forked from openwrt/openwrt
-
-
Notifications
You must be signed in to change notification settings - Fork 4
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ipq40xx: add MikroTik cAP ac support
This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD (cAP ac), a indoor dual band, dual-radio 802.11ac wireless AP, two 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/cap_ac for more info. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 128 MB - Storage: 16 MB NOR - Wireless: · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port, PoE in and passive PoE out Unsupported: - PoE out Installation: Boot the initramfs image via TFTP and then flash the sysupgrade image using "sysupgrade -n" Signed-off-by: Alar Aun <alar.aun@gmail.com>
- Loading branch information
Showing
10 changed files
with
281 additions
and
1 deletion.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Binary file not shown.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
250 changes: 250 additions & 0 deletions
250
target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,250 @@ | ||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
| /* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */ | ||
|
|
||
| #include "qcom-ipq4019.dtsi" | ||
| #include <dt-bindings/gpio/gpio.h> | ||
| #include <dt-bindings/input/input.h> | ||
| #include <dt-bindings/soc/qcom,tcsr.h> | ||
|
|
||
| / { | ||
| model = "MikroTik cAP ac"; | ||
| compatible = "mikrotik,cap-ac"; | ||
|
|
||
| memory { | ||
| device_type = "memory"; | ||
| reg = <0x80000000 0x08000000>; | ||
| }; | ||
|
|
||
| chosen { | ||
| stdout-path = "serial0:115200n8"; | ||
| }; | ||
|
|
||
| aliases { | ||
| led-boot = &led_user; | ||
| led-failsafe = &led_user; | ||
| led-running = &led_user; | ||
| led-upgrade = &led_user; | ||
| }; | ||
|
|
||
| soc { | ||
| rng@22000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| counter@4a1000 { | ||
| compatible = "qcom,qca-gcnt"; | ||
| reg = <0x4a1000 0x4>; | ||
| }; | ||
|
|
||
| tcsr@1949000 { | ||
| compatible = "qcom,tcsr"; | ||
| reg = <0x1949000 0x100>; | ||
| qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; | ||
| }; | ||
|
|
||
| ess_tcsr@1953000 { | ||
| compatible = "qcom,tcsr"; | ||
| reg = <0x1953000 0x1000>; | ||
| qcom,ess-interface-select = <TCSR_ESS_PSGMII>; | ||
| }; | ||
|
|
||
| tcsr@1957000 { | ||
| compatible = "qcom,tcsr"; | ||
| reg = <0x1957000 0x100>; | ||
| qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; | ||
| }; | ||
|
|
||
| crypto@8e3a000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| watchdog@b017000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| ess-switch@c000000 { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| edma@c080000 { | ||
| status = "okay"; | ||
| qcom,poll_required = <0>; | ||
| qcom,num_gmac = <1>; | ||
| }; | ||
| }; | ||
|
|
||
| keys { | ||
| compatible = "gpio-keys"; | ||
|
|
||
| reset { | ||
| label = "reset"; | ||
| gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; | ||
| linux,code = <KEY_RESTART>; | ||
| }; | ||
|
|
||
| mode { | ||
| label = "mode"; | ||
| gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; | ||
| linux,code = <KEY_LIGHTS_TOGGLE>; | ||
| }; | ||
| }; | ||
|
|
||
| leds { | ||
| compatible = "gpio-leds"; | ||
|
|
||
| power { | ||
| label = "blue:power"; | ||
| gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; | ||
| default-state = "keep"; | ||
| }; | ||
|
|
||
| led_user: user { | ||
| label = "green:user"; | ||
| gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; | ||
| panic-indicator; | ||
| }; | ||
|
|
||
| wlan2g { | ||
| label = "green:wlan2g"; | ||
| gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; | ||
| }; | ||
|
|
||
| wlan5g { | ||
| label = "green:wlan5g"; | ||
| gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; | ||
| }; | ||
|
|
||
| eth1 { | ||
| label = "green:eth1"; | ||
| gpios = <ðphy4 1 GPIO_ACTIVE_HIGH>; | ||
| }; | ||
|
|
||
| eth2 { | ||
| label = "green:eth2"; | ||
| gpios = <ðphy3 1 GPIO_ACTIVE_HIGH>; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &tlmm { | ||
| serial_pins: serial_pinmux { | ||
| mux { | ||
| pins = "gpio60", "gpio61"; | ||
| function = "blsp_uart0"; | ||
| bias-disable; | ||
| }; | ||
| }; | ||
|
|
||
| spi_0_pins: spi_0_pinmux { | ||
| pin { | ||
| function = "blsp_spi0"; | ||
| pins = "gpio55", "gpio56", "gpio57"; | ||
| drive-strength = <2>; | ||
| bias-disable; | ||
| }; | ||
| pin_cs { | ||
| function = "gpio"; | ||
| pins = "gpio54"; | ||
| drive-strength = <2>; | ||
| bias-disable; | ||
| output-high; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &blsp_dma { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &blsp1_spi1 { | ||
| status = "okay"; | ||
|
|
||
| pinctrl-0 = <&spi_0_pins>; | ||
| pinctrl-names = "default"; | ||
| cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; | ||
|
|
||
| flash@0 { | ||
| reg = <0>; | ||
| compatible = "jedec,spi-nor"; | ||
| spi-max-frequency = <40000000>; | ||
|
|
||
| partitions { | ||
| compatible = "fixed-partitions"; | ||
| #address-cells = <1>; | ||
| #size-cells = <1>; | ||
|
|
||
| partition@0 { | ||
| label = "Qualcomm"; | ||
| reg = <0x0 0x80000>; | ||
| read-only; | ||
| }; | ||
|
|
||
| partition@80000 { | ||
| compatible = "mikrotik,routerboot-partitions"; | ||
| #address-cells = <1>; | ||
| #size-cells = <1>; | ||
| label = "RouterBoot"; | ||
| reg = <0x80000 0x80000>; | ||
| read-only; | ||
|
|
||
| hard_config { | ||
| read-only; | ||
| }; | ||
|
|
||
| dtb_config { | ||
| read-only; | ||
| }; | ||
|
|
||
| soft_config { | ||
| }; | ||
| }; | ||
|
|
||
| partition@100000 { | ||
| compatible = "mikrotik,minor"; | ||
| label = "firmware"; | ||
| reg = <0x100000 0xf00000>; | ||
| }; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &blsp1_uart1 { | ||
| status = "okay"; | ||
|
|
||
| pinctrl-0 = <&serial_pins>; | ||
| pinctrl-names = "default"; | ||
| }; | ||
|
|
||
| &cryptobam { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &mdio { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &gmac0 { | ||
| vlan_tag = <0 0x3f>; | ||
| }; | ||
|
|
||
| ðphy3 { | ||
| gpio-controller; | ||
| #gpio-cells = <2>; | ||
| }; | ||
|
|
||
| ðphy4 { | ||
| gpio-controller; | ||
| #gpio-cells = <2>; | ||
| }; | ||
|
|
||
| &wifi0 { | ||
| status = "okay"; | ||
|
|
||
| qcom,ath10k-calibration-variant = "MikroTik-cAP-ac"; | ||
| }; | ||
|
|
||
| &wifi1 { | ||
| status = "okay"; | ||
|
|
||
| qcom,ath10k-calibration-variant = "MikroTik-cAP-ac"; | ||
| }; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters