- M/B: ASUS PRIME Z390-A(BIOS Ver. 1005)
- CPU: Intel® Core™ i5-9400 Processor
- iGPU: Intel® UHD Graphics 630
- dGPU: AMD Radeon RX 560 4GB
- Lan: Intel® I219V, 1 x Gigabit LAN Controller
- WiFi/Bluetooth: BCM94360CS2
- Audio: Realtek® ALC S1220A 8-Channel High Definition Audio
This Hackintosh build guide is NOT GUARANTEED 100% fully working in your conditions. This guide has been tested on MacOS Mojave, Catalina and Big Sur on an AMD dGPU.
As far as I have been able to test, everything works well except Thunderbolt devices stop working after sleep (but work on boot, tested with Thunderbolt Display and TB3->TB1 adapter).
Some ports in the back were disabled to keep ports within the 15 port limit.
Special Thanks to dhckdgjs (initial repository owner), CaseySJ(at tonymacx86.com) and Newlife(at x86.co.kr).
- FileVault.
- Sleep can be buggy sometimes
- After sleep, Thunderbolt USB devices stop working(?) -- Tested on Thunderbolt display: after sleep peripherals stop working (camera, audio, microphone, usb ports), but display itself still works (you can fix it by unplugging the thunderbolt display from the outlet and waiting a few seconds before replugging it, I think this forces MacOS to repopulate those devices).
- Edit config.plist to have your own SmUUID and Serial Number
- Copy to your EFI folder
- Install MacOS
- Done?
If you need other detailed settings fot this ASUS PRIME Z390-A M/B, please check release file.(like as USBport) Thanks.