forked from openwrt/openwrt
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ath79: add support for COMFAST CF-E5/E7
COMFAST CF-E5/E7 is a outdoor 4G LTE AP with PoE support, based on
Qualcomm/Atheros QCA9531.
Short specification:
2x 10/100 Mbps Ethernet, with 24v PoE support
64 MB of RAM (DDR2)
16 MB of FLASH (SPI)
2T2R 2.4 GHz, 802.11b/g/n
built-in 1x 3 dBi antennas
output power (max): 80 mW (19 dBm)
Qucetel EC20 LTE MODULE(1x external detachable antenna)
Flash instruction:
Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.
Signed-off-by: Ding Tengfei <dtf@comfast.cn>
[commit subject fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>- Loading branch information
Showing
5 changed files
with
175 additions
and
10 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,141 @@ | ||
| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
| /dts-v1/; | ||
|
|
||
| #include <dt-bindings/gpio/gpio.h> | ||
| #include <dt-bindings/input/input.h> | ||
|
|
||
| #include "qca953x.dtsi" | ||
|
|
||
| / { | ||
| compatible = "comfast,cf-e5", "qca,qca9531"; | ||
| model = "COMFAST CF-E5/E7"; | ||
|
|
||
| keys { | ||
| compatible = "gpio-keys-polled"; | ||
| poll-interval = <20>; | ||
|
|
||
| button0 { | ||
| label = "reset"; | ||
| linux,code = <KEY_RESTART>; | ||
| gpios = <&gpio 17 GPIO_ACTIVE_LOW>; | ||
| }; | ||
| }; | ||
|
|
||
| leds { | ||
| compatible = "gpio-leds"; | ||
| pinctrl-names = "default"; | ||
| pinctrl-0 = <&jtag_disable_pins &led_wan_pin>; | ||
|
|
||
| wan { | ||
| label = "cf-e5:blue:wan"; | ||
| gpios = <&gpio 4 GPIO_ACTIVE_LOW>; | ||
| }; | ||
|
|
||
| lan { | ||
| label = "cf-e5:blue:lan"; | ||
| gpios = <&gpio 16 GPIO_ACTIVE_LOW>; | ||
| }; | ||
|
|
||
| wlan { | ||
| label = "cf-e5:blue:wlan"; | ||
| gpios = <&gpio 0 GPIO_ACTIVE_LOW>; | ||
| linux,default-trigger = "phy0tpt"; | ||
| }; | ||
|
|
||
| rssi0 { | ||
| label = "cf-e5:blue:rssi0"; | ||
| gpios = <&gpio 2 GPIO_ACTIVE_LOW>; | ||
| }; | ||
|
|
||
| rssi1 { | ||
| label = "cf-e5:blue:rssi1"; | ||
| gpios = <&gpio 3 GPIO_ACTIVE_LOW>; | ||
| }; | ||
|
|
||
| rssi2 { | ||
| label = "cf-e5:blue:rssi2"; | ||
| gpios = <&gpio 15 GPIO_ACTIVE_LOW>; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| &uart { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &usb0 { | ||
| #address-cells = <1>; | ||
| #size-cells = <0>; | ||
| status = "okay"; | ||
|
|
||
| hub_port: port@1 { | ||
| reg = <1>; | ||
| #trigger-source-cells = <0>; | ||
| }; | ||
| }; | ||
|
|
||
| &usb_phy { | ||
| status = "okay"; | ||
| }; | ||
|
|
||
| &spi { | ||
| status = "okay"; | ||
| num-cs = <1>; | ||
|
|
||
| flash@0 { | ||
| compatible = "jedec,spi-nor"; | ||
| reg = <0>; | ||
| spi-max-frequency = <25000000>; | ||
|
|
||
| partitions { | ||
| compatible = "fixed-partitions"; | ||
| #address-cells = <1>; | ||
| #size-cells = <1>; | ||
|
|
||
| partition@0 { | ||
| label = "u-boot"; | ||
| reg = <0x000000 0x010000>; | ||
| read-only; | ||
| }; | ||
|
|
||
| art: partition@10000 { | ||
| label = "art"; | ||
| reg = <0x010000 0x010000>; | ||
| read-only; | ||
| }; | ||
|
|
||
| partition@20000 { | ||
| compatible = "denx,uimage"; | ||
| label = "firmware"; | ||
| reg = <0x020000 0xfd0000>; | ||
| }; | ||
|
|
||
| partition@ff0000 { | ||
| label = "art-backup"; | ||
| reg = <0xff0000 0x010000>; | ||
| read-only; | ||
| }; | ||
| }; | ||
| }; | ||
| }; | ||
|
|
||
| ð0 { | ||
| status = "okay"; | ||
| mtd-mac-address = <&art 0x0>; | ||
| phy-handle = <&swphy4>; | ||
| }; | ||
|
|
||
| ð1 { | ||
| mtd-mac-address = <&art 0x6>; | ||
| }; | ||
|
|
||
| &wmac { | ||
| status = "okay"; | ||
| mtd-cal-data = <&art 0x1000>; | ||
| }; | ||
|
|
||
| &pinmux { | ||
| led_wan_pin: pinmux_led_wan_pin { | ||
| pinctrl-single,bits = <0x4 0x0 0xff>; | ||
| }; | ||
| }; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters