Add spmi flash driver #26
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Add devicetree binding for Qualcomm's SPMI Flash LEDs which are part of the PM8941 PMIC. These LEDs are used both as lantern and camera flash on phones based on the MSM8974 SoC, like the Nexus 5. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org>
Add nodes for Qualcomm's SPMI Flash LEDs present in PM8941. There are two white LEDs which can be used as flash or torch. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Add driver for Qualcomm's SPMI Flash LEDs. These are controlled through an SPMI bus and are part of the PM8941 PMIC. There are two LEDs present on the chip, which can be used independently as camera flash or, when in torch mode, as a lantern. Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
okias
reviewed
Dec 24, 2021
| @@ -0,0 +1,93 @@ | |||
| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) | |||
| int rc; | ||
|
|
||
| leds_dev->dev = dev; | ||
|
|
There was a problem hiding this comment.
The patches are from @nfraprado and he was gonna submit a new version to upstream, so maybe he wants to know about these issues.
|
Closing this because we can already use the LPG driver from Bjorn Andersson. |
M0Rf30
pushed a commit
to M0Rf30/linux
that referenced
this pull request
Mar 27, 2023
commit b8caf69 upstream. Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on default RX FIFO depth, e.g. 16. Later during serial startup the qcom_geni_serial_port_setup() updates the RX FIFO depth (port->rx_fifo_depth) to match real device capabilities, e.g. to 32. The RX UART handle code will read "port->rx_fifo_depth" number of words into "port->rx_fifo" buffer, thus exceeding the bounds. This can be observed in certain configurations with Qualcomm Bluetooth HCI UART device and KASAN: Bluetooth: hci0: QCA Product ID :0x00000010 Bluetooth: hci0: QCA SOC Version :0x400a0200 Bluetooth: hci0: QCA ROM Version :0x00000200 Bluetooth: hci0: QCA Patch Version:0x00000d2b Bluetooth: hci0: QCA controller version 0x02000200 Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2 Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2) Bluetooth: hci0: QCA Failed to download patch (-2) ================================================================== BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c Write of size 4 at addr ffff279347d578c0 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty msm8953-mainline#26 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xe0/0xf0 show_stack+0x18/0x40 dump_stack_lvl+0x8c/0xb8 print_report+0x188/0x488 kasan_report+0xb4/0x100 __asan_store4+0x80/0xa4 handle_rx_uart+0xa8/0x18c qcom_geni_serial_handle_rx+0x84/0x9c qcom_geni_serial_isr+0x24c/0x760 __handle_irq_event_percpu+0x108/0x500 handle_irq_event+0x6c/0x110 handle_fasteoi_irq+0x138/0x2cc generic_handle_domain_irq+0x48/0x64 If the RX FIFO depth changes after probe, be sure to resize the buffer. Fixes: f9d690b ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20221221164022.1087814-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alikates
pushed a commit
that referenced
this pull request
Aug 1, 2023
[ Upstream commit 8d21155 ] adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled when unlock. DEADLOCK might happen if we have held other locks and disabled IRQ before invoking it. Fix it by using spin_lock_irqsave() instead, which can keep IRQ state consistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f #26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_interrupt+0xfd/0x420 run_sysvec_on_irqstack_cond sysvec_apic_timer_interrupt+0x46/0xa0 asm_sysvec_apic_timer_interrupt+0x12/0x20 irq event stamp: 837522 hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40 hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50 softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bfqd->lock); <Interrupt> lock(&bfqd->lock); *** DEADLOCK *** 3 locks held by kworker/2:3/388: #0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0 #1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0 #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 stack backtrace: CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kthrotld blk_throtl_dispatch_work_fn Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 print_usage_bug valid_state mark_lock_irq.cold+0x32/0x3a mark_lock+0x693/0xbc0 mark_held_locks+0x9e/0xe0 __trace_hardirqs_on_caller lockdep_hardirqs_on_prepare.part.0+0x151/0x360 trace_hardirqs_on+0x5b/0x180 __raw_spin_unlock_irq _raw_spin_unlock_irq+0x24/0x40 spin_unlock_irq adjust_inuse_and_calc_cost+0x4fb/0x970 ioc_rqos_merge+0x277/0x740 __rq_qos_merge+0x62/0xb0 rq_qos_merge bio_attempt_back_merge+0x12c/0x4a0 blk_mq_sched_try_merge+0x1b6/0x4d0 bfq_bio_merge+0x24a/0x390 __blk_mq_sched_bio_merge+0xa6/0x460 blk_mq_sched_bio_merge blk_mq_submit_bio+0x2e7/0x1ee0 __submit_bio_noacct_mq+0x175/0x3b0 submit_bio_noacct+0x1fb/0x270 blk_throtl_dispatch_work_fn+0x1ef/0x2b0 process_one_work+0x83e/0x13f0 process_scheduled_works worker_thread+0x7e3/0xd80 kthread+0x353/0x470 ret_from_fork+0x1f/0x30 Fixes: b0853ab ("blk-iocost: revamp in-period donation snapbacks") Signed-off-by: Li Nan <linan122@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20230527091904.3001833-1-linan666@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
M0Rf30
pushed a commit
that referenced
this pull request
Dec 31, 2023
[ Upstream commit a524eab ] As of commit b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
fekz115
pushed a commit
to fekz115/linux
that referenced
this pull request
Jan 11, 2024
As of commit b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [msm8953-mainline#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty msm8953-mainline#26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
M0Rf30
pushed a commit
that referenced
this pull request
Feb 17, 2024
commit 56925f3 upstream. With previous patch, one of subtests in test_btf_id becomes flaky and may fail. The following is a failing example: Error: #26 btf Error: #26/174 btf/BTF ID Error: #26/174 btf/BTF ID btf_raw_create:PASS:check 0 nsec btf_raw_create:PASS:check 0 nsec test_btf_id:PASS:check 0 nsec ... test_btf_id:PASS:check 0 nsec test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1 The test tries to prove a btf_id not available after the map is closed. But btf_id is freed only after workqueue and a rcu grace period, compared to previous case just after a rcu grade period. Depending on system workload, workqueue could take quite some time to execute function bpf_map_free_deferred() which may cause the test failure. Instead of adding arbitrary delays, let us remove the logic to check btf_id availability after map is closed. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20231214203820.1469402-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
pmi8950 seems to be using the same flash subsystem as pm8941 so I added a driver which was submitted for upstreaming but hasn't been merged yet.
I updated our pmi8950.dtsi to use the new driver.