-
Notifications
You must be signed in to change notification settings - Fork 46
NI FGEN Output Attributes
- NIFGEN_ATTRIBUTE_OUTPUT_MODE
- NIFGEN_ATTRIBUTE_OUTPUT_ENABLED
- NIFGEN_ATTRIBUTE_DIGITAL_GAIN
- NIFGEN_ATTRIBUTE_ANALOG_PATH
- NIFGEN_ATTRIBUTE_LOAD_IMPEDANCE
- NIFGEN_ATTRIBUTE_OUTPUT_IMPEDANCE
- NIFGEN_ATTRIBUTE_TERMINAL_CONFIGURATION
- NIFGEN_ATTRIBUTE_COMMON_MODE_OFFSET
- NIFGEN_ATTRIBUTE_CHANNEL_DELAY
- NIFGEN_ATTRIBUTE_ABSOLUTE_DELAY
- NIFGEN_ATTRIBUTE_ANALOG_FILTER_ENABLED
- NIFGEN_ATTRIBUTE_DIGITAL_FILTER_ENABLED
- NIFGEN_ATTRIBUTE_DIGITAL_FILTER_INTERPOLATION_FACTOR
- NIFGEN_ATTRIBUTE_FLATNESS_CORRECTION_ENABLED
- NIFGEN_ATTRIBUTE_ANALOG_DATA_MASK
- NIFGEN_ATTRIBUTE_ANALOG_STATIC_VALUE
- NIFGEN_ATTRIBUTE_DIGITAL_DATA_MASK
- NIFGEN_ATTRIBUTE_DIGITAL_STATIC_VALUE
- NIFGEN_ATTRIBUTE_AUX_POWER_ENABLED
- NIFGEN_ATTRIBUTE_DIGITAL_PATTERN_ENABLED
- NIFGEN_ATTRIBUTE_IDLE_BEHAVIOR
- NIFGEN_ATTRIBUTE_IDLE_VALUE
- NIFGEN_ATTRIBUTE_WAIT_BEHAVIOR
- NIFGEN_ATTRIBUTE_WAIT_VALUE
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1250001 | ViInt32 | R/W | N/A | None | niFgen_ConfigureOutputMode |
Specifies which output mode the signal generator uses. The value that you specify determines which functions and attributes you can use to configure the waveform that the signal generator produces.
Defined Values
NIFGEN_VAL_OUTPUT_FUNC | Standard Function mode— Generates standard function waveforms such as sine, square, triangle, and so on. |
---|---|
NIFGEN_VAL_OUTPUT_FREQ_LIST | Frequency List mode—Generates a standard function using a list of frequencies you define. |
NIFGEN_VAL_OUTPUT_ARB | Arbitrary Waveform mode—Generates waveforms from user-created/provided waveform arrays of numeric data. |
NIFGEN_VAL_OUTPUT_SEQ | Arbitrary Sequence mode —Generates downloaded waveforms in an order your specify. |
NIFGEN_VAL_OUTPUT_SCRIPT | Script mode—Allows you to use scripting to link and loop multiple waveforms in complex combinations. |
Default Value: NIFGEN_VAL_OUTPUT_FUNC
Standard Function
When you set this attribute to NIFGEN_VAL_OUTPUT_FUNC, you can use the following functions to configure the waveform:
- niFgen_ConfigureStandardWaveform
- niFgen_DefineUserStandardWaveform
- niFgen_ClearUserStandardWaveform
- niFgen_ConfigureFrequency
- niFgen_ConfigureAmplitude
And you can set the following attributes:
- NIFGEN_ATTRIBUTE_FUNC_WAVEFORM
- NIFGEN_ATTRIBUTE_FUNC_AMPLITUDE
- NIFGEN_ATTRIBUTE_FUNC_DC_OFFSET
- NIFGEN_ATTRIBUTE_FUNC_FREQUENCY
- NIFGEN_ATTRIBUTE_FUNC_START_PHASE
- NIFGEN_ATTRIBUTE_FUNC_DUTY_CYCLE_HIGH
Frequency List
When you set this attribute to NIFGEN_VAL_OUTPUT_FREQ_LIST, you can use the following functions to configure the waveform:
- niFgen_CreateFreqList
- niFgen_ClearFreqList
- niFgen_QueryFreqListCapabilities
- niFgen_ConfigureFreqList
- niFgen_ConfigureAmplitude
And you can set the following attributes:
- NIFGEN_ATTRIBUTE_FREQ_LIST_HANDLE
- NIFGEN_ATTRIBUTE_FUNC_AMPLITUDE
- NIFGEN_ATTRIBUTE_FUNC_DC_OFFSET
- NIFGEN_ATTRIBUTE_FUNC_START_PHASE
Arbitrary Waveform
When you set this attribute to NIFGEN_VAL_OUTPUT_ARB, you can use the following functions to configure the waveform:
- niFgen_QueryArbWfmCapabilities
- niFgen_CreateWaveformF64
- niFgen_CreateWaveformI16
- niFgen_CreateWaveformFromFileI16
- niFgen_CreateWaveformFromFileF64
- niFgen_CreateWaveformFromFileHWS
- niFgen_ClearArbWaveform
- niFgen_ClearArbMemory
- niFgen_ConfigureSampleRate
- niFgen_ConfigureGain
- niFgen_ConfigureArbWaveform
- niFgen_ConfigureClockMode
And you can set the following attributes:
- NIFGEN_ATTRIBUTE_ARB_WAVEFORM_HANDLE
- NIFGEN_ATTRIBUTE_ARB_GAIN
- NIFGEN_ATTRIBUTE_ARB_OFFSET
- NIFGEN_ATTRIBUTE_ARB_SAMPLE_RATE
- NIFGEN_ATTRIBUTE_CLOCK_MODE
Arbitrary Sequence
When you set this parameter to NIFGEN_VAL_OUTPUT_SEQ, you can use the following functions to configure the sequence:
- niFgen_QueryArbWfmCapabilities
- niFgen_CreateWaveformF64
- niFgen_CreateWaveformI16
- niFgen_CreateWaveformFromFileI16
- niFgen_CreateWaveformFromFileF64
- niFgen_CreateWaveformFromFileHWS
- niFgen_ClearArbWaveform
- niFgen_ClearArbMemory
- niFgen_QueryArbSeqCapabilities
- niFgen_CreateArbSequence
- niFgen_CreateAdvancedArbSequence
- niFgen_ClearArbSequence
- niFgen_ConfigureSampleRate
- niFgen_ConfigureClockMode
- niFgen_ConfigureArbSequence
- niFgen_ConfigureGain
And you can set the following attributes:
- NIFGEN_ATTRIBUTE_ARB_SEQUENCE_HANDLE
- NIFGEN_ATTRIBUTE_ARB_GAIN
- NIFGEN_ATTRIBUTE_ARB_OFFSET
- NIFGEN_ATTRIBUTE_ARB_SAMPLE_RATE
- NIFGEN_ATTRIBUTE_CLOCK_MODE
Script
When you set this parameter to NIFGEN_VAL_OUTPUT_SCRIPT, you can use the following functions to configure the script:
- niFgen_AllocateNamedWaveform
- niFgen_SetNamedWaveformNextWritePosition
- niFgen_WriteNamedWaveformF64
- niFgen_WriteNamedWaveformI16
- niFgen_WriteNamedWaveformComplexF64
- niFgen_WriteNamedWaveformI16
- niFgen_DeleteNamedWaveform
- niFgen_WriteScript
- niFgen_DeleteScript
And you can set the following attribute:
- NIFGEN_ATTRIBUTE_SCRIPT_TO_GENERATE
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1250003 | ViBoolean | R/W | Channel | None | niFgen_ConfigureOutputEnabled |
Specifies whether the signal that the signal generator produces appears at the output connector.
Defined Values
VI_TRUE | Enables the output at the channel output connector. |
---|---|
VI_FALSE | Disables the output at the channel output connector. |
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150254 | ViReal64 | R/W | N/A | None | None |
Specifies a factor by which the signal generator digitally multiplies generated data before converting it to an analog signal in the DAC. For a digital gain greater than 1.0, the product of digital gain times the generated data must be inside the range ±1.0, assuming floating point data. If the product exceeds these limits, the signal generator clips the output signal, and an error results.
Some signal generators support both digital gain and an analog gain, specified with the NIFGEN_ATTRIBUTE_FUNC_AMPLITUDE attribute or NIFGEN_ATTRIBUTE_ARB_GAIN attribute. Digital gain can be changed during generation without the glitches that may occur when changing analog gains, due to relay switching. However, the DAC output resolution is a function of analog gain, so only analog gain makes full use of the resolution of the DAC.
