[OrangePi Zero] Linux chip enable conditional statement

Makefile

@@ -26,10 +26,14 @@ ifneq (,$(findstring -lpigpio,$(SHARED_LINKER_LIBS)))
 OBJECTS+=interrupt.o
 endif
 else ifeq ($(DRIVER), SPIDEV)
-OBJECTS+=spi.o gpio.o compatibility.o
+#OBJECTS+=spi.o gpio.o compatibility.o
+OBJECTS+=spi.o compatibility.o
 ifneq (,$(findstring -lpigpio,$(SHARED_LINKER_LIBS)))
 OBJECTS+=interrupt.o
 endif
+ifneq (,$(findstring -lwiringPi,$(SHARED_LINKER_LIBS)))
+OBJECTS+=interrupt.o
+endif
 else ifeq ($(DRIVER), wiringPi)
 OBJECTS+=spi.o
 else ifeq ($(DRIVER), pigpio)

RF24.cpp

@@ -9,7 +9,9 @@
 #include "nRF24L01.h"
 #include "RF24_config.h"
 #include "RF24.h"
-
+#ifdef ORANGEPI
+#include <wiringPi.h>
+#endif
 /****************************************************************************/
 
 void RF24::csn(bool mode)
@@ -102,10 +104,14 @@ void RF24::csn(bool mode)
 
 void RF24::ce(bool level)
 {
+#ifndef RF24_LINUX
     //Allow for 3-pin use on ATTiny
     if (ce_pin != csn_pin) {
+#endif
         digitalWrite(ce_pin, level);
+#ifndef RF24_LINUX
     }
+#endif
 }
 
 /****************************************************************************/
@@ -1031,6 +1037,10 @@ bool RF24::_init_pins()
     gpio.begin(ce_pin, csn_pin);
     #endif
 
+#ifdef ORANGEPI
+    wiringPiSetup();
+#endif
+
     pinMode(ce_pin, OUTPUT);
     ce(LOW);
     delay(100);

configure

@@ -4,6 +4,7 @@ CROSS_CC=arm-linux-gnueabihf-gcc
 CROSS_CXX=arm-linux-gnueabihf-g++
 
 pigpio_detected=0
+wiringPi_detected=0
 
 function help {
 cat <<EOF
@@ -63,6 +64,11 @@ if [[ -f "/usr/lib/libpigpio.so" || -f "/usr/local/lib/libpigpio.so" || -f "/usr
     pigpio_detected=1
 fi
 
+if [[ -f "/usr/lib/libwiringPi.so" || -f "/usr/local/lib/libwiringPi.so" || -f "/usr/arm-linux-gnueabihf/lib/libwiringPi.so" ]]; then
+    echo "[INFO] wiringPi lib found."
+    wiringPi_detected=1
+fi
+
 function die {
     echo "[ERROR] $1"
     exit $2
@@ -414,6 +420,9 @@ SPIDEV)
     if [ $pigpio_detected -eq 1 ]; then
         echo "[INFO] linking to pigpio for interrupt compatibility"
         SHARED_LINKER_LIBS+=" -lpigpio"
+    elif [ $wiringPi_detected -eq 1 ]; then
+        echo "[INFO] linking to wiringPi for interrupt compatibility"
+        SHARED_LINKER_LIBS+=" -lwiringPi"
     else
         CFLAGS+=" -DRF24_NO_INTERRUPT"
     fi

examples_linux/Makefile

@@ -18,7 +18,8 @@ endif
 include ../Makefile.inc
 
 # define all programs
-PROGRAMS = gettingstarted acknowledgementPayloads manualAcknowledgements streamingData multiceiverDemo scanner
+PROGRAMS = gettingstarted
+#PROGRAMS = gettingstarted acknowledgementPayloads manualAcknowledgements streamingData multiceiverDemo scanner
 ifneq (,$(findstring -lpigpio,$(SHARED_LINKER_LIBS)))
 PROGRAMS+=interruptConfigure
 endif

examples_linux/Makefile.examples

@@ -18,7 +18,7 @@ LIBS=-l$(LIB)
 ifeq ($(DRIVER), LittleWire)
 	LIBS+= -llittlewire-spi
 endif
-
+LIBS+=-lwiringPi
 all: $(PROGRAMS)
 
 $(PROGRAMS): $(SOURCES)

examples_linux/gettingstarted.cpp

@@ -25,7 +25,7 @@ using namespace std;
 // ie: RF24 radio(<ce_pin>, <a>*10+<b>); spidev1.0 is 10, spidev1.1 is 11 etc..
 
 // Generic:
-RF24 radio(22, 0);
+RF24 radio(16, 10, 4000000);
 /****************** Linux (BBB,x86,etc) ***********************/
 // See http://nRF24.github.io/RF24/pages.html for more information on usage
 // See http://iotdk.intel.com/docs/master/mraa/ for more information on MRAA

utility/SPIDEV/RF24_arch_config.h

@@ -10,10 +10,15 @@
 #define RF24_UTILITY_SPIDEV_RF24_ARCH_CONFIG_H_
 
 #define RF24_LINUX
+#define ORANGEPI
 
 #include <stddef.h>
 #include "spi.h"
+#ifdef ORANGEPI
+#include <wiringPi.h>
+#else
 #include "gpio.h"
+#endif
 #include "compatibility.h"
 #include <stdint.h>
 #include <stdio.h>
@@ -54,14 +59,16 @@ typedef uint16_t prog_uint16_t;
 #define pgm_read_ptr(p)  (*(void* const*)(p))
 
 // Function, constant map as a result of migrating from Arduino
+#ifndef ORANGEPI
 #define LOW                      GPIO::OUTPUT_LOW
 #define HIGH                     GPIO::OUTPUT_HIGH
 #define INPUT                    GPIO::DIRECTION_IN
 #define OUTPUT                   GPIO::DIRECTION_OUT
 #define digitalWrite(pin, value) GPIO::write(pin, value)
 #define pinMode(pin, direction)  GPIO::open(pin, direction)
-#define delay(milisec)           __msleep(milisec)
 #define delayMicroseconds(usec)  __usleep(usec)
-#define millis()                 __millis()
+#define delay(milisec)           __msleep(milisec)
+#define millis(void)             __millis()
+#endif
 
 #endif // RF24_UTILITY_SPIDEV_RF24_ARCH_CONFIG_H_

utility/SPIDEV/compatibility.h

@@ -18,9 +18,9 @@ extern "C" {
 #include <time.h>
 #include <sys/time.h>
 
-void __msleep(int milisec);
+void __msleep(unsigned int milisec);
 
-void __usleep(int milisec);
+void __usleep(unsigned int milisec);
 
 void __start_timer();
 

utility/SPIDEV/interrupt.cpp

@@ -3,17 +3,30 @@ Interrupt functions
 */
 
 #include "interrupt.h"
+#ifdef ORANGEPI
+#include <wiringPi.h>
+#else
 #include <pigpio.h>
+#endif
 
 int attachInterrupt(int pin, int mode, void (*function)(void))
 {
+#ifdef ORANGEPI
+    wiringPiSetup();
+    return wiringPiISR(pin, mode, function);
+#else
     gpioInitialise();
     return gpioSetISRFunc(pin, mode, 0, (gpioISRFunc_t)function);
+#endif
 }
 
 int detachInterrupt(int pin)
 {
+#ifdef ORANGEPI
+    return wiringPiISR(pin, 0, NULL);
+#else
     return gpioSetISRFunc(pin, 0, 0, NULL);
+#endif
 }
 
 void rfNoInterrupts()

utility/SPIDEV/interrupt.h

@@ -5,12 +5,18 @@ Interrupt functions
 #define __RF24_INTERRUPT_H__
 
 #include "RF24_arch_config.h"
+#ifdef ORANGEPI
+#include <wiringPi.h>
+#else
 #include <pigpio.h>
+#endif
 
+#ifndef ORANGEPI
 #define INT_EDGE_SETUP   0
 #define INT_EDGE_FALLING FALLING_EDGE
 #define INT_EDGE_RISING  RISING_EDGE
 #define INT_EDGE_BOTH    EITHER_EDGE
+#endif
 
 #ifdef __cplusplus
 extern "C" {