Skip to content

nysthi_v0_6_39 ELSKER + EXPIRED TIME + P2V + GRAN TUNISMO + feature requests and debugging
Compare
Choose a tag to compare
@nysthi nysthi released this 26 Jan 18:52
· 28 commits to master since this release
v0.6.39
29f453a
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

-- ELSKER (the MULTITRIGDELAYER)

---- it's a 12 trig/gate delay
---- with a common global TRIG, or single TRIG
---- parameters
---- GLOBAL TRIG/TAP to activate all the ACTIVE delayers at the same time
---- single delayer
---- TRIG/TAP to start the delay
---- ACTIVATE TAP/TRIG to ACTIVATE/DEACTIVATE the delayer
---- DELAY draggable display: from 1 msec to 999 seconds: time to wait
---- DURATION draggable display: from 1 msec to 999 seconds: length of delayed gate
(gate ON is 10 Volts)
---- GATE out is the GATE trig out the yellow LED will indicate current VOLTAGE status

-- EXPIRED TIME

---- IT's a BIG screen ELAPSED time TIMER, to check the monitor
screen shot 2019-01-26 at 19 19 13
far away
---- timer counts: Hours, minutes, seconds and msecs
---- parameters
---- START-CONTINUE TRIG/TAP, the TRIG/TAP is output also as PULSE OUT to sync more devices
---- RESET TRIG/TAP, the TRIG/TAP is output also as PULSE OUT to sync more devices
will reset the timer to 0
---- ALARMs section:
---- there are 3 alarms with Settable Hours Min and Sec. The ALARM will output a PULSE out when the timer HIT that TIME

-- P2V

---- an attempt for a more dedicated Pitch to Voltage module
---- (the same used in HotTuna, but tuned more for Real Time action)
---- the voltage detected is transformed with base C4 (261.63HZ) --> 0.0 Volts
---- parameters
---- Signal IN (the signal to processed) SIGNAL OUT (to chain out the processed signal)
---- Voltage out section:
---- VOLTAGE OCTAVE OFFSET, from -4 to +4 octaves
---- VOLTAGE SEMITONE OFFSET, from -11 to +11 semitones
---- VOLTAGE FINE OFFSET, a single semitone movement
---- VOLTAGE SMOOTHING to smooth the voltage out
---- VOLTAGE OUT, the detected VOLTAGE

-- GRAN TUNISMO

---- having had requests for a big display tuner
---- it's like HOTTUNA, but with less features, more precise
---- big screen for people needing to work far from screen
---- red glowing means wrong detections

-- BIGNUMBER

---- feature request: added a contextual menu "PULSE IN DECREMENT MODE" (on - off)
---- now can go in DECREMENT mode

-- HOT TUNA

---- added a "bobin" filter to the needle (more smooth)

-- BIVIO

---- feature request
---- added a contextual menu to choose if the UNSELECTED output (for BIVIO1 and BIVIO2)
should output LAST VOLTAGE (kind of sample & hold), or 0 VOLTAGE

-- TIMEX

---- improved PULSEs: They are now on the edge
---- PULSEs for 10thOSec, sec, min, hour and day, will happen exactly when the counter reset

-- MONORECORDER, MASTER RECORDER 2, MULTITRACK RECORDER

---- feature request
---- added the concept of chosen ARMED file
---- using the contextual menu is possible to choose a POTENTIAL destination file that
will be used next recording time.
---- the ARMED file is valid ONLY for one recording
---- beware that the AUTOSAVE win always... (if active)

Assets 5