Skip to content

Latest commit

 

History

History
83 lines (63 loc) · 3.13 KB

README.md

File metadata and controls

83 lines (63 loc) · 3.13 KB
Raw

Building

The build process is quite long and requires fair knowledge of Linux and its command line.

1. Install Google's repo tool

# Add binary folder
mkdir -p ~/bin
# Add folder to path
PATH=~/bin:$PATH
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo
chmod a+x ~/bin/repo
source ~/.profile

Further reading: https://source.android.com/setup/build/downloading

2. Download the Lineage OS 16.0 source code

You may have to restart your shell after Step 1 to refresh the PATH variable.

Please note that this can take a very long time. At around 3 MB/s, it can take upwards of 1 hour!

# Create soruce directory and cd into it
mkdir -p ~/android/lineage
cd <folder to contain source>
# Initialise repo tool
repo init -u git://github.com/LineageOS/android.git -b lineage-16.0
repo sync

3. Clone Fire device repositories

git clone https://github.com/mt8163/android_device_amazon_karnak device/amazon/karnak
git clone https://github.com/mt8163/android_kernel_amazon_karnak kernel/amazon/karnak
git clone https://github.com/mt8163/android_vendor_amazon_karnak vendor/amazon/karnak

4. Build!

curl  https://raw.githubusercontent.com/488315/build_scripts/master/build.sh > build.sh

Ensure you have adb and fastboot installed and in your path before continuing! Learn how to do this here: https://wiki.lineageos.org/devices/bacon/build#build-lineageos-and-lineageos-recovery

# Ubuntu 16.04 and newer
apt-get install bc bison build-essential ccache curl flex g++-multilib gcc-multilib git gnupg gperf imagemagick lib32ncurses5-dev lib32readline-dev lib32z1-dev liblz4-tool libncurses5-dev libsdl1.2-dev libssl-dev libwxgtk3.0-dev libxml2 libxml2-utils lzop pngcrush rsync schedtool squashfs-tools xsltproc zip zlib1g-dev

# Older than Ubuntu 16.04
apt-get install bc bison build-essential ccache curl flex g++-multilib gcc-multilib git gnupg gperf imagemagick lib32ncurses5-dev lib32readline-dev lib32z1-dev liblz4-tool libncurses5-dev libsdl1.2-dev libssl-dev libwxgtk2.8-dev libxml2 libxml2-utils lzop pngcrush rsync schedtool squashfs-tools xsltproc zip zlib1g-dev

# All versions
croot
source ./build/envsetup.sh
brunch lineage_karnak-userdebug

Improving build times

To speed up subsequent builds, you can enable ccache support. You can do this by running this command before each build:

export USE_CCACHE=1

You can also add this line to your ~/.bashrc file. After, you need to specify the maximum disk space ccache can use:

# 25 GB
ccache -M 25G
# 50 GB (recommended)
ccache -M 50G
# 75 GB
ccache -M 75G

This needs to be run once. Anywhere from 25GB-100GB will result in very noticeably increased build speeds (for instance, a typical 1hr build time can be reduced to 20min). If you’re only building for one device, 25GB-50GB is fine. If you plan to build for several devices that do not share the same kernel source, aim for 75GB-100GB. This space will be permanently occupied on your drive, so take this into consideration.

From Lineage OS Wiki