erc20.sol

/**
 *Submitted for verification at Etherscan.io on 2019-05-17
*/

pragma solidity >=0.5.0;

/**
 * @title ERC20 interface
 * @dev see https://eips.ethereum.org/EIPS/eip-20
 */
interface IERC20 {
    function transfer(address to, uint256 value) external returns (bool);

    function approve(address spender, uint256 value) external returns (bool);

    function transferFrom(address from, address to, uint256 value) external returns (bool);

    function totalSupply() external view returns (uint256);

    function balanceOf(address who) external view returns (uint256);

    function allowance(address owner, address spender) external view returns (uint256);

    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);
}

/**
 * @title SafeMath
 * @dev Unsigned math operations with safety checks that revert on error
 */
library SafeMath {
    /**
     * @dev Multiplies two unsigned integers, reverts on overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b);

        return c;
    }

    /**
     * @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Adds two unsigned integers, reverts on overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a);

        return c;
    }

    /**
     * @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
     * reverts when dividing by zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0);
        return a % b;
    }
}

/**
 * @title Standard ERC20 token
 *
 * @dev Implementation of the basic standard token.
 * https://eips.ethereum.org/EIPS/eip-20
 * Originally based on code by FirstBlood:
 * https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
 *
 * This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
 * all accounts just by listening to said events. Note that this isn't required by the specification, and other
 * compliant implementations may not do it.
 */
contract ERC20 is IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowed;

    uint256 private _totalSupply;

    /**
     * @dev Total number of tokens in existence
     */
    function totalSupply() public view returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev Gets the balance of the specified address.
     * @param owner The address to query the balance of.
     * @return A uint256 representing the amount owned by the passed address.
     */
    function balanceOf(address owner) public view returns (uint256) {
        return _balances[owner];
    }

    /**
     * @dev Function to check the amount of tokens that an owner allowed to a spender.
     * @param owner address The address which owns the funds.
     * @param spender address The address which will spend the funds.
     * @return A uint256 specifying the amount of tokens still available for the spender.
     */
    function allowance(address owner, address spender) public view returns (uint256) {
        return _allowed[owner][spender];
    }

    /**
     * @dev Transfer token to a specified address
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     */
    function transfer(address to, uint256 value) public returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    /**
     * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
     * Beware that changing an allowance with this method brings the risk that someone may use both the old
     * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
     * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     * @param spender The address which will spend the funds.
     * @param value The amount of tokens to be spent.
     */
    function approve(address spender, uint256 value) public returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    /**
     * @dev Transfer tokens from one address to another.
     * Note that while this function emits an Approval event, this is not required as per the specification,
     * and other compliant implementations may not emit the event.
     * @param from address The address which you want to send tokens from
     * @param to address The address which you want to transfer to
     * @param value uint256 the amount of tokens to be transferred
     */
    function transferFrom(address from, address to, uint256 value) public returns (bool) {
        _transfer(from, to, value);
        _approve(from, msg.sender, _allowed[from][msg.sender].sub(value));
        return true;
    }

    /**
     * @dev Increase the amount of tokens that an owner allowed to a spender.
     * approve should be called when _allowed[msg.sender][spender] == 0. To increment
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param addedValue The amount of tokens to increase the allowance by.
     */
    function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowed[msg.sender][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Decrease the amount of tokens that an owner allowed to a spender.
     * approve should be called when _allowed[msg.sender][spender] == 0. To decrement
     * allowed value is better to use this function to avoid 2 calls (and wait until
     * the first transaction is mined)
     * From MonolithDAO Token.sol
     * Emits an Approval event.
     * @param spender The address which will spend the funds.
     * @param subtractedValue The amount of tokens to decrease the allowance by.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
        _approve(msg.sender, spender, _allowed[msg.sender][spender].sub(subtractedValue));
        return true;
    }

    /**
     * @dev Transfer token for a specified addresses
     * @param from The address to transfer from.
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     */
    function _transfer(address from, address to, uint256 value) internal {
        require(to != address(0));

        _balances[from] = _balances[from].sub(value);
        _balances[to] = _balances[to].add(value);
        emit Transfer(from, to, value);
    }

    /**
     * @dev Internal function that mints an amount of the token and assigns it to
     * an account. This encapsulates the modification of balances such that the
     * proper events are emitted.
     * @param account The account that will receive the created tokens.
     * @param value The amount that will be created.
     */
    function _mint(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.add(value);
        _balances[account] = _balances[account].add(value);
        emit Transfer(address(0), account, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account.
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burn(address account, uint256 value) internal {
        require(account != address(0));

        _totalSupply = _totalSupply.sub(value);
        _balances[account] = _balances[account].sub(value);
        emit Transfer(account, address(0), value);
    }

    /**
     * @dev Approve an address to spend another addresses' tokens.
     * @param owner The address that owns the tokens.
     * @param spender The address that will spend the tokens.
     * @param value The number of tokens that can be spent.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        require(spender != address(0));
        require(owner != address(0));

        _allowed[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    /**
     * @dev Internal function that burns an amount of the token of a given
     * account, deducting from the sender's allowance for said account. Uses the
     * internal burn function.
     * Emits an Approval event (reflecting the reduced allowance).
     * @param account The account whose tokens will be burnt.
     * @param value The amount that will be burnt.
     */
    function _burnFrom(address account, uint256 value) internal {
        _burn(account, value);
        _approve(account, msg.sender, _allowed[account][msg.sender].sub(value));
    }
}

/**
 * @title Burnable Token
 * @dev Token that can be irreversibly burned (destroyed).
 */
contract ERC20Burnable is ERC20 {
    /**
     * @dev Burns a specific amount of tokens.
     * @param value The amount of token to be burned.
     */
    function burn(uint256 value) public {
        _burn(msg.sender, value);
    }

    /**
     * @dev Burns a specific amount of tokens from the target address and decrements allowance
     * @param from address The account whose tokens will be burned.
     * @param value uint256 The amount of token to be burned.
     */
    function burnFrom(address from, uint256 value) public {
        _burnFrom(from, value);
    }
}

/**
 * @title ERC20Detailed token
 * @dev The decimals are only for visualization purposes.
 * All the operations are done using the smallest and indivisible token unit,
 * just as on Ethereum all the operations are done in wei.
 */
contract ERC20Detailed is IERC20 {
    string private _name;
    string private _symbol;
    uint8 private _decimals;

    constructor (string memory name, string memory symbol, uint8 decimals) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
    }

    /**
     * @return the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @return the symbol of the token.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @return the number of decimals of the token.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }
}

/**
 * @title Roles
 * @dev Library for managing addresses assigned to a Role.
 */
library Roles {
    struct Role {
        mapping (address => bool) bearer;
    }

    /**
     * @dev give an account access to this role
     */
    function add(Role storage role, address account) internal {
        require(account != address(0));
        require(!has(role, account));

        role.bearer[account] = true;
    }

    /**
     * @dev remove an account's access to this role
     */
    function remove(Role storage role, address account) internal {
        require(account != address(0));
        require(has(role, account));

        role.bearer[account] = false;
    }

    /**
     * @dev check if an account has this role
     * @return bool
     */
    function has(Role storage role, address account) internal view returns (bool) {
        require(account != address(0));
        return role.bearer[account];
    }
}

contract MinterRole {
    using Roles for Roles.Role;

    event MinterAdded(address indexed account);
    event MinterRemoved(address indexed account);

    Roles.Role private _minters;

    constructor () internal {
        _addMinter(msg.sender);
    }

    modifier onlyMinter() {
        require(isMinter(msg.sender));
        _;
    }

    function isMinter(address account) public view returns (bool) {
        return _minters.has(account);
    }

    function addMinter(address account) public onlyMinter {
        _addMinter(account);
    }

    function renounceMinter() public {
        _removeMinter(msg.sender);
    }

    function _addMinter(address account) internal {
        _minters.add(account);
        emit MinterAdded(account);
    }

    function _removeMinter(address account) internal {
        _minters.remove(account);
        emit MinterRemoved(account);
    }
}

