integration_setup.sh

# SPDX-FileCopyrightText: 2023 Bundesministerium des Innern und für Heimat, PG ZenDiS "Projektgruppe für Aufbau ZenDiS"
# SPDX-FileCopyrightText: 2023 Nextcloud GmbH
# SPDX-License-Identifier: AGPL-3.0-only
#!/usr/bin/env bash

# This bash script is to set up the whole OAUTH configuration between OpenProject and Nextcloud.
# To run this script the Nextcloud and OpenProject instances must be up and running

# variables from environment
# NEXTCLOUD_HOST=<nextcloud_host_url>
# OPENPROJECT_HOST=<openproject_host_url>
# OP_ADMIN_USERNAME=<openproject_admin_username>
# OP_ADMIN_PASSWORD=<openproject_admin_password>
# NC_ADMIN_USERNAME=<nextcloud_admin_username>
# NC_ADMIN_PASSWORD=<nextcloud_admin_password>
# OPENPROJECT_STORAGE_NAME=<openproject_filestorage_name> This variable is the name of the storage which keeps the oauth configuration in OpenProject required for Nextcloud integration.
# SETUP_PROJECT_FOLDER=<true|false> If true then the integration is done with a project folder setup in Nextcloud
# INTEGRATION_SETUP_DEBUG=<true|false> If true then the script will output more details (set -x/-v) and keep the payload files
# INTEGRATION_SETUP_TEMP_DIR=<pre-existing_directory> The payloads sent to the APIs are written into temporary files, by default ./temp, you can specify a custom directory that is expected to pre-exist e.g. when bootstrapping in a K8s job with ephemeral storage.

set -e

INTEGRATION_SETUP_DEFAULT_TEMP_DIR=./temp

# helper functions
log_error() {
  echo -e "\e[31m$1\e[0m"
}

log_info() {
  echo -e "\e[37m$1\e[0m"
}

log_success() {
  echo -e "\e[32m$1\e[0m"
}

# Support for "Debug mode"
if [[ $INTEGRATION_SETUP_DEBUG == "true"  ]]; then
  log_info "Debug mode is enabled"
  set -x
  set -v
fi

if [[ $INTEGRATION_SETUP_TEMP_DIR == ""  ]]; then
  log_info "Using default temp dir: ${INTEGRATION_SETUP_DEFAULT_TEMP_DIR}"
  INTEGRATION_SETUP_TEMP_DIR=${INTEGRATION_SETUP_DEFAULT_TEMP_DIR}
  mkdir -p ${INTEGRATION_SETUP_TEMP_DIR}
else
  log_info "Using ${INTEGRATION_SETUP_TEMP_DIR} as non-default temporary directory"
  if [ ! -d "${INTEGRATION_SETUP_DEFAULT_TEMP_DIR}" ]; then
    log_error "Temporary directory does not exist"
    exit 1
  fi
fi

# if something goes wrong or an error occurs during the setup of the whole integration
# we can delete the storage created in OpenProject, otherwise it would need to be deleted manually when the script is run the next time
deleteOPStorageAndPrintErrorResponse() {
  echo "$1" | jq
  log_error "Setup of OpenProject and Nextcloud integration failed."
  delete_storage_response=$(curl -s -o /dev/null -w "%{http_code}" -X DELETE -u${OP_ADMIN_USERNAME}:${OP_ADMIN_PASSWORD} \
                      ${OPENPROJECT_BASEURL_FOR_STORAGE}/${storage_id} \
                      -H 'accept: application/hal+json' \
                      -H 'Content-Type: application/json' \
                      -H 'X-Requested-With: XMLHttpRequest')
  if [[ ${delete_storage_response} == 204 ]]; then
      log_info "File storage name \"${OPENPROJECT_STORAGE_NAME}\" has been deleted from OpenProject!"
  else
      log_info "Failed to delete file storage \"${OPENPROJECT_STORAGE_NAME}\" from OpenProject!"
  fi
}


# These URLs are just to check if the Nextcloud and OpenProject instances have been started or not before running the script
NEXTCLOUD_HOST_STATE=$(curl -s -X GET ${NEXTCLOUD_HOST}/status.php)
NEXTCLOUD_HOST_INSTALLED_STATE=$(echo $NEXTCLOUD_HOST_STATE | jq -r ".installed")
NEXTCLOUD_HOST_MAINTENANCE_STATE=$(echo $NEXTCLOUD_HOST_STATE | jq -r ".maintenance")
OPENPROJECT_BASEURL_FOR_STORAGE=${OPENPROJECT_HOST}/api/v3/storages
NC_INTEGRATION_BASE_URL=${NEXTCLOUD_HOST}/index.php/apps/integration_openproject
openproject_host_state_response=$(curl -s -X GET -u${OP_ADMIN_USERNAME}:${OP_ADMIN_PASSWORD} ${OPENPROJECT_HOST}/api/v3/configuration)
# These two data are set to "false" when the integration is done without project folder setup
setup_project_folder=false
setup_app_password=false
# Minimum OpenProject version required in order to run this script.
MINIMUM_OP_VERSION="14.2.0"

isNextcloudAdminConfigOk() {
	admin_config_response=$(curl -s -X GET -u${NC_ADMIN_USERNAME}:${NC_ADMIN_PASSWORD} \
				  ${NC_INTEGRATION_BASE_URL}/check-admin-config \
				  -H 'accept: application/hal+json' \
				  -H 'Content-Type: application/json' \
				  -H 'X-Requested-With: XMLHttpRequest')
	config_status_without_project_folder=$(echo $admin_config_response | jq -r ".config_status_without_project_folder")
	project_folder_setup_status=$(echo $admin_config_response | jq -r ".project_folder_setup_status")
	if [[ ${SETUP_PROJECT_FOLDER} == 'true' ]]; then
		if [[ ${project_folder_setup_status} == 'true' && ${config_status_without_project_folder} == 'true' ]]; then
			echo 0
		else
			echo 1
		fi
	elif [[ ${config_status_without_project_folder} == 'true' ]]; then
		echo 0
	else
		echo 1
	fi
}

isOpenProjectFileStorageConfigOk() {
	all_file_storages_available_response=$(curl -s -X GET -u${OP_ADMIN_USERNAME}:${OP_ADMIN_PASSWORD} \
      ${OPENPROJECT_BASEURL_FOR_STORAGE} \
      -H 'accept: application/hal+json' \
      -H 'Content-Type: application/json' \
      -H 'X-Requested-With: XMLHttpRequest'
    )
    oauth_configured_status=$(echo $all_file_storages_available_response | jq -r --arg name "$OPENPROJECT_STORAGE_NAME" '.["_embedded"].elements[] | select(.name == $name) | .configured')
    has_nc_application_password_status=$(echo $all_file_storages_available_response | jq -r --arg name "$OPENPROJECT_STORAGE_NAME" '.["_embedded"].elements[] | select(.name == $name) | .hasApplicationPassword')
	if [[ ${SETUP_PROJECT_FOLDER} == 'true' ]]; then
		if [[ ${oauth_configured_status} == 'true' && ${has_nc_application_password_status} == 'true' ]]; then
			echo 0
		else
			echo 1
		fi
	elif [[ ${oauth_configured_status} == 'true' ]]; then
		echo 0
	else
		echo 1
	fi
}

# check if both instances are started or not
if [[ $(echo $openproject_host_state_response | jq -r "._type") != "Configuration" ]]; then
  if [[ $(echo $openproject_host_state_response | jq -r ".errorIdentifier") == "urn:openproject-org:api:v3:errors:Unauthenticated" ]]; then
    log_error "OpenProject authentication failed!"
    exit 1
  else
    log_error "Unhandled error checking for OpenProject's availability, please checkout the request's response:"
    log_error "${$openproject_host_state_response}"
    exit 1
  fi
fi
if [[ ${NEXTCLOUD_HOST_INSTALLED_STATE} != "true" || ${NEXTCLOUD_HOST_MAINTENANCE_STATE} != "false" ]]; then
  log_error "Nextcloud host cannot be reached or is in maintenance mode!"
  exit 1
fi

# This script requires OpenProject Version >= MINIMUM_OP_VERSION
openproject_info_response=$(curl -s -X GET -u${OP_ADMIN_USERNAME}:${OP_ADMIN_PASSWORD} ${OPENPROJECT_HOST}/api/v3)
openproject_version=$(echo $openproject_info_response | jq -r ".coreVersion")
if [[ "$openproject_version" < "$MINIMUM_OP_VERSION" ]]; then
	log_error "This script requires OpenProject Version greater than or equal to '$MINIMUM_OP_VERSION' but found version '$openproject_version'"
	exit 1
fi

# we can set whether we want the integration with project folder or without it using environment variable 'SETUP_PROJECT_FOLDER'
if [[ ${SETUP_PROJECT_FOLDER} == "true" ]]; then
  # make an api request to get the status of the project folder setup
  project_folder_setup_response=$(curl -s -X GET -u${NC_ADMIN_USERNAME}:${NC_ADMIN_PASSWORD} \
                ${NC_INTEGRATION_BASE_URL}/project-folder-status \
                -H 'accept: application/hal+json' \
                -H 'Content-Type: application/json' \
                -H 'X-Requested-With: XMLHttpRequest')
  isProjectFolderAlreadySetup=$(echo $project_folder_setup_response | jq -r ".result")
  if [[ "$isProjectFolderAlreadySetup" == "true" ]]; then
    setup_project_folder=false
    setup_app_password=true
    setup_method=PATCH
  else
    setup_project_folder=true
    setup_app_password=true
    setup_method=POST
  fi
else
  setup_method=POST
fi

# API call to get openproject_client_id and openproject_client_secret
cat >${INTEGRATION_SETUP_TEMP_DIR}/request_body_1_op_create_storage.json <<EOF
{
  "name":"${OPENPROJECT_STORAGE_NAME}",
  "applicationPassword":"",
  "_links":{
    "origin":{
      "href":"${NEXTCLOUD_HOST}"
    },
    "type":{
      "href":"urn:openproject-org:api:v3:storages:Nextcloud"
    }
  }
}
EOF

create_storage_response=$(curl -s -X POST -u${OP_ADMIN_USERNAME}:${OP_ADMIN_PASSWORD} \
  ${OPENPROJECT_BASEURL_FOR_STORAGE} \
  -H 'accept: application/hal+json' \
  -H 'Content-Type: application/json' \
  -H 'X-Requested-With: XMLHttpRequest' \
  -d @${INTEGRATION_SETUP_TEMP_DIR}/request_body_1_op_create_storage.json
)
if [[ $INTEGRATION_SETUP_DEBUG != "true"  ]]; then rm ${INTEGRATION_SETUP_TEMP_DIR}/request_body_1_op_create_storage.json; fi
# check for errors
response_type=$(echo $create_storage_response | jq -r "._type")
if [[ ${response_type} == "Error" ]]; then
  error_message=$(echo $create_storage_response | jq -r ".message")
  error_id=$(echo $create_storage_response | jq -r ".errorIdentifier")
  if [[ ${error_id} == "urn:openproject-org:api:v3:errors:MultipleErrors" ]]; then
    # If the files storage is already created with the provided Nextcloud host and storage name.
	# We assume that the integration setup is already done in both applications.
	# To check that, we parse the error messages.
	# If there are only two error messages and those are about the Nextcloud host and name being taken.
	# We assume the setup was already completed.
    error_messages_grep=$(echo $create_storage_response | jq -r '.["_embedded"]["errors"] | .[].message')
    readarray -t error_messages <<<"$error_messages_grep"
    error_count=0
    host_already_taken=false
    name_already_taken=false
	for element in "${error_messages[@]}"; do
	  if [[ "$element" == "Host has already been taken." ]]; then
		  host_already_taken=true
	  elif [[ "$element" == "Name has already been taken." ]]; then
		  name_already_taken=true
	  fi
	  (( error_count +=1 ))
	done
    if [[ $host_already_taken != true || $name_already_taken != true || "$error_count" -ne 2  ]]; then
		log_error "Got multiple errors when setting up
		  OP storage: ${OPENPROJECT_STORAGE_NAME}
		  for Nextcloud: '${NEXTCLOUD_HOST}
		  using endpoint: ${OPENPROJECT_BASEURL_FOR_STORAGE}"
		log_error "Error Message(s): ${error_messages_grep}"
		log_info "You could try deleting the file storage '${OPENPROJECT_STORAGE_NAME}' in OpenProject and run the script again."
		exit 1
    fi
    log_success "File storage name '$OPENPROJECT_STORAGE_NAME' in OpenProject already exists."
	# At this point we know that the file storage already exists, so we only check the if it is configured completely in OpenProject
	status_op=$(isOpenProjectFileStorageConfigOk)
	if [[ "$status_op" -ne 0 ]]; then
		log_error "File storage '$OPENPROJECT_STORAGE_NAME' configuration is incomplete in OpenProject '${OPENPROJECT_HOST}' for integration with Nextcloud."
		if [[ ${SETUP_PROJECT_FOLDER} == 'true' ]]; then
			log_error "Or the application password has not been set in 'OpenProject' '${OPENPROJECT_HOST}'."
		fi
		log_info "You could try deleting the file storage '${OPENPROJECT_STORAGE_NAME}' in OpenProject and run the script again."
		exit 1
	fi
	log_success "File storage name '$OPENPROJECT_STORAGE_NAME' in OpenProject for integration with Nextcloud is configured."
    status_nc=$(isNextcloudAdminConfigOk)
    if [[ "$status_nc" -ne 0 ]]; then
    	log_error "Some admin configuration is incomplete in Nextcloud '${NEXTCLOUD_HOST}' for integration with OpenProject."
    	if [[ ${SETUP_PROJECT_FOLDER} == 'true' ]]; then
    		log_error "Or project folder setup might be missing in Nextcloud '${NEXTCLOUD_HOST}'."
    	fi
    	log_info "You could try deleting the file storage '${OPENPROJECT_STORAGE_NAME}' in OpenProject and run the script again."
        exit 1
    fi
    log_success "Admin configuration in Nextcloud for integration with OpenProject is configured."
    log_success "Setup of OpenProject and Nextcloud is complete."
    exit 0
  elif [[ ${error_id} == "urn:openproject-org:api:v3:errors:Unauthenticated" ]]; then
    log_error "Authorization failed. Ensure you have created a valid BASIC AUTH API account, e.g. utilising the following env variables:"
    log_info "OPENPROJECT_AUTHENTICATION_GLOBAL__BASIC__AUTH_USER=<basic_auth_api_username>"
    log_info "OPENPROJECT_AUTHENTICATION_GLOBAL__BASIC__AUTH_PASSWORD=<basic_auth_api_password>"
  else
    log_error "Unhandled error while creating the file storage '${OPENPROJECT_STORAGE_NAME}'"
    log_error "OpenProject returned the following error: '${error_message}'"
    log_info "You could try deleting the file storage '${OPENPROJECT_STORAGE_NAME}' in OpenProject and run the script again."
  fi
  exit 1
fi

# Required information from the above response
storage_id=$(echo $create_storage_response | jq -e '.id')
openproject_client_id=$(echo $create_storage_response | jq -e '._embedded.oauthApplication.clientId')
openproject_client_secret=$(echo $create_storage_response | jq -e '._embedded.oauthApplication.clientSecret')

if [[ ${storage_id} == null ]] || [[ ${openproject_client_id} == null ]] || [[ ${openproject_client_secret} == null ]]; then
  echo "${create_storage_response}" | jq
  log_error "Response does not contain storage_id (id) or openproject_client_id (clientId) or openproject_client_secret (clientSecret)."
  log_error "Setup of OpenProject and Nextcloud integration failed."
  exit 1
fi

log_success "Creating file storage name \"${OPENPROJECT_STORAGE_NAME}\" in OpenProject was successful."

cat >${INTEGRATION_SETUP_TEMP_DIR}/request_body_2_nc_create_storage.json <<EOF
{
  "values":{
    "openproject_instance_url":"${OPENPROJECT_HOST}",
    "openproject_client_id":${openproject_client_id},
    "openproject_client_secret":${openproject_client_secret},
    "default_enable_navigation":false,
    "default_enable_unified_search":false,
    "setup_project_folder":$setup_project_folder,
    "setup_app_password":$setup_app_password
  }
}
EOF
# API call to set the  openproject_client_id and openproject_client_secret to Nextcloud and also get nextcloud_client_id and nextcloud_client_secret
nextcloud_information_response=$(curl -s -X${setup_method} -u${NC_ADMIN_USERNAME}:${NC_ADMIN_PASSWORD} "${NC_INTEGRATION_BASE_URL}/setup" \
  -H 'Content-Type: application/json' \
  -d @${INTEGRATION_SETUP_TEMP_DIR}/request_body_2_nc_create_storage.json
)
if [[ $INTEGRATION_SETUP_DEBUG != "true"  ]] ; then rm ${INTEGRATION_SETUP_TEMP_DIR}/request_body_2_nc_create_storage.json; fi

