This extension brings in configuration and usage of the MSYS2, Cygwin, MinGW and Clang toolchains to the Visual Studio Code and its OSS builds like VSCodium.
Technically the extension provides a set of commands for use with the ${command:...} substitution feature used throughout the VS Code and its extensions to enhance their configurability. These commands return full paths to the respective toolchain-specific executables such as the CMake itself, generators, compilers etc.
-
CMakeTools integration
- 32/64-bit MSYS2/Cygwin/MinGW/Clang toolchain configurations
-
CppTools integration
-
Cross-language debugging with GDB
-
-
Isolated operation where no global PATH modification is neccessary
-
Support for MSVCRT-based and UCRT-based MinGW toolchains provided by MSYS2
This extension is primarily designed to work with the CMakeTools extension although it is possible to make use of it with any build system which utilizes the command substitution capability.
The following steps are to be performed in order to configure a minimal usable MSYS2, Cygwin, MinGW/Clang and Visual Studio Code environments.
Hint the VS Code canonic Ctrl+Shift+P command palette shortcut extensively used below has a very convenient F1 alias.
The following extensions are to be installed
ms-vscode.cmake-tools ms-vscode.cpptools fougas.msys2
by opening the Visual Studio Code extensions panel with the Ctrl+Shift+X keyboard shortcut and pasting the above line into the entry, then installing each of highlighted extensions individually.
Next come optional yet recommended extensions which enhance the usage experience
twxs.cmake krvajalm.linter-gfortran
which provide the CMake and Fortran file syntax highlighting, respectively.
Unfortunately there are not all extensions available from alternative OpenVSX extension repository used by OSS builds of Visual Studio Code such as VSCoduim. This specifically means no out-of-the-box launch/debugging support. The avaliable extensions are installed as follows:
The following extensions are to be installed
ms-vscode.cmake-tools twxs.cmake fougas.msys2
by opening the Visual Studio Code extensions panel with the Ctrl+Shift+X keyboard shortcut and pasting the above line into the entry, then installing each of highlighted extensions individually.
Currently the MSYS2 extension provides no means of auto-detecting the supported toolchain locations.
Instead, it is configured manually via the per user configuration settings specified in the settings.json configuration file.
These settings can be set either via the UI or by direct editing the settings.json file in the form of raw JSON data.
In either case, the settings are accessible via the Ctrl+, keyboard shortcut.
The (64-bit only) MSYS2 location is specified by the msys2.root configuration setting in the settings.json file which is set to c:\msys64 by default as it is the default location proposed by the MSYS2 installer. This specifically means that no manual configuration is required when MSYS2 is installed into default location.
The 32/64-bit Cygwin locations are specified by the cygwin32.root and cygwin64.root configuration settings in the settings.json file which are set to c:\cygwin and c:\cygwin64 by default, respectively, as they are the default locations proposed by the Cygwin installers. This specifically means that no manual configuration is required when Cygwins are installed into default locations
The 32/64-bit MinGW locations are specified by the respective mingw32.root and mingw64.root configuration settings. If not set, their values will be computed according to the msys2.root value, hence there is no need to coupe with them in order to use the MSYS2-provided MinGW installations.
Note that in order to use the Cygwin-provided MinGW toolchains the mingw??.root configuration settings are to be set manually.
The MSYS2 extension offers selection of the source the MinGW toolchain comes from.
There are three implemented MinGW providers:
-
MSYS2
-
Cygwin
-
Standalone MinGW
The MinGW selection logics works as follows.
If the mingw??.root configuration setting is set, it is used to determine the root path to the standalone MinGW installation such as MinGW-W64 or TDM-GCC.
Otherwise, the mingw??.provider configuration setting is used to determine the MinGW provider. There are four possible values for it: msys2, cygwin32, cygwin64 and anything else with msys2 taken as the default. If it is set to anything but the first three, the selector falls back to the above mingw??.root case.
32/64-bit MinGW installations are determined separately with the respective configuration settings.
There are currently two different C runtimes supported by the MinGW: the traditional MSVCRT-based runtime and the Microsoft's new universal C runtime.
Modern MSYS2 provides support for both of them. Moreover, both versions do happily coexist within the MSYS2 installation inside {msys2.root}/mingw?? and {msys2.root}/ucrt64 directories, respectively.
This MSYS2 extension allows to select particular MinGW kit for use by the CMakeTools: the MSVCRT-based builds are accessible via the MinGW32 and MinGW64 kits and the 64-bit UCRT-based build is accessible via the UCRT64 kit (note that there is no 32-bit UCRT).
As the UCRT-based build is bound to the MSYS2 installation there is no particular configuration for it.
The MSYS2 extension provides support for the MSYS2-based 32/64-bit Clang toolchains in the same way as for the UCRT. As such, there is no configuration needed aside from installing the Clang toolchain itself which is expected to reside in the {msys2.root}/clang?? directories. After that, the Clang toolchains are accessible via the Clang32 and Clang64 kits within the CMakeTools.
The CMakeTools-specific configuration is normally done per user by editing the settings.json file either manually or through the VS Code's UI. There are two parts which are to be configured: the CMake itself and the CMake's generator tool. While it is sufficient to set the cmake.cmakePath configuration setting for the CMake part, the latter is a more involved. Of all CMake-supported generators there are two useful ones: GNU Make Makefile and Ninja generators with the latter being strongly recommended.
Note that any changes to the generator settings will most likely require reloading the VS Code window and project reconfiguration afterwards (see the Troubleshooting section below).
Even though the Ninja is a recommended generator, the Makefile generator is a default one (for a reason). While perfectly useful, the Makefile generator suffers from the naming problem which hinders the configuration's platform independence: there are different Makefile generators for different environments. Specifically, the MSYS2's generator is named MSYS Makefiles, the MinGW's is named MinGW Makefiles while Cygwin and WSL share the same Unix Makefiles generator with all three producing incompatible Makefiles.
To overcome this problem the MSYS2 extension's configuration relies on default generator selection mechanism implemented in the CMakeTools. For this to work, the cmake.generator configuration setting must be unset as shown in the following settings.json configuration file.
{
"cmake.cmakePath": "${command:cmake.buildkit.cmake.exe}",
"cmake.preferredGenerators": ["Unix Makefiles"],
"cmake.configureSettings": {
"CMAKE_MAKE_PROGRAM": "${command:cmake.buildkit.generator.exe}",
"CMAKE_VERBOSE_MAKEFILE": false
}
}This configuration is expected to work unchanged across all supported environments: native Windows (MinGW), unixized Windows (MSYS2, Cygwin) and managed Linux (WSL, WSL2).
The Ninja generator configuration is an extension to the Makefile generator's with the explicit cmake.generator setting being the only addition:
{
"cmake.generator": "Ninja",
"cmake.cmakePath": "${command:cmake.buildkit.cmake.exe}",
"cmake.preferredGenerators": ["Unix Makefiles"],
"cmake.configureSettings": {
"CMAKE_MAKE_PROGRAM": "${command:cmake.buildkit.generator.exe}",
"CMAKE_VERBOSE_MAKEFILE": false
}
}This way the hop between Makefile and Ninja is just a cmake.generator configuration setting away.
This is the most comfortable generator to use with CMake as it accounts for the fast switching between different build types (Debug/Release, for example) with no project reconfiguration & recompilation.
{
"cmake.generator": "Ninja Multi-Config",
"cmake.cmakePath": "${command:cmake.buildkit.cmake.exe}",
"cmake.preferredGenerators": ["Unix Makefiles"],
"cmake.configureSettings": {
"CMAKE_MAKE_PROGRAM": "${command:cmake.buildkit.generator.exe}",
"CMAKE_VERBOSE_MAKEFILE": false
}
}There is a problem with this generator, though: the default virtual Linux distribution for WSL2 is Ubuntu 20.04 which ships the CMake version 3.16 whereas the CMake's Ninja Multi-Config generator is implemented in the CMake version 3.17. As a result, the above configuration will not currently work on stock WSL2's virtual Linux (but might work on custom Linuxes, such as openSUSE Leap).
Anyway, the switching between Ninja and Multi-Config Ninja is as simple as changing the cmake.generator configuration setting.