/**
 * @title ERC20Mintable
 * @dev ERC20 minting logic
 */
contract ERC20Mintable is ERC20, MinterRole {
    /**
     * @dev Function to mint tokens
     * @param to The address that will receive the minted tokens.
     * @param value The amount of tokens to mint.
     * @return A boolean that indicates if the operation was successful.
     */
    function mint(address to, uint256 value) public onlyMinter returns (bool) {
        _mint(to, value);
        return true;
    }
}

/**
 * @title Ownable
 * @dev The Ownable contract has an owner address, and provides basic authorization control
 * functions, this simplifies the implementation of "user permissions".
 */
contract Ownable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev The Ownable constructor sets the original `owner` of the contract to the sender
     * account.
     */
    constructor () internal {
        _owner = msg.sender;
        emit OwnershipTransferred(address(0), _owner);
    }

    /**
     * @return the address of the owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(isOwner());
        _;
    }

    /**
     * @return true if `msg.sender` is the owner of the contract.
     */
    function isOwner() public view returns (bool) {
        return msg.sender == _owner;
    }

    /**
     * @dev Allows the current owner to relinquish control of the contract.
     * It will not be possible to call the functions with the `onlyOwner`
     * modifier anymore.
     * @notice Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Allows the current owner to transfer control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function transferOwnership(address newOwner) public onlyOwner {
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers control of the contract to a newOwner.
     * @param newOwner The address to transfer ownership to.
     */
    function _transferOwnership(address newOwner) internal {
        require(newOwner != address(0));
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

interface Compliance {
    /**
     *  @dev Checks if a transfer can occur between the from/to addresses.
     *
     *  Both addresses must be whitelisted, unfrozen, and pass all compliance rule checks.
     *  THROWS when the transfer should fail.
     *  @param initiator The address initiating the transfer.
     *  @param from The address of the sender.
     *  @param to The address of the receiver.
     *  @param tokens The number of tokens being transferred.
     *  @return If a transfer can occur between the from/to addresses.
     */
    function canTransfer(address initiator, address from, address to, uint256 tokens) external returns (bool);
}

contract QQQ is ERC20, ERC20Detailed, ERC20Mintable, ERC20Burnable, Ownable {
    uint constant private INITIAL_SUPPLY = 21000000000e18; // 21 Billion
    string constant public NAME = "QQQ Token";
    string constant public SYMBOL = "QQQ";
    uint8 constant public DECIMALS = 18;

    address constant internal ZERO_ADDRESS = address(0);
    Compliance public compliance;

    constructor()
        ERC20()
        ERC20Detailed(NAME, SYMBOL, DECIMALS)
        ERC20Mintable()
        ERC20Burnable()
        Ownable()
        public
    {
        _mint(msg.sender, INITIAL_SUPPLY);
    }

    /**
     *  @dev Sets the compliance contract address to use during transfers.
     *  @param newComplianceAddress The address of the compliance contract.
     */
    function setCompliance(address newComplianceAddress) external onlyOwner {
        compliance = Compliance(newComplianceAddress);
    }

    /**
     * @dev Transfer token to a specified address
     * @param to The address to transfer to.
     * @param value The amount to be transferred.
     */
    function transfer(address to, uint256 value) public returns (bool) {
        bool transferAllowed;
        transferAllowed = canTransfer(msg.sender, to, value);
        if (transferAllowed) {
            _transfer(msg.sender, to, value);
        }
        return transferAllowed;
    }

    /**
     *  @dev Checks if a transfer may take place between the two accounts.
     *
     *   Validates that the transfer can take place.
     *     - Ensure the transfer is compliant
     *  @param from The sender address.
     *  @param to The recipient address.
     *  @param tokens The number of tokens being transferred.
     *  @return If the transfer can take place.
     */
    function canTransfer(address from, address to, uint256 tokens) private returns (bool) {
        // ignore compliance rules when compliance not set.
        if (address(compliance) == ZERO_ADDRESS) {
            return true;
        }
        return compliance.canTransfer(msg.sender, from, to, tokens);
    }
}