Skip to content

Commit

Permalink
btrfs: qgroup: try to flush qgroup space when we get -EDQUOT
Browse files Browse the repository at this point in the history
[PROBLEM]
There are known problem related to how btrfs handles qgroup reserved
space.  One of the most obvious case is the the test case btrfs/153,
which do fallocate, then write into the preallocated range.

  btrfs/153 1s ... - output mismatch (see xfstests-dev/results//btrfs/153.out.bad)
      --- tests/btrfs/153.out     2019-10-22 15:18:14.068965341 +0800
      +++ xfstests-dev/results//btrfs/153.out.bad      2020-07-01 20:24:40.730000089 +0800
      @@ -1,2 +1,5 @@
       QA output created by 153
      +pwrite: Disk quota exceeded
      +/mnt/scratch/testfile2: Disk quota exceeded
      +/mnt/scratch/testfile2: Disk quota exceeded
       Silence is golden
      ...
      (Run 'diff -u xfstests-dev/tests/btrfs/153.out xfstests-dev/results//btrfs/153.out.bad'  to see the entire diff)

[CAUSE]
Since commit c6887cd ("Btrfs: don't do nocow check unless we have to"),
we always reserve space no matter if it's COW or not.

Such behavior change is mostly for performance, and reverting it is not
a good idea anyway.

For preallcoated extent, we reserve qgroup data space for it already,
and since we also reserve data space for qgroup at buffered write time,
it needs twice the space for us to write into preallocated space.

This leads to the -EDQUOT in buffered write routine.

And we can't follow the same solution, unlike data/meta space check,
qgroup reserved space is shared between data/metadata.
The EDQUOT can happen at the metadata reservation, so doing NODATACOW
check after qgroup reservation failure is not a solution.

[FIX]
To solve the problem, we don't return -EDQUOT directly, but every time
we got a -EDQUOT, we try to flush qgroup space:

- Flush all inodes of the root
  NODATACOW writes will free the qgroup reserved at run_dealloc_range().
  However we don't have the infrastructure to only flush NODATACOW
  inodes, here we flush all inodes anyway.

- Wait for ordered extents
  This would convert the preallocated metadata space into per-trans
  metadata, which can be freed in later transaction commit.

- Commit transaction
  This will free all per-trans metadata space.

Also we don't want to trigger flush multiple times, so here we introduce
a per-root wait list and a new root status, to ensure only one thread
starts the flushing.

Fixes: c6887cd ("Btrfs: don't do nocow check unless we have to")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
  • Loading branch information
adam900710 authored and kdave committed Jul 27, 2020
1 parent 263da81 commit c53e965
Show file tree
Hide file tree
Showing 3 changed files with 96 additions and 8 deletions.
3 changes: 3 additions & 0 deletions fs/btrfs/ctree.h
Expand Up @@ -1012,6 +1012,8 @@ enum {
BTRFS_ROOT_DEAD_TREE,
/* The root has a log tree. Used only for subvolume roots. */
BTRFS_ROOT_HAS_LOG_TREE,
/* Qgroup flushing is in progress */
BTRFS_ROOT_QGROUP_FLUSHING,
};

/*
Expand Down Expand Up @@ -1164,6 +1166,7 @@ struct btrfs_root {
spinlock_t qgroup_meta_rsv_lock;
u64 qgroup_meta_rsv_pertrans;
u64 qgroup_meta_rsv_prealloc;
wait_queue_head_t qgroup_flush_wait;

/* Number of active swapfiles */
atomic_t nr_swapfiles;
Expand Down
1 change: 1 addition & 0 deletions fs/btrfs/disk-io.c
Expand Up @@ -1116,6 +1116,7 @@ static void __setup_root(struct btrfs_root *root, struct btrfs_fs_info *fs_info,
mutex_init(&root->log_mutex);
mutex_init(&root->ordered_extent_mutex);
mutex_init(&root->delalloc_mutex);
init_waitqueue_head(&root->qgroup_flush_wait);
init_waitqueue_head(&root->log_writer_wait);
init_waitqueue_head(&root->log_commit_wait[0]);
init_waitqueue_head(&root->log_commit_wait[1]);
Expand Down
100 changes: 92 additions & 8 deletions fs/btrfs/qgroup.c
Expand Up @@ -3515,17 +3515,58 @@ static int qgroup_unreserve_range(struct btrfs_inode *inode,
}

/*
* Reserve qgroup space for range [start, start + len).
* Try to free some space for qgroup.
*
* This function will either reserve space from related qgroups or doing
* nothing if the range is already reserved.
* For qgroup, there are only 3 ways to free qgroup space:
* - Flush nodatacow write
* Any nodatacow write will free its reserved data space at run_delalloc_range().
* In theory, we should only flush nodatacow inodes, but it's not yet
* possible, so we need to flush the whole root.
*
* Return 0 for successful reserve
* Return <0 for error (including -EQUOT)
* - Wait for ordered extents
* When ordered extents are finished, their reserved metadata is finally
* converted to per_trans status, which can be freed by later commit
* transaction.
*
* NOTE: this function may sleep for memory allocation.
* - Commit transaction
* This would free the meta_per_trans space.
* In theory this shouldn't provide much space, but any more qgroup space
* is needed.
*/
int btrfs_qgroup_reserve_data(struct btrfs_inode *inode,
static int try_flush_qgroup(struct btrfs_root *root)
{
struct btrfs_trans_handle *trans;
int ret;

/*
* We don't want to run flush again and again, so if there is a running
* one, we won't try to start a new flush, but exit directly.
*/
if (test_and_set_bit(BTRFS_ROOT_QGROUP_FLUSHING, &root->state)) {
wait_event(root->qgroup_flush_wait,
!test_bit(BTRFS_ROOT_QGROUP_FLUSHING, &root->state));
return 0;
}

ret = btrfs_start_delalloc_snapshot(root);
if (ret < 0)
goto out;
btrfs_wait_ordered_extents(root, U64_MAX, 0, (u64)-1);

trans = btrfs_join_transaction(root);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
goto out;
}

ret = btrfs_commit_transaction(trans);
out:
clear_bit(BTRFS_ROOT_QGROUP_FLUSHING, &root->state);
wake_up(&root->qgroup_flush_wait);
return ret;
}

static int qgroup_reserve_data(struct btrfs_inode *inode,
struct extent_changeset **reserved_ret, u64 start,
u64 len)
{
Expand Down Expand Up @@ -3578,6 +3619,34 @@ int btrfs_qgroup_reserve_data(struct btrfs_inode *inode,
return ret;
}

/*
* Reserve qgroup space for range [start, start + len).
*
* This function will either reserve space from related qgroups or do nothing
* if the range is already reserved.
*
* Return 0 for successful reservation
* Return <0 for error (including -EQUOT)
*
* NOTE: This function may sleep for memory allocation, dirty page flushing and
* commit transaction. So caller should not hold any dirty page locked.
*/
int btrfs_qgroup_reserve_data(struct btrfs_inode *inode,
struct extent_changeset **reserved_ret, u64 start,
u64 len)
{
int ret;

ret = qgroup_reserve_data(inode, reserved_ret, start, len);
if (ret <= 0 && ret != -EDQUOT)
return ret;

ret = try_flush_qgroup(inode->root);
if (ret < 0)
return ret;
return qgroup_reserve_data(inode, reserved_ret, start, len);
}

/* Free ranges specified by @reserved, normally in error path */
static int qgroup_free_reserved_data(struct btrfs_inode *inode,
struct extent_changeset *reserved, u64 start, u64 len)
Expand Down Expand Up @@ -3746,7 +3815,7 @@ static int sub_root_meta_rsv(struct btrfs_root *root, int num_bytes,
return num_bytes;
}

int __btrfs_qgroup_reserve_meta(struct btrfs_root *root, int num_bytes,
static int qgroup_reserve_meta(struct btrfs_root *root, int num_bytes,
enum btrfs_qgroup_rsv_type type, bool enforce)
{
struct btrfs_fs_info *fs_info = root->fs_info;
Expand All @@ -3773,6 +3842,21 @@ int __btrfs_qgroup_reserve_meta(struct btrfs_root *root, int num_bytes,
return ret;
}

int __btrfs_qgroup_reserve_meta(struct btrfs_root *root, int num_bytes,
enum btrfs_qgroup_rsv_type type, bool enforce)
{
int ret;

ret = qgroup_reserve_meta(root, num_bytes, type, enforce);
if (ret <= 0 && ret != -EDQUOT)
return ret;

ret = try_flush_qgroup(root);
if (ret < 0)
return ret;
return qgroup_reserve_meta(root, num_bytes, type, enforce);
}

void btrfs_qgroup_free_meta_all_pertrans(struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
Expand Down

0 comments on commit c53e965

Please sign in to comment.