8250_pci: fix warnings in backport of Broadcom TruManage support

commit 7400ce7 (v3.4.92-76-g7400ce7ee959)
was a backport of commit ebebd49a8eab5e9aa1b1f8f1614ccc3c2120f886 upstream
("8250/16?50: Add support for Broadcom TruManage redirected serial port")

However, in the context of 3.4.x kernels, the pci setup code was
expecting a struct uart_port and not a struct uart_8250_port, leading to
the following concerning warnings:

drivers/tty/serial/8250/8250_pci.c: In function ‘pci_brcm_trumanage_setup’:
drivers/tty/serial/8250/8250_pci.c:1086:2: warning: passing argument 3 of ‘pci_default_setup’ from incompatible pointer type [enabled by default]
  int ret = pci_default_setup(priv, board, port, idx);
  ^
drivers/tty/serial/8250/8250_pci.c:1036:1: note: expected ‘struct uart_port *’ but argument is of type ‘struct uart_8250_port *’
 pci_default_setup(struct serial_private *priv,
 ^
drivers/tty/serial/8250/8250_pci.c: At top level:
drivers/tty/serial/8250/8250_pci.c:1746:3: warning: initialization from incompatible pointer type [enabled by default]
   .setup  = pci_brcm_trumanage_setup,
   ^
drivers/tty/serial/8250/8250_pci.c:1746:3: warning: (near initialization for ‘pci_serial_quirks[56].setup’) [enabled by default]

I'd also expect the initialization to not function correctly, and
perhaps dereference random garbage due to this.  Since the uart_port
is a field within the uart_8250_port, the adaptation to fix these
warnings is a straightforward removal of a layer of indirection.

Cc: Stephen Hurd <shurd@broadcom.com>
Cc: Michael Chan <mchan@broadcom.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>

drivers/tty/serial/8250/8250_pci.c

@@ -1080,12 +1080,12 @@ pci_omegapci_setup(struct serial_private *priv,
 static int
 pci_brcm_trumanage_setup(struct serial_private *priv,
 			 const struct pciserial_board *board,
-			 struct uart_8250_port *port, int idx)
+			 struct uart_port *port, int idx)
 {
 	int ret = pci_default_setup(priv, board, port, idx);
 
-	port->port.type = PORT_BRCM_TRUMANAGE;
-	port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+	port->type = PORT_BRCM_TRUMANAGE;
+	port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
 	return ret;
 }