An acrylic enclosure designed to accommodate the LimeSDR-USB plus either a GPIO Board or LMS8001 Companion.
A complete kit of parts can be bought from Crowd Supply.
The case design is provided in the following formats:
- DXF
The case parts are laser cut from the following types of acrylic sheet:
- Base : 3mm midnight black (frosted opaque)
- Sides & Top : 3mm glass look (clear with green hue)
Other colours and finishes could be used, and the above were selected for a combination of aesthetic and practical reasons, e.g. frosted finish doesn't pick up finger marks.
In addition to the acrylic parts the kit contains:
| Qty | Item |
|---|---|
| 1 | 5VDC 40x40x10mm fan |
| 1 | 2-pin 0.1" male header |
| 4 | Self-tapping fans screws OR rubber fan mounts |
| 4 | 30mm black nylon M3 F-F hex spacers |
| 4 | M3x5 screws |
| 4 | 12mm black nylon M3 screws |
| 4 | Black nylon M3 nuts |
| 8 | Black steel M3 screws |
| 4 | Rubber bumpers |
- LimeSDR-USB
- LimeSDR GPIO or LMS8001 Companion board
- Panel mount SMA socket to U.FL coaxial cables
Please see the assembly guide
| Version | Date | Summary |
|---|---|---|
| 1.1 | 01/09/2021 | v1.1 to accommodate LimeSDR with USB type A plug |
| 1.0 | 19/12/2017 | Initial version for LimeSDR with USB Type Micro B |
LimeSDR-USB Hacker Case copyright 2017-2021 AB Open Ltd.
This work is licensed under a Creative Commons Attribution 4.0 International License.