In order to configure per user MSYS2-specific CMakeTools' CMake Kits, issue the command Ctrl+Shift+P |> CMake: Edit User-Local CMake Kits and paste the configuration below
[
{
"name": "MinGW32",
"preferredGenerator": {"name": "MinGW Makefiles"},
"environmentVariables": {"PATH": "${command:mingw32.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:mingw32.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:mingw32.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:mingw32.fc.exe}",
"MPI_C_COMPILER": "${command:mingw32.mpicc.exe}",
"MPI_CXX_COMPILER": "${command:mingw32.mpicxx.exe}",
"MPI_Fortran_COMPILER": "${command:mingw32.mpifort.exe}"
},
"keep": true
},
{
"name": "MinGW64",
"preferredGenerator": {"name": "MinGW Makefiles"},
"environmentVariables": {"PATH": "${command:mingw64.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:mingw64.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:mingw64.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:mingw64.fc.exe}",
"MPI_C_COMPILER": "${command:mingw64.mpicc.exe}",
"MPI_CXX_COMPILER": "${command:mingw64.mpicxx.exe}",
"MPI_Fortran_COMPILER": "${command:mingw64.mpifort.exe}"
},
"keep": true
},
{
"name": "UCRT64",
"preferredGenerator": {"name": "MinGW Makefiles"},
"environmentVariables": {"PATH": "${command:ucrt64.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:ucrt64.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:ucrt64.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:ucrt64.fc.exe}",
"MPI_C_COMPILER": "${command:ucrt64.mpicc.exe}",
"MPI_CXX_COMPILER": "${command:ucrt64.mpicxx.exe}",
"MPI_Fortran_COMPILER": "${command:ucrt64.mpifort.exe}"
},
"keep": true
},
{
"name": "Clang32",
"preferredGenerator": {"name": "MinGW Makefiles"},
"environmentVariables": {"PATH": "${command:clang32.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:clang32.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:clang32.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:clang32.fc.exe}",
"MPI_C_COMPILER": "${command:clang32.mpicc.exe}",
"MPI_CXX_COMPILER": "${command:clang32.mpicxx.exe}",
"MPI_Fortran_COMPILER": "${command:clang32.mpifort.exe}"
},
"keep": true
},
{
"name": "Clang64",
"preferredGenerator": {"name": "MinGW Makefiles"},
"environmentVariables": {"PATH": "${command:clang64.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:clang64.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:clang64.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:clang64.fc.exe}",
"MPI_C_COMPILER": "${command:clang64.mpicc.exe}",
"MPI_CXX_COMPILER": "${command:clang64.mpicxx.exe}",
"MPI_Fortran_COMPILER": "${command:clang64.mpifort.exe}"
},
"keep": true
},
{
"name": "MSYS2",
"preferredGenerator": {"name": "Unix Makefiles"},
"environmentVariables": {"PATH": "${command:msys2.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:msys2.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:msys2.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:msys2.fc.exe}",
},
"keep": true
},
{
"name": "Cygwin32",
"preferredGenerator": {"name": "Unix Makefiles"},
"environmentVariables": {"PATH": "${command:cygwin32.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:cygwin32.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:cygwin32.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:cygwin32.fc.exe}",
},
"keep": true
},
{
"name": "Cygwin64",
"preferredGenerator": {"name": "Unix Makefiles"},
"environmentVariables": {"PATH": "${command:cygwin64.path}"},
"cmakeSettings": {
"CMAKE_C_COMPILER": "${command:cygwin64.cc.exe}",
"CMAKE_CXX_COMPILER": "${command:cygwin64.cxx.exe}",
"CMAKE_Fortran_COMPILER": "${command:cygwin64.fc.exe}",
},
"keep": true
}
]Note that the above configuration command is only available when the CMakeTools extension is active, e.g. when a CMake project is open.
Note that the CppTools extension is currently available at Visual Studio Marketplace only meaning no out-of-the-box support for alternative VS Code builds such as VSCodium.
