forked from openwrt/openwrt
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ipq40xx: add support for EnGenius EMD1
SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (1 port) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMD1. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com> [removed BOARD_NAME] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
- Loading branch information
1 parent
52b8c7a
commit 51f3035
Showing
7 changed files
with
263 additions
and
1 deletion.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Binary file not shown.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
233 changes: 233 additions & 0 deletions
233
target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,233 @@ | ||
| // SPDX-License-Identifier: GPL-2.0-or-later | ||
|
|
||
| #include "qcom-ipq4019.dtsi" | ||
| #include <dt-bindings/gpio/gpio.h> | ||
| #include <dt-bindings/input/input.h> | ||
| #include <dt-bindings/soc/qcom,tcsr.h> | ||
|
|
||
| / { | ||
| model = "EnGenius EMD1"; | ||
| compatible = "engenius,emd1"; | ||
|
|
||
| aliases { | ||
| led-boot = &led_power; | ||
| led-failsafe = &led_power; | ||
| led-running = &led_power; | ||
| led-upgrade = &led_power; | ||
| }; | ||
|
|
||
| soc { | ||
| rng@22000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| mdio@90000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| ess-psgmii@98000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| tcsr@1949000 { | ||
| compatible = "qcom,tcsr"; | ||
| reg = <0x1949000 0x100>; | ||
| qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; | ||
| }; | ||
|
|
||
| ess_tcsr@1953000 { | ||
| compatible = "qcom,tcsr"; | ||
| reg = <0x1953000 0x1000>; | ||
| qcom,ess-interface-select = <TCSR_ESS_PSGMII>; | ||
| }; | ||
|
|
||
| tcsr@1957000 { | ||
| compatible = "qcom,tcsr"; | ||
| reg = <0x1957000 0x100>; | ||
| qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; | ||
| }; | ||
|
|
||
| crypto@8e3a000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| watchdog@b017000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| ess-switch@c000000 { | ||
| status = "okay"; | ||
| switch_lan_bmp = <0x20>; | ||
| switch_wan_bmp = <0x00>; | ||
| }; | ||
|
|
||
| edma@c080000 { | ||
| status = "okay"; | ||
| qcom,num_gmac = <1>; | ||
| }; | ||
| }; | ||
|
|
||
| keys { | ||
| compatible = "gpio-keys"; | ||
|
|
||
| reset { | ||
| label = "reset"; | ||
| gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; | ||
| linux,code = <KEY_RESTART>; | ||
| }; | ||
| }; | ||
|
|
||
| leds { | ||
| compatible = "gpio-leds"; | ||
|
|
||
| led_power: power { | ||
| label = "emd1:white:power"; | ||
| gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; | ||
| }; | ||
|
|
||
| wlan2g { | ||
| label = "emd1:red:wlan2g"; | ||
| gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; | ||
| linux,default-trigger = "phy0tpt"; | ||
| }; | ||
|
|
||
| wlan5g { | ||
| label = "emd1:blue:wlan5g"; | ||
| gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; | ||
| linux,default-trigger = "phy1tpt"; | ||
| }; | ||
|
|
||
| mesh { | ||
| label = "emd1:orange:mesh"; | ||
| gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &tlmm { | ||
| serial_pins: serial_pinmux { | ||
| mux { | ||
| pins = "gpio60", "gpio61"; | ||
| function = "blsp_uart0"; | ||
| bias-disable; | ||
| }; | ||
| }; | ||
|
|
||
| spi_0_pins: spi_0_pinmux { | ||
| pin { | ||
| function = "blsp_spi0"; | ||
| pins = "gpio54", "gpio55", "gpio56", "gpio57"; | ||
| drive-strength = <12>; | ||
| bias-disable; | ||
| }; | ||
|
|
||
| pin_cs { | ||
| function = "gpio"; | ||
| pins = "gpio54"; | ||
| drive-strength = <2>; | ||
| bias-disable; | ||
| output-high; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &blsp_dma { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &blsp1_spi1 { | ||
| pinctrl-0 = <&spi_0_pins>; | ||
| pinctrl-names = "default"; | ||
| status = "okay"; | ||
| cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; | ||
|
|
||
| flash@0 { | ||
| compatible = "jedec,spi-nor"; | ||
| reg = <0>; | ||
| spi-max-frequency = <24000000>; | ||
| partitions { | ||
| compatible = "fixed-partitions"; | ||
| #address-cells = <1>; | ||
| #size-cells = <1>; | ||
|
|
||
| partition0@0 { | ||
| label = "0:SBL1"; | ||
| reg = <0x00000000 0x00040000>; | ||
| read-only; | ||
| }; | ||
| partition1@40000 { | ||
| label = "0:MIBIB"; | ||
| reg = <0x00040000 0x00020000>; | ||
| read-only; | ||
| }; | ||
| partition2@60000 { | ||
| label = "0:QSEE"; | ||
| reg = <0x00060000 0x00060000>; | ||
| read-only; | ||
| }; | ||
| partition3@c0000 { | ||
| label = "0:CDT"; | ||
| reg = <0x000c0000 0x00010000>; | ||
| read-only; | ||
| }; | ||
| partition4@d0000 { | ||
| label = "0:DDRPARAMS"; | ||
| reg = <0x000d0000 0x00010000>; | ||
| read-only; | ||
| }; | ||
| partition5@e0000 { | ||
| label = "0:APPSBLENV"; | ||
| reg = <0x000e0000 0x00010000>; | ||
| read-only; | ||
| }; | ||
| partition6@f0000 { | ||
| label = "0:APPSBL"; | ||
| reg = <0x000f0000 0x00080000>; | ||
| read-only; | ||
| }; | ||
| partition7@170000 { | ||
| label = "0:ART"; | ||
| reg = <0x00170000 0x00010000>; | ||
| read-only; | ||
| }; | ||
| partition8@180000 { | ||
| label = "userconfig"; | ||
| reg = <0x00180000 0x00080000>; | ||
| read-only; | ||
| }; | ||
| partition9@200000 { | ||
| compatible = "denx,fit"; | ||
| label = "firmware"; | ||
| reg = <0x200000 0x01e00000>; | ||
| }; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &blsp1_uart1 { | ||
| pinctrl-0 = <&serial_pins>; | ||
| pinctrl-names = "default"; | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &gmac0 { | ||
| qcom,phy_mdio_addr = <4>; | ||
| qcom,poll_required = <1>; | ||
| qcom,forced_speed = <1000>; | ||
| qcom,forced_duplex = <1>; | ||
| vlan_tag = <1 0x20>; | ||
| }; | ||
|
|
||
| &cryptobam { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &wifi0 { | ||
| status = "okay"; | ||
| qcom,ath10k-calibration-variant = "EnGenius-EMD1"; | ||
| }; | ||
|
|
||
| &wifi1 { | ||
| status = "okay"; | ||
| qcom,ath10k-calibration-variant = "EnGenius-EMD1"; | ||
| }; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters