forked from openwrt/openwrt
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ramips: add support for ASUS RT-AC1200-V2
Hardware specifications: SoC: MT7628DAN MIPS_24KEc@580MHz 2.4G-n 2x2 WiFi: MT7613BEN 5G-ac 160MHz 2x2 Switch: 4x100M built-in SoC Flash: 16MB W25Q128JVSQ SPI-NOR DRAM: 64MB built-in SoC MAC addresses as verified by OEM firmware: use address source Lan/Wan/2G *:60 factory 0x4 (label) 5G *:64 factory 0x8000 Serial console: 57600,8n1 Installation: Asus windows recovery tool: install the Asus firmware restoration utility unplug the router, hold the reset button while powering it on release when the power LED flashes slowly specify a static IP on your computer: IP address: 192.168.1.75 Subnet mask 255.255.255.0 start the Asus firmware restoration utility, specify the factory image and press upload do NOT power off the device after OpenWrt has booted until the LED flashing after flashing OpenWrt, there will be first no 5GHz Wifi available probably, wait until blinking finishes and do a reboot TFTP Recovery method: set computer to a static ip, 192.168.1.75 connect computer to the LAN 1 port of the router hold the reset button while powering on the router for a few seconds send firmware image using a tftp client; i.e from linux: $ tftp tftp> binary tftp> connect 192.168.1.1 tftp> put factory.bin tftp> quit do NOT power off the device after OpenWrt has booted until the LED flashing after flashing OpenWrt, there will be first no 5GHz Wifi available probably, wait until blinking finishes and do a reboot Signed-off-by: Tamas Balogh <tamasbalogh@hotmail.com>
- Loading branch information
1 parent
6f692c9
commit a4bf562
Showing
5 changed files
with
188 additions
and
131 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,32 @@ | ||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
|
||
| #include "mt7628an_asus_rt-ac1200.dtsi" | ||
|
|
||
| / { | ||
| compatible = "asus,rt-ac1200-v2", "mediatek,mt7628an-soc"; | ||
| model = "ASUS RT-AC1200 V2"; | ||
| }; | ||
|
|
||
| &state_default { | ||
| spis { | ||
| groups = "spis"; | ||
| function = "spis"; | ||
| }; | ||
|
|
||
| gpio { | ||
| groups = "refclk", "i2c", "wled_an"; | ||
| function = "gpio"; | ||
| }; | ||
| }; | ||
|
|
||
| &usbphy { | ||
| status = "disabled"; | ||
| }; | ||
|
|
||
| &ehci { | ||
| status = "disabled"; | ||
| }; | ||
|
|
||
| &ohci { | ||
| status = "disabled"; | ||
| }; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,138 @@ | ||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
|
||
| #include "mt7628an.dtsi" | ||
|
|
||
| #include <dt-bindings/gpio/gpio.h> | ||
| #include <dt-bindings/input/input.h> | ||
|
|
||
| / { | ||
| aliases { | ||
| led-boot = &led_wps; | ||
| led-failsafe = &led_wps; | ||
| led-running = &led_wps; | ||
| led-upgrade = &led_wps; | ||
| label-mac-device = ðernet; | ||
| }; | ||
|
|
||
| keys { | ||
| compatible = "gpio-keys"; | ||
|
|
||
| reset { | ||
| label = "reset"; | ||
| gpios = <&gpio 5 GPIO_ACTIVE_LOW>; | ||
| linux,code = <KEY_RESTART>; | ||
| }; | ||
|
|
||
| wps { | ||
| label = "wps"; | ||
| gpios = <&gpio 11 GPIO_ACTIVE_LOW>; | ||
| linux,code = <KEY_WPS_BUTTON>; | ||
| }; | ||
| }; | ||
|
|
||
| leds { | ||
| compatible = "gpio-leds"; | ||
|
|
||
| led_wps: wps { | ||
| label = "blue:wps"; | ||
| gpios = <&gpio 37 GPIO_ACTIVE_LOW>; | ||
| }; | ||
|
|
||
| wlan2g { | ||
| label = "blue:wlan2g"; | ||
| gpios = <&gpio 44 GPIO_ACTIVE_LOW>; | ||
| linux,default-trigger = "phy0tpt"; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &spi0 { | ||
| status = "okay"; | ||
|
|
||
| flash@0 { | ||
| compatible = "jedec,spi-nor"; | ||
| reg = <0>; | ||
| spi-max-frequency = <58000000>; | ||
| m25p,fast-read; | ||
|
|
||
| partitions: partitions { | ||
| compatible = "fixed-partitions"; | ||
| #address-cells = <1>; | ||
| #size-cells = <1>; | ||
|
|
||
| partition@0 { | ||
| label = "u-boot"; | ||
| reg = <0x0 0x30000>; | ||
| read-only; | ||
| }; | ||
|
|
||
| partition@30000 { | ||
| label = "u-boot-env"; | ||
| reg = <0x30000 0x10000>; | ||
| read-only; | ||
| }; | ||
|
|
||
| factory: partition@40000 { | ||
| label = "factory"; | ||
| reg = <0x40000 0x10000>; | ||
| read-only; | ||
|
|
||
| compatible = "nvmem-cells"; | ||
| #address-cells = <1>; | ||
| #size-cells = <1>; | ||
|
|
||
| macaddr_factory_4: macaddr@4 { | ||
| reg = <0x4 0x6>; | ||
| }; | ||
| }; | ||
|
|
||
| partition@50000 { | ||
| compatible = "denx,uimage"; | ||
| label = "firmware"; | ||
| reg = <0x50000 0xfb0000>; | ||
| }; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &gpio { | ||
| enable-leds { | ||
| gpio-hog; | ||
| line-name = "enable-leds"; | ||
| output-low; | ||
| gpios = <4 GPIO_ACTIVE_HIGH>; | ||
| }; | ||
| }; | ||
|
|
||
| ðernet { | ||
| nvmem-cells = <&macaddr_factory_4>; | ||
| nvmem-cell-names = "mac-address"; | ||
| }; | ||
|
|
||
| &esw { | ||
| mediatek,portmap = <0x3e>; | ||
| }; | ||
|
|
||
| &wmac { | ||
| status = "okay"; | ||
|
|
||
| mediatek,mtd-eeprom = <&factory 0x0>; | ||
| }; | ||
|
|
||
| &pcie { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &pcie0 { | ||
| mt76@0,0 { | ||
| compatible = "mediatek,mt76"; | ||
| reg = <0x0000 0 0 0 0>; | ||
| mediatek,mtd-eeprom = <&factory 0x8000>; | ||
| ieee80211-freq-limit = <5000000 6000000>; | ||
|
|
||
| led { | ||
| led-sources = <2>; | ||
| led-active-low; | ||
| }; | ||
| }; | ||
| }; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters