Introduction

This repository contains the codes for the Geo-INQUIRE tool to compute the rainfall-induced landslide hazard over an area. This verison of the code assumes a constant 24-h rainfall acummulation over the entire area covered by the susceptibility map.

Getting Started

1. Installation process: The landslide hazard tool requires to have installed python and Poetry.
2. Software dependencies: Python version and dependecies are specified in the Poetry .toml file.

REQUIRED INPUT DATA AND FILES:

Input files must be saved (before running the hazard tool) in the ../Data/ folder: - input_variables.csv: csv file where input rainfall can be specified. - *_sus.tif : Tile of the susceptibility map over hazard will be computed. Must be downloaded from map repository. - StdMaxDayRain.txt: Standard deviation of the maximum daily rainfall.

RUN THE HAZARD TOOL:

1. In place the tile of the susceptibiluty map covering the area you want to compute the hazard in the folder ./Tool-Hazard-Map/input
2. Modify the input_variables.csv excel with the 24 h rainfall acummulation in [mm] you want to check.
3. The code you need to runn is stored in ./Tool-Hazard-Map/Code folder
4. Before you runn the code make sure you have activated the poetry enviroment: poetry shell
5. From the ./Tool-Hazard-Map/Code folder in the terminal run: python Hazard.py
6. The outpurs are stored in the ../Results/constant/ folder.

OUTPUT:

Results from the Hazard Tool are saved in the following folder which is authomatically generated ../Results/constant/

1. Rainfall Hazard: Rainfall hazard class in .tif format. Saved as: ./RainHazard/*_RainHazard.tif
2. Hazard map: in .tif format. Saved as: ./Hazard/*_Hazard.tif

23.04.2024

Contribute

Work in a separate branch. Do a pull request to merge with main. Merging with main requires review.