pci: gt64120: Use PCI_CONF1_ADDRESS() macro

PCI gt64120 driver uses standard format of Config Address for PCI
Configuration Mechanism linux-sunxi#1.

So use new U-Boot macro PCI_CONF1_ADDRESS() and remove old custom driver
address macros.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

drivers/pci/pci_gt64120.c

@@ -48,7 +48,7 @@ static int gt_config_access(struct gt64120_pci_controller *gt,
 {
 	unsigned int bus = PCI_BUS(bdf);
 	unsigned int dev = PCI_DEV(bdf);
-	unsigned int devfn = PCI_DEV(bdf) << 3 | PCI_FUNC(bdf);
+	unsigned int func = PCI_FUNC(bdf);
 	u32 intr;
 	u32 addr;
 	u32 val;
@@ -65,10 +65,7 @@ static int gt_config_access(struct gt64120_pci_controller *gt,
 	/* Clear cause register bits */
 	writel(~GT_INTRCAUSE_ABORT_BITS, &gt->regs->intrcause);
 
-	addr = GT_PCI0_CFGADDR_CONFIGEN_BIT;
-	addr |=	bus << GT_PCI0_CFGADDR_BUSNUM_SHF;
-	addr |=	devfn << GT_PCI0_CFGADDR_FUNCTNUM_SHF;
-	addr |= (where / 4) << GT_PCI0_CFGADDR_REGNUM_SHF;
+	addr = PCI_CONF1_ADDRESS(bus, dev, func, where);
 
 	/* Setup address */
 	writel(addr, &gt->regs->pci0_cfgaddr);

include/gt64120.h

@@ -491,18 +491,6 @@
 #define GT_INTRCAUSE_TARABORT0_BIT	GT_INTRCAUSE_TARABORT0_MSK
 
 
-#define GT_PCI0_CFGADDR_REGNUM_SHF	2
-#define GT_PCI0_CFGADDR_REGNUM_MSK	(MSK(6) << GT_PCI0_CFGADDR_REGNUM_SHF)
-#define GT_PCI0_CFGADDR_FUNCTNUM_SHF	8
-#define GT_PCI0_CFGADDR_FUNCTNUM_MSK	(MSK(3) << GT_PCI0_CFGADDR_FUNCTNUM_SHF)
-#define GT_PCI0_CFGADDR_DEVNUM_SHF	11
-#define GT_PCI0_CFGADDR_DEVNUM_MSK	(MSK(5) << GT_PCI0_CFGADDR_DEVNUM_SHF)
-#define GT_PCI0_CFGADDR_BUSNUM_SHF	16
-#define GT_PCI0_CFGADDR_BUSNUM_MSK	(MSK(8) << GT_PCI0_CFGADDR_BUSNUM_SHF)
-#define GT_PCI0_CFGADDR_CONFIGEN_SHF	31
-#define GT_PCI0_CFGADDR_CONFIGEN_MSK	(MSK(1) << GT_PCI0_CFGADDR_CONFIGEN_SHF)
-#define GT_PCI0_CFGADDR_CONFIGEN_BIT	GT_PCI0_CFGADDR_CONFIGEN_MSK
-
 #define GT_PCI0_CMD_MBYTESWAP_SHF	0
 #define GT_PCI0_CMD_MBYTESWAP_MSK	(MSK(1) << GT_PCI0_CMD_MBYTESWAP_SHF)
 #define GT_PCI0_CMD_MBYTESWAP_BIT	GT_PCI0_CMD_MBYTESWAP_MSK