BUG: When trying to do calibration without a connected gyro the device would enter endless loop.
  • BUG: Clarified that its the bucket ID and auth TOKEN for influxdb (config page)
  • BUG: Fixed wrong device classes in home assistant template.

Other

  • Removed khoih-prog/ESP_DoubleResetDetector since this didnt work properly on the ESP32c3, this library has no support from author anymore.
  • Updated platformio esp8266 to v4.1.0
  • Updated platformio esp32 to v6.0.0
  • Updated h2zero/NimBLE-Arduino to b 1.4.1
  • Updated 256dpi/arduino-mqtt to v2.5.1
  • Created tag v1.0.0 for codeplea/tinyexpr to get control over releases
  • Created tag v1.0.0 for graphitemaster/incbin to get control over releases
  • Updated khoih-prog/ESP_WiFiManager to v1.12.1
  • Updated khoih-prog/ESP_DoubleResetDetector to v1.3.2
Assets 12