NRC7292_SW_PKG_v1.3.4_rev03
This is the list of features/issues changes that are added at this release.
Please refer to the detailed release note at RN-7292-001-SW_PKG_release_note (v1.3.4_rev03).pdf
3.1 Features in version 1.3.4_rev03
- N/A
3.2 Resolved issues
- Update exception handling of IP length mismatch for AP’s bridge interface
- Fix invalid HIF header while AP WDT reset
- Fix the starting issue at the cold boot after SW reset
- Fix the country code setting issue after WDT reset
3.3 Changed items
- Remove ‘ieee80211w=2’ in wpa_supplicant configuration files for AU/NZ domain
- Update board data (BD) structure (v1.2)
(1) Make BD usage as default, remove DB-related start.py script parameters
(2) Add a target version in a board data field and compare the value in flash memory - cli_app update
(1) Change the configurable TX max power level from 20 to 30 dBm
(2) Add a CCA threshold setting command: set cca_thresh {CCA threshold}
(3) Display cssid and rx_s1gmcs_map of ‘show uinfo’ result in hexadecimal - Remove triple max limit count scheme for small (<10240ms) BSS max idle period
3.4 Known issues
- Host Mode
o Not Support 6 US CHs for hostapd CH capacity reason
(Not supported CH : 100(BW_1M, 925.5MHz), 104(BW_1M, 926.5MHz),108(BW_1M, 927.5MHz), 112(BW_2M, 927MHz), 116(BW_4M, 926MHz) - MESH
o DHCP failure or delay in multi-hop MBSS
(Note: recommend using static IP in more than 3-hop MBSS)