Default Value: 1.0
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150222 | ViInt32 | R/W | N/A | None | None |
Specifies the analog signal path. The main path allows the user to configure gain, offset, analog filter status, output impedance, and output enable.
The direct path presents a much smaller gain range, and you cannot adjust offset or the filter status. The direct path provides a smaller output range but lower distortion. The main path has two amplifier options, high and low gain. Setting this value to NIFGEN_VAL_MAIN_ANALOG_PATH allows NI-FGEN to choose the amplifier based on the user-specified gain.
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Defined Values
NIFGEN_VAL_MAIN_ANALOG_PATH | Specifies use of the main path. NI-FGEN chooses the amplifier based on the user-specified gain. |
---|---|
NIFGEN_VAL_DIRECT_ANALOG_PATH | Specifies use of the direct path. |
NIFGEN_VAL_FIXED_LOW_GAIN_ANALOG_PATH | Specifies use of the low-gain amplifier in the main path, no matter what value the user specifies for gain. This setting limits the output range. |
NIFGEN_VAL_FIXED_HIGH_GAIN_ANALOG_PATH | Specifies use of the high–gain amplifier in the main path. |
Default Value: NIFGEN_VAL_MAIN_ANALOG_PATH
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150220 | ViReal64 | R/W | N/A | None | None |
Specifies the load impedance connected to the analog output of the channel.
If you set this channel-based attribute to NIFGEN_VAL_MATCHED_LOAD_IMPEDANCE (–1.0), NI-FGEN assumes that the load impedance matches the value of the NIFGEN_ATTRIBUTE_OUTPUT_IMPEDANCE attribute. NI-FGEN compensates to give the desired peak-to-peak voltage amplitude or arbitrary gain (relative to 1 V).
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1250004 | ViReal64 | R/W | Channel | None | niFgen_ConfigureOutputImpedance |
Specifies the output impedance of the signal generator at the output connector. NI signal generators have an output impedance of 50 Ω and an optional 75 Ω on select modules.
If the NIFGEN_ATTRIBUTE_LOAD_IMPEDANCE attribute value matches the output impedance, the voltage at the signal output connector is at the necessary level. The voltage at the signal output connector varies with load output impedance, up to doubling the voltage for a high-impedance load.
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Defined Values
NIFGEN_VAL_50_OHMS | The signal generator uses 50.0 Ω of output impedance. |
---|---|
NIFGEN VAL_75_OHMS | The signal generator uses 75.0 Ω of output impedance. |
Default Value: 50.0
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150365 | ViInt32 | R/W | Channel | None | None |
Specifies whether to analyze gain and offset values based on single-ended or differential operation.
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Defined Values
NIFGEN_VAL_SINGLE_ENDED | Specifies that the signal generator is in the single-ended operation mode. |
---|---|
NIFGEN_VAL_DIFFERENTIAL | Specifies that the signal generator is in the differential operation mode. |
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150366 | ViReal64 | R/W | Channel | None | None |
Specifies the value the signal generator adds to or subtracts from the arbitrary waveform data. This attribute applies only when you set the NIFGEN_ATTRIBUTE_TERMINAL_CONFIGURATION attribute to NIFGEN_VAL_DIFFERENTIAL. Common-mode offset is applied to the signals generated at each differential output terminal.
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150369 | ViReal64 | R/W | Channel | None | None |
Specifies the delay to apply to the analog output of the channel specified by the channel string.
You can use the output delay to configure the timing relationship between channels on a multichannel device. Values for this property can be zero or positive. A value of zero indicates that the channels are aligned. A positive value delays the analog output by the specified number of seconds.
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Default Value: 0
Numeric Value | Data type | Access | Coercion | High Level Functions |
---|---|---|---|---|
1150225 | ViReal64 | R/W | None | None |
Specifies the sub-Sample Clock delay, in seconds, to apply to the waveform. Use this attribute to reduce the trigger jitter when synchronizing multiple devices with NI-TClk. This attribute can also help maintain synchronization repeatability by writing the absolute delay value of a previous measurement to the current session.
To set this attribute, the waveform generator must be in the Idle (Configuration) state.
Note: If this attribute is set, NI-TClk cannot perform any sub-Sample Clock adjustment.
Units: seconds (s)
Valid Values: Plus or minus half of one Sample Clock period
Default Value: 0.0
Supported Devices: PXIe-5413/5423/5433
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150103 | ViBoolean | R/W | N/A | None | None |
Specifies whether the signal generator applies an analog filter to the output signal. This attribute is valid in Arbitrary Waveform, Arbitrary Sequence, and Script output modes. You also can use this property in Standard Function and Frequency List output modes for user-defined waveforms.
Defined Values
VI_TRUE | NI-FGEN applies an analog filter. |
---|---|
VI_FALSE | NI-FGEN does not apply an analog filter. |
Default Value: VI_FALSE
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150102 | ViBoolean | R/W | N/A | None | None |
Controls whether the signal generator applies a digital filter to the output signal. This attribute is valid in Arbitrary Waveform, Arbitrary Sequence, and Script output modes. This attribute can also be used in Standard Function and Frequency List output modes for user–defined waveforms.
Defined Values
VI_TRUE | NI-FGEN applies a digital filter. |
---|---|
VI_FALSE | NI-FGEN does not apply a digital filter. |
Default Value: VI_FALSE
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150218 | ViReal64 | R/W | N/A | None | None |
Specifies the interpolation factor when the digital filter is enabled. If you do not set this attribute directly, NI-FGEN automatically selects the maximum interpolation factor allowed for the current sample rate. Valid values are 2, 4, and 8.
Note: You cannot change this property while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150323 | ViBoolean | R/W | N/A | None | None |
Specifies whether flatness correction is enabled. When flatness correction is enabled, the signal generator applies a flatness correction factor to the generated sine wave to ensure the same output power level at all frequencies.
Set this attribute to VI_FALSE when performing flatness calibration.
Defined Values
VI_TRUE | Enables flatness correction. |
---|---|
VI_FALSE | Disables flatness correction. |
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150234 | ViInt32 | R/W | N/A | None | None |
Specifies the mask to apply to the analog output data. The masked data is replaced with the data in the NIFGEN_ATTRIBUTE_ANALOG_STATIC_VALUE attribute.
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150235 | ViInt32 | R/W | N/A | None | None |
Specifies the static value that replaces data masked by the NIFGEN_ATTRIBUTE_ANALOG_DATA_MASK attribute.
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150236 | ViInt32 | R/W | N/A | None | None |
Specifies the mask to apply to the output on the digital connector. The masked data is replaced with the data in the NIFGEN_ATTRIBUTE_DIGITAL_STATIC_VALUE attribute.
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150237 | ViInt32 | R/W | N/A | None | None |
Specifies the static value that replaces data masked by the NIFGEN_ATTRIBUTE_DIGITAL_DATA_MASK attribute.
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150411 | ViBoolean | R/W | N/A | None | None |
Controls the specified auxiliary power pin.
Defined Values
VI_TRUE | Energizes the auxiliary power when the session is committed. |
---|---|
VI_FALSE | The power pin of the connector outputs no power. |
Default Value: VI_FALSE
Numeric Value | Data Type | Access | Applies to | Coercion | High-Level Functions |
---|---|---|---|---|---|
1150101 | ViBoolean | R/W | N/A | None | None |
Specifies whether the signal generator generates a digital pattern corresponding to the output signal.
Defined Values
VI_TRUE | Enables digital pattern output. |
---|---|
VI_FALSE | Disables digital pattern output. |
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150377 | ViInt32 | R/W | N/A | None | None |
Specifies the behavior of the output signal during the Idle state.
Note: You cannot set this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Defined Values
NIFGEN_VAL_HOLD_LAST_VALUE | While in the Idle state, the output signal remains at the last voltage generated prior to entering the Idle state. |
---|---|
NIFGEN_VAL_JUMP_TO_VALUE | While in the Idle state, the output signal remains at the value configured in the NIFGEN_ATTRIBUTE_IDLE_VALUE attribute. |
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150378 | ViInt32 | R/W | N/A | None | None |
Specifies the value to generate in the Idle state. You must set the NIFGEN_ATTRIBUTE_IDLE_BEHAVIOR attribute to NIFGEN_VAL_JUMP_TO_VALUE to use this attribute.
Note: You cannot change this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150379 | ViInt32 | R/W | N/A | None | None |
Specifies the behavior of the output while the device is waiting for a Script trigger or executing a wait instruction.