In order to configure the per project configuration in .vscode/launch.json file which plays nicely with the CppTools debugging funcionality, issue the command Ctrl+Shift+P |> Open launch.json and paste the configuration below
{
"version": "0.2.0",
"configurations": [
{
"name": "(gdb) Launch",
"type": "cppdbg",
"request": "launch",
"program": "${command:cmake.launchTargetPath}",
"args": [],
"stopAtEntry": false,
"cwd": "${workspaceFolder}",
"environment": [
{
"name": "PATH",
"value": "${command:cmake.buildkit.launch.path}"
}
],
"externalConsole": true,
"MIMode": "gdb",
"miDebuggerPath": "${command:cmake.buildkit.gdb.exe}",
"setupCommands": [
{
"description": "Enable pretty-printing for gdb",
"text": "-enable-pretty-printing",
"ignoreFailures": true
}
]
}
]
}This configuration employs the GDB debugger specific to the CMake build kit currently in effect. Also, it sets up the PATH environment variable to include both executable directory and toolchain binary directory for launcher to reach all the required dynamic libraries.
The configuration is expected to work in both MSYS2 and Linux environments with no modifications.
In order to enable the IntelliSense support which provides the code navigation capability the following per project configuration is to be put into the .vscode/c_cpp_properties.json file either manually or by issuing the command Ctrl+Shift+P |> C/C++: Edit Configurations (JSON) and paste the configuration below
{
"configurations": [
{
"name": "Win32",
"includePath": [
"${workspaceFolder}/**"
],
"defines": [
"_DEBUG",
"UNICODE",
"_UNICODE"
],
"cStandard": "c99",
"cppStandard": "c++11",
"intelliSenseMode": "windows-gcc-x64",
"compileCommands": "${workspaceFolder}/build/compile_commands.json",
"configurationProvider": "ms-vscode.cmake-tools"
},
{
"name": "Linux",
"includePath": [
"${workspaceFolder}/**"
],
"defines": [],
"cStandard": "c99",
"cppStandard": "c++11",
"intelliSenseMode": "linux-gcc-x64",
"compileCommands": "${workspaceFolder}/build/compile_commands.json",
"configurationProvider": "ms-vscode.cmake-tools"
}
],
"version": 4
}This configuration is set up to work with the CMakeTools extension which provides the toolchain in effect.
The includePath, defines, *Standard, intelliSenseMode properties are likely to be tailoerd to meet the specific needs, though the default values can be used as a starting point.
Staring with version 0.10.0 the extension has built-in support for MPI detection & compilation for relevant toolchains.
Currently the only supported MPI provider is Microsoft MPI (aka MS-MPI).
While Cygwin has OpenMPI support it's not (yet) covered by this extension.
As a result, the only MPI-capable toolchains so far are MinGW*, UCRT* and Clang*.
Note that the MS-MPI is fully supported by the Visual Studio & Windows-native CMake which allows for MPI code compilation from within Visual Studio Code as well.
In order to compile & run MPI codes both runtime and SDK packages are required to be installed. The runtime package which can be obtained from the aforementioned location is required by all relevant toolchains (Visual Studio included). As for SDK, Visual Studio consumes the official SDK package which is obtaned along with the runtime. On the contrary, the MSYS2-based toolchains require toolchain-specific msmpi packages which should be installed manually with Pacman.
Please note that the CMakeTools configuration above is extended to accomodate new functionality. As a consequence, the per user CMake Kits configuration must be revised.
The MSYS2 is a very simple extension which should work well out of the box and 90% of the problems can be resolved by making two simple steps:
-
Reload the VS Code window with
Ctrl+Shift+P|> Developer: Reload Window -
Reconfigure the CMake project with with
Ctrl+Shift+P|> CMake: Delete Cache and Reconfigure
[0.10.0] It was noted that the CMakeTools toolchain scanner clobbers existing entries handled by MSYS2 extension. To overcome this issue the CMake Kits JSON configuration has been updated.
[0.9.1] No out-of-the-box CppTools integration for VSCodium & friends. Some optional extensions are also missing.
[0.9.0] The extension's Clang configuration provides support for the FORTRAN language but the MSYS2 project is yet to roll out the Flang compiler.
[0.2.0] When switching between the CMakeTools build kits within a single work session, the CMake cmake.cmakePath property is not re-evaluated even in spite of the requested command interpolation (${command:cmake.buildkit.cmake.exe}, for example). As a result, a previous kit's value will be reused. In order to synchronize its value, a session restart is required. On the contrary, a generator tool specified by the cmake.configureSettings property gets updated correctly.
[0.1.0] The integrated terminal terminal.integrated.shell.windows setting so far does not actually perform command substitution effectively precluding the use of the package-provided msys2.bash.exe command to obtain the actual path to Bash executable.