Skip to content

Opensource firmware for super-easy automation board based on ESP8266-12 (ESP12) in IDF style

License

Notifications You must be signed in to change notification settings

nsfilho/E12AIO3

Folders and files

NameName
Last commit message
Last commit date

Latest commit

Β 

History

88 Commits
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 
Β 

Repository files navigation

Home Automation

ESP8266-RTOS-SDK Build Release

The main goal of this project is provide a simple way to do some 🏠 automation based on a cheap and small board.

Project licensed under: GPLv3 (board and firmware).

Board

The board comes with most of all components soldered from JLCPCB, when you bought with SMT Assembly Services. You need only solder the relays (3x units), KREs (3x 3 vias, 1x 2 vias) and a ESP12 (E or F). Its super easy.

We provide (in portuguese by now) a youtube video describing this process.

Board photo

Files links to order your board:

Characteristcs from this board:

  • Source Voltage: 5v
  • Current (maximum usage, without extensions): 540mA
  • Extension headers: I2C, Analog Input, Additionals GPIO
  • Small size: 70mm x 49mm
  • Manual reset and flash buttons
  • Flash friendly (as describe in FAQ)
  • 3 relays (because it is a cold component -- you can use inside your wall conduit box).

If you want to deep dive, you can see the Schematic File

Web Interface

You can see here a sample screenshot of our HTML5 (and responsive) interface 😍.

Web UI - Dashboard View

If you click at relay status port, you can toggle their state (ON / OFF). Any kind of idea are wellcome. If you are web design, web developer or at least a entusiast and want to contribute with that, please e-mail me.

Firmware

Main features:

  • βœ“ 🏠 Home assistant auto discovery;
  • βœ“ πŸ“‘ Networking detection system (auto soft-ap & station);
  • βœ“ πŸŽ› MQTT Keep Alive;
  • βœ“ 🦾 MQTT Library updated version (handle many messages in a short time);
  • βœ“ πŸ›  Web Configuration (mobile-first)
  • βœ“ πŸ•Ή Web API
  • βœ“ πŸŽ‰ OTA (Over-the-air) Firmware Update
  • ⚑︎ Physical GPIO: I2C Oled, Binary Sensor, Button Sensor (with debouncing) - backlog

OTA Firmware URL

You can update your board using a github url: https://nsfilho.github.io/E12AIO3/e12aio3.bin. When we release a new version, automatically (by github actions) comes available in this url.

Flash Firmware

You can find many ways to flash your board. We show bellow 2 distinct methods. The first, using a more sophisticated environment (like a developer) and the second a little more easy.

Method 1: Exists two different ways to do that. First using the Espress IDF (as tooling), you can:

make all
make erase_flash upload_spiffs flash

Method 2: Using esptool.py

For install esptool.py you can use PlatformIO CLI.

Important: don't forget to put PlatformIO binary folder in your path.

After install, you need prepare the environment, as showed bellow:

pio platform install espressif8266 --with-all-packages
ls ~/.platformio/packages/tool-esptoolpy/

Now you are ready to flash, first download the files in release section, if you download in zip format, extract it.

You need replace the following information, in the command bellow:

  1. /dev/cu.SLAB_USBtoUART for your serial-usb port;
  2. 0x310000 address - could change because we are in a revision process of partitions.csv;
python ~/.platformio/packages/tool-esptoolpy/esptool.py --port /dev/cu.SLAB_USBtoUART erase_flash
python ~/.platformio/packages/tool-esptoolpy/esptool.py --port /dev/cu.SLAB_USBtoUART write_flash 0x310000 spiffs.bin
python ~/.platformio/packages/tool-esptoolpy/esptool.py --chip esp8266 --port /dev/cu.SLAB_USBtoUART --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size 4MB 0xd000 ota_data_initial.bin 0x0000 bootloader.bin 0x10000 e12aio3.bin 0x8000 partitions.bin

FAQ

Configure Home Assistant Auto Discovery

You need to add a few configurations to your home assistant existing MQTT configuration.

  1. discovery: true to enable auto-discovery via MQTT;
  2. discovery_prefix: where the boards will send the messages for config;

Sample:

mqtt:
    broker: 127.0.0.1
    port: 1883
    client_id: homeassistant
    keepalive: 300
    username: !secret mqtt_username
    password: !secret mqtt_password
    protocol: 3.1
    discovery: true
    discovery_prefix: home

home is your baseTopic.

MQTT Topics

Topics for command your relays, where payloads is ON or OFF:

<baseTopic>/switch/e12aio3_<id>/relay1/set
<baseTopic>/switch/e12aio3_<id>/relay2/set
<baseTopic>/switch/e12aio3_<id>/relay3/set

State topics for your relays:

<baseTopic>/switch/e12aio3_<id>/relay1
<baseTopic>/switch/e12aio3_<id>/relay2
<baseTopic>/switch/e12aio3_<id>/relay3

Sensor topics:

<baseTopic>/sensor/e12aio3_<id>/uptime
<baseTopic>/sensor/e12aio3_<id>/model
<baseTopic>/sensor/e12aio3_<id>/build
<baseTopic>/sensor/e12aio3_<id>/ipaddr
<baseTopic>/sensor/e12aio3_<id>/freemem

Action topics:

  • GET: command to get informations
  • SET: command to set action
  • RES: the topic where you will receive the result from GET
GET: <baseTopic>/action/e12aio3_<id>/config/get, PAYLOAD: json
SET: <baseTopic>/action/e12aio3_<id>/config/set, PAYLOAD: { .... json bellow .... }
RES: <baseTopic>/action/e12aio3_<id>/config, PAYLOAD: { ... json bellow... }

In version 2.2.x this functionallity (config/get or config/set) are disabled.

SET: <baseTopic>/action/e12aio3_<id>/restart/set, PAYLOAD: yes
GET: <baseTopic>/action/e12aio3_<id>/scan/get, PAYLOAD: json
RES: <baseTopic>/action/e12aio3_<id>/scan, PAYLOAD: { ... json under development ... }

How to build this firmware?

This firmware was built in ESP8266-RTOS IDF Like.

You can use a ESP8266 Programmer (and avoid to solder serial headers) or via serial (TX, RX, GND). Because you update the firmware via OTA πŸ™.

If you have a FTDI / CP2104 or CH340 with DTR and CTS, the board is flash friendly (auto enter in programmer mode and restart after each step for flashing).

How to configure default values from firmware?

Use make menuconfig

How to flash?

Use make erase_flash upload_spiffs flash

Can I host OTA Server Locally?

Yes. You can use the project inside ota folder to do that. You need generate certificates (self-signed) first, using ota/certs/generate.sh <ip>

Important: You must specify the IP address. Because you need to use the same IP in upload to check SSL certificate. If you have any doubt about that, please let us know.

Why HTMLs and others are packaged?

The process to build the spiffs.bin it's a little complex to explain. We use a lot of files, and GULP to post-process all of then. To help you understand, GULP do:

  1. generate a dynamic icon font, using only the SVGs is used;
  2. merge all css files in a unique file;
  3. minify htmls, css and images;
  4. re-structure folders from a organized tree to dist tree;

All spare files (to build the spiffs.bin) use much more than 1.5mb, and it is compressed in less than 150kb. This technology is part of a private repository. But if you really want to contribute, please let me know.

To develop that part of software in a more easy way, we created a httpd server, what provide to the browser, all files in an exactly same way of ESP8266. This httpd watch file changes in a directory and trigger gulp when something is changed.

Action Topics

It is a special kind of topic for you send (or ask for something) and you take an answer.

JSON Example

{
    "wifi": {
        "ssid": "myNetwork",
        "password": "mySecret"
    },
    "mqtt": {
        "url": "mqtt://user:password@host:port",
        "topic": "home/"
    },
    "relay": [0, 0, 0]
}