if [[ ${SETUP_PROJECT_FOLDER} == true ]]; then
  if [[ "$nextcloud_information_response" != *"openproject_user_app_password"* ]]; then
    log_info "The response is missing nextcloud_client_id, nextcloud_client_secret, or openproject_user_app_password"
    deleteOPStorageAndPrintErrorResponse "$nextcloud_information_response"
    log_info "If the error response is related to project folder setup name 'OpenProject' (group, user, folder),"
    log_info "Then follow the link https://www.openproject.org/docs/system-admin-guide/integrations/nextcloud/#troubleshooting to resolve the error."
    exit 1
  fi
  openproject_user_app_password=$(echo $nextcloud_information_response | jq -e ".openproject_user_app_password")
else
  if [[ "$nextcloud_information_response" != *"nextcloud_client_id"* ]] || [[ "$nextcloud_information_response" != *"nextcloud_client_secret"* ]]; then
    log_info "The response is missing nextcloud_client_id or nextcloud_client_secret"
    deleteOPStorageAndPrintErrorResponse "$nextcloud_information_response"
    exit 1
  fi
fi

# required information from the above response
nextcloud_client_id=$(echo $nextcloud_information_response | jq -e ".nextcloud_client_id")
nextcloud_client_secret=$(echo $nextcloud_information_response | jq -e ".nextcloud_client_secret")

log_success "Setting up OpenProject OAUTH configuration in Nextcloud was successful."

cat >${INTEGRATION_SETUP_TEMP_DIR}/request_body_3_op_set_nc_oauth_details.json <<EOF
{
  "clientId": ${nextcloud_client_id},
  "clientSecret": ${nextcloud_client_secret}
}
EOF
# API call to set the nextcloud_client_id and nextcloud_client_secret to OpenProject files storage
set_nextcloud_to_storage_response=$(curl -s -X POST -u${OP_ADMIN_USERNAME}:${OP_ADMIN_PASSWORD} \
                                  ${OPENPROJECT_BASEURL_FOR_STORAGE}/${storage_id}/oauth_client_credentials \
                                  -H 'accept: application/hal+json' \
                                  -H 'Content-Type: application/json' \
                                  -H 'X-Requested-With: XMLHttpRequest' \
                                  -d @${INTEGRATION_SETUP_TEMP_DIR}/request_body_3_op_set_nc_oauth_details.json
)
if [[ $INTEGRATION_SETUP_DEBUG != "true"  ]] ; then rm ${INTEGRATION_SETUP_TEMP_DIR}/request_body_3_op_set_nc_oauth_details.json; fi

# If there is no error from the last API call then the integration can be declared successful
if [[ "$set_nextcloud_to_storage_response" == *"_type"* ]]; then
	response_type=$(echo $set_nextcloud_to_storage_response | jq -r "._type")
	if [[ ${response_type} == "Error" ]]; then
      deleteOPStorageAndPrintErrorResponse "$set_nextcloud_to_storage_response"
      exit 1
    fi
fi

log_success "Setting up Nextcloud OAUTH configuration in OpenProject was successful."

if [[ ${SETUP_PROJECT_FOLDER} == "true" ]]; then
# Save the application password to OpenProject
  cat >${INTEGRATION_SETUP_TEMP_DIR}/request_body_4_op_set_project_folder_app_password.json <<EOF
  {
    "applicationPassword": ${openproject_user_app_password}
  }
EOF
  save_app_password_response=$(curl -s -X PATCH -u${OP_ADMIN_USERNAME}:${OP_ADMIN_PASSWORD} \
                                    ${OPENPROJECT_BASEURL_FOR_STORAGE}/${storage_id} \
                                    -H 'accept: application/hal+json' \
                                    -H 'Content-Type: application/json' \
                                    -H 'X-Requested-With: XMLHttpRequest' \
                                    -d @${INTEGRATION_SETUP_TEMP_DIR}/request_body_4_op_set_project_folder_app_password.json
    )
    if [[ $INTEGRATION_SETUP_DEBUG != "true"  ]] ; then rm ${INTEGRATION_SETUP_TEMP_DIR}/request_body_4_op_set_project_folder_app_password.json; fi

    if [[ "$save_app_password_response" == *"_type"* ]]; then
    	app_password_response_type=$(echo $save_app_password_response | jq -r "._type")
    	if [[ ${app_password_response_type} == "Error" ]]; then
    		deleteOPStorageAndPrintErrorResponse "$save_app_password_response"
            exit 1
    	fi
    	has_application_password=$(echo $save_app_password_response | jq -r ".hasApplicationPassword")
    	if [[ ${has_application_password} == false ]]; then
              deleteOPStorageAndPrintErrorResponse "$save_app_password_response"
              exit 1
        fi
    	log_success "Saving 'OpenProject' user application password to OpenProject was successful."
    fi
fi

log_success "Setup of OpenProject and Nextcloud is complete."