microgear-esp8266-rtos

NETPIE client library for ESP8266 RTOS SDK.

Compatibility

The library should work with all ESP8266 modules.

Outgoing Network Port

Make sure ports 8080 and 1883 are allowed to connect from your network.

Limitations

TLS is currently not supported. For the current status please check out mbedtls branch.

Usage Example

#include "WifiController.h"
#include "Microgear.h"

#define STA_SSID      <WIFI_SSID>
#define STA_PASSWORD  <WIFI_PASSWORD>

#define APPID         <APPID>
#define KEY           <KEY>
#define SECRET        <SECRET>
#define ALIAS         <ALIAS>

/*
// enable this to manually assign token
#define TOKEN         <TOKEN>
#define TOKENSECRET   <TOKENSECRET>
*/
Microgear mg;

struct station_config wificonfig = {
    .ssid     = STA_SSID,
    .password = STA_PASSWORD,    
};

void UART_SetBaudrate(uint8_t uart_no, uint32 baud_rate) {
    uart_div_modify(uart_no, UART_CLK_FREQ / baud_rate);
}

void onConnected(char *attribute, uint8_t* msg, uint16_t msglen) {
    os_printf("Connected with NETPIE...\n");    
    microgear_subscribe(&mg,"/#");
}

void onMsghandler(char *topic, uint8_t* msg, uint16_t msglen) {
    uint16_t i;
    os_printf("incoming message --> %s : ",topic);
    for (i=0;i<msglen;i++) {
        os_printf("%c",(char)(msg[i]));
    }
    os_printf("\n");    
}

LOCAL void loop_task(void *pvParameters) {
    while(1) {
        if (microgear_isConnected(&mg)) {
           os_printf("published\n");
           microgear_publish(&mg,"/test","Hello", NULL);
        }
        else {
           os_printf("skip publishing\n");
        }
        vTaskDelay(1000/portTICK_RATE_MS);
    }
}

void ICACHE_FLASH_ATTR user_init(void) {
    // set UART0 buadrate to be 115200
    uart_div_modify(0, UART_CLK_FREQ / 115200); 

    startWifi(&wificonfig);

    microgear_init(&mg, KEY, SECRET, ALIAS);

    #if defined(TOKEN)
        microgear_setToken(&mg, TOKEN, TOKENSECRET, NULL);
    #endif
    microgear_on(&mg, CONNECTED, onConnected);
    microgear_on(&mg, MESSAGE, onMsghandler);

    microgear_connect(&mg, APPID);

    xTaskCreate(loop_task, "loop", 256, NULL, tskIDLE_PRIORITY + 1 , NULL);
}

Note

On the recent version of SDK, you will find the error message regarding missing function user_rf_cal_sector_set(). To fix it just add this code in your project [Ref.]

uint32 ICACHE_FLASH_ATTR user_rf_cal_sector_set(void) {
    flash_size_map size_map = system_get_flash_size_map();
    uint32 rf_cal_sec = 0;

    switch (size_map) {
        case FLASH_SIZE_4M_MAP_256_256:
            rf_cal_sec = 128 - 8;
            break;

        case FLASH_SIZE_8M_MAP_512_512:
            rf_cal_sec = 256 - 5;
            break;

        case FLASH_SIZE_16M_MAP_512_512:
        case FLASH_SIZE_16M_MAP_1024_1024:
            rf_cal_sec = 512 - 5;
            break;

        case FLASH_SIZE_32M_MAP_512_512:
        case FLASH_SIZE_32M_MAP_1024_1024:
            rf_cal_sec = 1024 - 5;
            break;

        default:
            rf_cal_sec = 0;
            break;
    }
    return rf_cal_sec;
}