Note: You cannot set this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Defined Values
NIFGEN_VAL_HOLD_LAST_VALUE (400L) | While in a Wait state, the output signal remains at the last voltage generated prior to entering the Wait state. |
---|---|
NIFGEN_VAL_JUMP_TO_VALUE (401L) | While in a Wait state, the output signal remains at the value configured in the NIFGEN_ATTRIBUTE_WAIT_VALUE attribute. |
Numeric Value | Data type |
Access | Applies to | Coercion | High Level Functions |
---|---|---|---|---|---|
1150380 | ViInt32 | R/W | N/A | None | None |
Specifies the value to generate while waiting. You must set the NIFGEN_ATTRIBUTE_WAIT_BEHAVIOR attribute to NIFGEN_VAL_JUMP_TO_VALUE to use this attribute.
Note: You cannot set this attribute while the device is generating a waveform. If you want to change the device configuration, call the niFgen_AbortGeneration function or wait for the generation to complete.
Creating and Setting Up a gRPC Server
Session Utilities API Reference
gRPC API Differences From C API
Sharing Driver Sessions Between Clients
C API Docs
NI-DAQmx
- gRPC API Differences From C API
- Task Configuration And Control
- Channel Configuration And Creation
- Timing
- Triggering
- Read Functions
- Write Functions
- Export Hardware Signals
- Scale Configuration
- Internal Buffer Configuration
- Advanced Functions
- System Configuration
- Error Handling
- Buffer Attributes
- Calibration Info Attributes
- Channel Attributes
- Device Attributes
- Export Signal Attributes
- Persisted Channel Attributes
- Persisted Scale Attributes
- Persisted Task Attributes
- Physical Channel Attributes
- Read Attributes
- Scale Attributes
- System Attributes
- Task Attributes
- Timing Attributes
- Trigger Attributes
- Watchdog Attributes
- Write Attributes
NI-DCPOWER
- Setup Functions
- Configure Functions
- Measurement Functions
- Control Functions
- Trigger And Event
- Attribute Functions
- Query Functions
- Calibration Functions
- Utility Functions
- Supported Device
- Source Attributes
- Transient Attributes
- Voltage Attributes
- Current Attributes
- Pulse Voltage Attributes
- Pulse Current Attributes
- Cutoff Attributes
- Measurement Attributes
- Trigger Attributes Functions
- Event Attributes
- Advanced Attributes
- Inherent Ivi Attributes
- Supported Device Attributes
NI-DIGITAL PATTERN DRIVER
- Init And Close Functions
- Session Locking Functions
- Utility Functions
- Error Handling Functions
- Calibration Functions
- Attributes Functions
- Pin Map Functions
- Low Level Functions
- Low Level Action Functions
- Pin Control Functions
- Static IO Functions
- Clock Generator Functions
- Levels And Timing Functions
- TDR Functions
- PPMU Configuration Functions
- DC Voltage Functions
- DC Current Functions
- PPMU Action Functions
- Pattern Configuration Functions
- Pattern Action Functions
- History Ram Functions
- Source Memory Functions
- Capture Memory Functions
- Triggers And Events Functions
- Conditional Jump Trigger Functions
- Sequencer Flag Functions
- Sequencer Register Functions
- Match Fail Combination Functions
- Pattern Results Functions
- Sort Results Functions
- Frequency Measurement Functions
- IVI Inherent Attributes
- Specific Driver Information Attributes, Read Only
- Driver Setup Information Attributes
- Device Attributes
- Pin Control Attributes
- Level Configuration Attributes
- Trigger Configuration Attributes
- PPMU Attributes
- Patterns Attributes
- Pattern Opcode Event Attributes
- Timing Offset Attributes
- Keep Alive Attributes
- Frequency Measurement Attributes
- Clock Generator Attributes
- History RAM
- Synchronization Attributes
- TDR Endpoint Termination Attributes
NI-FGEN
- Setup Functions
- Configuration Functions
- Standard Output Functions
- Arbitrary Waveform Output Functions
- Arbitrary Sequence Output Functions
- Incremental Waveform Write Functions
- Configure Clock Functions
- Trigger And Syncronizations Functions
- 5404 Routing Functions
- Script Output Functions
- Configure Onboard Signal Processing Functions
- Configure Peer To Peer Functions
- Attribute Functions
- Waveform Control Functions
- Error Functions
- Output Attributes
- Arbitrary Waveform Attributes
- Data Transfer Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Attributes
- Standard Function Attributes
- Clock Attributes
- Event Attributes
- Triggering Attributes
- Instrument Specific Attributes
- Inherent IVI Attributes
- 5401 5411 5431
NI-RFmx Bluetooth
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Packet Attributes
- Auto Detect Signal Attributes
- Modacc Attributes
- ACP Attributes
- Twenty dB Attributes
- Frequency Range Attributes
- TXP Attributes
- Advanced Attributes
NI-RFmx NR
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attributes Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Signal Detection Attributes
- Component Carrier Attributes
- List Attributes
- Modacc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- TXP Attributes
- Pvt Attributes
- Advanced Attributes
NI-RFmx LTE
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Ch Configuration Functions
- NB IoT Configuration Functions
- ModAcc Configuration Functions
- ACP Configuration Functions
- CHP Configuration Functions
- OBW Configuration Functions
- SEM Configuration Functions
- PVT Configuration Functions
- SlotPhase Configuration Functions
- SlotPower Configuration Functions
- Set And Get Attribute Functions
- ModAcc Fetch Functions
- ACP Fetch Functions
- CHP Fetch Functions
- OBW Fetch Functions
- SEM Fetch Functions
- PVT Fetch Functions
- SlotPhase Fetch Functions
- SlotPower Fetch Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Component Carrier Attributes
- ModAcc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- PVT Attributes
- SlotPhase Attributes
- SlotPower Attributes
- Advanced Attributes
NI-RFmx SpecAn
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Read Functions
- Fetch Functions
- Utility Functions
- Marker Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- ACP Attributes
- Cdf Attributes
- CHP Attributes
- Fcnt Attributes
- Harm Attributes
- OBW Attributes
- SEM Attributes
- Spectrum Attributes
- Spur Attributes
- TXP Attributes
- AMPM Attributes
- Dpd Attributes
- IQ Attributes
- IM Attributes
- NF Attributes
- Phasenoise Attributes
- PAVT Attributes
- Advanced Attributes
NI-RFmx WLAN
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch DSSS ModAcc Functions
- Fetch OFDM ModAcc Functions
- Fetch SEM Functions
- Fetch TXP Functions
- Fetch PowerRamp Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- OFDM Attributes
- Auto Detect Signal Attributes
- DSSS ModAcc Attributes
- OFDM ModAcc Attributes
- SEM Attributes
- TXP Attributes
- PowerRamp Attributes
- Advanced Attributes
NI-RFSA
- General Functions
- Configuration Functions
- Acquisition Functions
- Utility Functions
- Calibration Functions
- General Attributes
- Vertical Attributes
- Signal Path Attributes
- Acquisition Attributes
- Acquisition Attributes
- Triggers Attributes
- Events Attributes
- Device Characteristics Attributes
- Peer To Peer Streaming Attributes
- Configuration List Attributes
- Inherent IVI Properties Attributes
- De-embedding Attributes
- Self Calibration Attributes
- Factory Calibration Attributes
- External Alignment Attributes
- Device Specific Attributes
NI-RFSG
- General Functions
- Generation Configuration
- Utility Functions
- Calibration Functions
- Arb Attributes
- Clock Attributes
- Configuration List Attributes
- De-embedding Attributes
- Device Characteristics Attributes
- Device Specific Attributes
- Events Attributes
- External Calibration Attributes
- Inherent IVI Attributes Attributes
- IQ Impairment Attributes
- Load Configurations Attributes
- Modulation Attributes
- Obsolete Attributes
- Peer To Peer Attributes
- RF Attributes
- Self Calibration Attributes
- Triggers Attributes
NI-SCOPE
- Setup Functions
- Configure Functions
- Attribute Functions
- Acquisition Functions
- Measurement Functions
- Calibrate Functions
- Utility Funcitons
- Error Handling Functions
- IVI Compliance Or Obsolete Functions
- Vertical Attributes
- Horizontal Attributes
- Trigger Attributes
- Clocking Attributes
- Synchronization Attributes
- Acquisition Attributes
- Waveform Measurements Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Streaming Attributes
- Device Attributes
- IVI Or Obsolete Attributes
- Instrument Capabilities Attributes
- If Digitizer Attributes
NI-XNET
- gRPC API differences from C APIs
- General Functions
- Cluster Properties
- Database Properties
- Device Properties
- ECU Properties
- Frame Properties
- Interface Properties
- LIN Schedule Entry Properties
- LIN Schedule Properties
- PDU Properties
- Session Ethernet Properties
- Session Frame Properties
- Session Interface Properties
- Session Properties
- Session SAE J1939 Properties
- Signal Properties
- Subframe Properties
- System Properties
- IP-Stack Functions
- Socket Options
- Socket Functions