forked from openwrt/openwrt
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ramips: add support for Renkforce WS-WN530HP3-A
This adds support for the Renkforce WS-WN530HP3-A ceiling- mountable Wireless Access Point, which is powered over PoE. Hardware: - SoC: Mediatek MT7621DAT - RAM: 128MiB on SoC - Flash: 16MiB GigaDevice GD25Q128C - 2.4Ghz Wifi: Mediatek MT603EN - 5GHz Wifi: MT613BEN - Ethernet: - 1x 1GBit WAN port, passive PoE capable - 2x 1GBit LAN ports LEDs: 1x Bi-Color LED (red/blue) Buttons: 1x Reset Button, 1x Power Button Installation: Power on the access point and immedately press the reset button for 10 seconds. Connect web-browser to 192.168.10.1 and upload sysupgrade image. Flash uploaded image and wait about 2 minutes for reboot. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> Signed-off-by: Petr Štetiar <ynezz@true.cz> [fixed SoB]
- Loading branch information
Showing
3 changed files
with
171 additions
and
0 deletions.
There are no files selected for viewing
159 changes: 159 additions & 0 deletions
159
target/linux/ramips/dts/mt7621_renkforce_ws-wn530hp3-a.dts
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,159 @@ | ||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
||
#include "mt7621.dtsi" | ||
|
||
#include <dt-bindings/gpio/gpio.h> | ||
#include <dt-bindings/input/input.h> | ||
|
||
/ { | ||
compatible = "renkforce,ws-wn530hp3-a", "mediatek,mt7621-soc"; | ||
model = "Renkforce WS-WN530HP3-A"; | ||
|
||
aliases { | ||
label-mac-device = &gmac0; | ||
led-boot = &led_power; | ||
led-failsafe = &led_power; | ||
led-running = &led_power; | ||
led-upgrade = &led_power; | ||
}; | ||
|
||
keys { | ||
compatible = "gpio-keys"; | ||
|
||
reset { | ||
label = "reset"; | ||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>; | ||
linux,code = <KEY_RESTART>; | ||
}; | ||
}; | ||
|
||
leds { | ||
compatible = "gpio-leds"; | ||
|
||
led_power: led_1 { | ||
label = "red:led1"; | ||
gpios = <&gpio 17 GPIO_ACTIVE_LOW>; | ||
}; | ||
|
||
led_2 { | ||
label = "blue:led2"; | ||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; | ||
}; | ||
}; | ||
}; | ||
|
||
&spi0 { | ||
status = "okay"; | ||
|
||
flash@0 { | ||
compatible = "jedec,spi-nor"; | ||
reg = <0>; | ||
spi-max-frequency = <40000000>; | ||
|
||
partitions { | ||
compatible = "fixed-partitions"; | ||
#address-cells = <1>; | ||
#size-cells = <1>; | ||
|
||
partition@0 { | ||
label = "u-boot"; | ||
reg = <0x0 0x30000>; | ||
read-only; | ||
}; | ||
|
||
partition@30000 { | ||
label = "u-boot-env"; | ||
reg = <0x30000 0x10000>; | ||
read-only; | ||
}; | ||
|
||
factory: partition@40000 { | ||
label = "factory"; | ||
reg = <0x40000 0x10000>; | ||
read-only; | ||
}; | ||
|
||
partition@50000 { | ||
compatible = "denx,uimage"; | ||
label = "firmware"; | ||
reg = <0x50000 0xf30000>; | ||
}; | ||
}; | ||
}; | ||
}; | ||
|
||
&pcie { | ||
status = "okay"; | ||
}; | ||
|
||
&pcie0 { | ||
wifi0: wifi@0,0 { | ||
compatible = "mediatek,mt76"; | ||
reg = <0x0000 0 0 0 0>; | ||
mediatek,mtd-eeprom = <&factory 0x0000>; | ||
ieee80211-freq-limit = <2400000 2500000>; | ||
nvmem-cells = <&macaddr_factory_4>; | ||
nvmem-cell-names = "mac-address"; | ||
}; | ||
}; | ||
|
||
&pcie1 { | ||
wifi1: wifi@0,0 { | ||
compatible = "mediatek,mt76"; | ||
reg = <0x0000 0 0 0 0>; | ||
mediatek,mtd-eeprom = <&factory 0x8000>; | ||
ieee80211-freq-limit = <5000000 6000000>; | ||
nvmem-cells = <&macaddr_factory_4>; | ||
nvmem-cell-names = "mac-address"; | ||
mac-address-increment = <1>; | ||
}; | ||
}; | ||
|
||
&gmac0 { | ||
nvmem-cells = <&macaddr_factory_4>; | ||
nvmem-cell-names = "mac-address"; | ||
mac-address-increment = <(-2)>; | ||
}; | ||
|
||
&switch0 { | ||
ports { | ||
port@0 { | ||
status = "okay"; | ||
label = "lan2"; | ||
}; | ||
|
||
port@1 { | ||
status = "okay"; | ||
label = "lan1"; | ||
}; | ||
|
||
port@4 { | ||
status = "okay"; | ||
label = "wan"; | ||
nvmem-cells = <&macaddr_factory_4>; | ||
nvmem-cell-names = "mac-address"; | ||
mac-address-increment = <(-1)>; | ||
}; | ||
}; | ||
}; | ||
|
||
&state_default { | ||
gpio { | ||
groups = "uart2", "jtag", "wdt"; | ||
function = "gpio"; | ||
}; | ||
}; | ||
|
||
&xhci { | ||
status = "disabled"; | ||
}; | ||
|
||
&factory { | ||
compatible = "nvmem-cells"; | ||
#address-cells = <1>; | ||
#size-cells = <1>; | ||
|
||
macaddr_factory_4: macaddr@4 { | ||
reg = <0x4 0x6>; | ||
}; | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters