forked from openwrt/openwrt
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ramips: add support for ASUS RP-AC87
Asus RP-AC87 ac2600 Repeater 2.4GHz 800Mbps 5GHz 1733Mbps Hardware specifications: SoC: MT7621A 2 cores 4 threads @880MHz WiFi2G: MT7615E 2G 4x4 b/g/n Wifi5G: MT7615E 5G 4x4 n/ac DRAM: 128MB DDR3 @1200mhz Flash: 16MB MX25L12805D SPI-NOR LAN/WAN: MT7530 1x1000M MAC addresses as verified by OEM firmware: use address source Lan/W5G *:B0 factory 0x8004 (label) W2G *:B4 factory 0x0 Installation: Asus windows recovery tool: install the Asus firmware restoration utility unplug the router, hold the reset button while powering it on release when the power LED flashes slowly specify a static IP on your computer: IP address: 192.168.1.75 Subnet mask 255.255.255.0 Start the Asus firmware restoration utility, specify the factory image and press upload Do not power off the device after OpenWrt has booted until the LED flashing. TFTP Recovery method: set computer to a static ip, 192.168.1.2 connect computer to the LAN 1 port of the router hold the reset button while powering on the router for a few seconds send firmware image using a tftp client; i.e from linux: $ tftp tftp> binary tftp> connect 192.168.1.1 tftp> put factory.bin tftp> quit Signed-off-by: Tamas Balogh <tamasbalogh@hotmail.com>
- Loading branch information
1 parent
35fec48
commit 74dd7f9
Showing
4 changed files
with
200 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,173 @@ | ||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
||
#include "mt7621.dtsi" | ||
|
||
#include <dt-bindings/gpio/gpio.h> | ||
#include <dt-bindings/input/input.h> | ||
|
||
/ { | ||
compatible = "asus,rp-ac87", "mediatek,mt7621-soc"; | ||
model = "ASUS RP-AC87"; | ||
|
||
aliases { | ||
led-boot = &led_wps; | ||
led-failsafe = &led_wps; | ||
led-running = &led_wps; | ||
led-upgrade = &led_wps; | ||
label-mac-device = &gmac0; | ||
}; | ||
|
||
keys { | ||
compatible = "gpio-keys"; | ||
|
||
reset { | ||
label = "reset"; | ||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>; | ||
linux,code = <KEY_RESTART>; | ||
}; | ||
|
||
wps { | ||
label = "wps"; | ||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>; | ||
linux,code = <KEY_WPS_BUTTON>; | ||
}; | ||
}; | ||
|
||
leds { | ||
compatible = "gpio-leds"; | ||
|
||
led_wps: wps { | ||
label = "green:wps"; | ||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssilow-wlan0 { | ||
label = "green:rssilow-wlan0"; | ||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssimedlow-wlan0 { | ||
label = "green:rssimedlow-wlan0"; | ||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssimed-wlan0 { | ||
label = "green:rssimed-wlan0"; | ||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssihigh-wlan0 { | ||
label = "green:rssihigh-wlan0"; | ||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssilow-wlan1 { | ||
label = "green:rssilow-wlan1"; | ||
gpios = <&gpio 45 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssimedlow-wlan1 { | ||
label = "green:rssimedlow-wlan1"; | ||
gpios = <&gpio 46 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssimed-wlan1 { | ||
label = "green:rssimed-wlan1"; | ||
gpios = <&gpio 47 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
rssihigh-wlan1 { | ||
label = "green:rssihigh-wlan1"; | ||
gpios = <&gpio 48 GPIO_ACTIVE_LOW>; | ||
}; | ||
}; | ||
}; | ||
|
||
&spi0 { | ||
status = "okay"; | ||
|
||
flash@0 { | ||
compatible = "jedec,spi-nor"; | ||
reg = <0>; | ||
spi-max-frequency = <50000000>; | ||
m25p,fast-read; | ||
|
||
partitions { | ||
compatible = "fixed-partitions"; | ||
#address-cells = <1>; | ||
#size-cells = <1>; | ||
|
||
partition@0 { | ||
label = "u-boot"; | ||
reg = <0x0 0x30000>; | ||
read-only; | ||
}; | ||
|
||
partition@30000 { | ||
label = "u-boot-env"; | ||
reg = <0x30000 0x10000>; | ||
read-only; | ||
}; | ||
|
||
factory: partition@40000 { | ||
label = "factory"; | ||
reg = <0x40000 0x10000>; | ||
read-only; | ||
|
||
compatible = "nvmem-cells"; | ||
#address-cells = <1>; | ||
#size-cells = <1>; | ||
|
||
macaddr_factory_8004: macaddr@8004 { | ||
reg = <0x8004 0x6>; | ||
}; | ||
}; | ||
|
||
partition@50000 { | ||
compatible = "denx,uimage"; | ||
label = "firmware"; | ||
reg = <0x50000 0xfb0000>; | ||
}; | ||
}; | ||
}; | ||
}; | ||
|
||
&pcie { | ||
status = "okay"; | ||
}; | ||
|
||
&pcie0 { | ||
wifi@0,0 { | ||
compatible = "mediatek,mt76"; | ||
reg = <0x0000 0 0 0 0>; | ||
mediatek,mtd-eeprom = <&factory 0x0>; | ||
ieee80211-freq-limit = <2400000 2500000>; | ||
}; | ||
}; | ||
|
||
&pcie1 { | ||
wifi@0,0 { | ||
compatible = "mediatek,mt76"; | ||
reg = <0x0000 0 0 0 0>; | ||
mediatek,mtd-eeprom = <&factory 0x8000>; | ||
ieee80211-freq-limit = <5000000 6000000>; | ||
}; | ||
}; | ||
|
||
&gmac0 { | ||
nvmem-cells = <&macaddr_factory_8004>; | ||
nvmem-cell-names = "mac-address"; | ||
}; | ||
|
||
&switch0 { | ||
ports { | ||
port@4 { | ||
status = "okay"; | ||
label = "lan"; | ||
}; | ||
}; | ||
}; | ||
|
||
&xhci { | ||
status = "disabled"; | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters