Not able to login to dlux and api explorer UI

[subh007]

After the installation of bundles I tried to login to dlux ui but it is trowing ERROR 401.

[mknair75]

Hope you have installed feature-dlux-all and feature-restconf-all

[subh007]

yes, I did.

[mknair75]

Following is the order in which I installed the features after installing odl-l2switch-all, odl-didm-all and odl-atrium-all . I was able to successfully connect to dlux UI and apidocs page.

feature:install odl-restconf odl-l2switch-switch odl-mdsal-apidocs odl-dlux-core

This is as suggested in the ODL dlux wiki page here
https://wiki.opendaylight.org/view/OpenDaylight_DLUX:DLUX_Karaf_Feature

[subh007]

Hello Manoj,

Thanks for the help. The issue happened because of vm configuration. VM was running with 1 cpu, that I have increased and then I am able to see the proper flows.

But the hosts are still not pinging. I am working on it.

[subh007]

Hello Manoj,

I'm seeing that the group entries are not getting installed.
Could you please confirm that in your setup, whether the group entries are getting installed.

Following is the output of DUT:

admin@atrium:~$ sudo ovs-ofctl dump-flows router -O OpenFlow13 table=1
OFPST_FLOW reply (OF1.3) (xid=0x2):
 cookie=0x0, duration=1034.265s, table=1, n_packets=20, n_bytes=1964, priority=180,ip,nw_dst=1.0.0.0/16 actions=write_actions(group:1)
 cookie=0x0, duration=1034.246s, table=1, n_packets=6, n_bytes=592, priority=180,ip,nw_dst=2.0.0.0/16 actions=write_actions(group:2)

admin@atrium:~$ sudo ovs-ofctl dump-groups router -O OpenFlow13
OFPST_GROUP_DESC reply (OF1.3) (xid=0x2):

admin@atrium:~$

[mknair75]

Hi Subhash,

Following is the output we see for dump-groups

admin@atrium:$ sudo ovs-ofctl dump-groups router -O OpenFlow13
OFPST_GROUP_DESC reply (OF1.3) (xid=0x2):
group_id=1,type=indirect,bucket=weight:0,actions=set_field:00:00:00:00:10:01->eth_dst,set_field:00:00:00:00:00:01->eth_src,push_vlan:0x8100,set_field:4196->vlan_vid,output:1
group_id=2,type=indirect,bucket=weight:0,actions=set_field:00:00:00:00:20:01->eth_dst,set_field:00:00:00:00:00:02->eth_src,push_vlan:0x8100,set_field:4296->vlan_vid,output:2
admin@atrium:$

Regards

Manoj

---

From: Subhash Kumar Singh notifications@github.com
Sent: Tuesday, November 24, 2015 2:29 PM
To: OpenNetworkingFoundation/ATRIUM
Cc: Manoj K Nair (WT01 - Global Media & Telecom)
Subject: Re: [ATRIUM] Not able to login to dlux and api explorer UI (#5)

Hello Manoj,

I'm seeing that the group entries are not getting installed.
Could you please confirm that in your setup the group entries are getting installed.

Following is the output of DUT:

admin@atrium:~$ sudo ovs-ofctl dump-flows router -O OpenFlow13 table=1
OFPST_FLOW reply (OF1.3) (xid=0x2):
cookie=0x0, duration=1034.265s, table=1, n_packets=20, n_bytes=1964, priority=180,ip,nw_dst=1.0.0.0/16 actions=write_actions(group:1)
cookie=0x0, duration=1034.246s, table=1, n_packets=6, n_bytes=592, priority=180,ip,nw_dst=2.0.0.0/16 actions=write_actions(group:2)

admin@atrium:~$ sudo ovs-ofctl dump-groups router -O OpenFlow13
OFPST_GROUP_DESC reply (OF1.3) (xid=0x2):

admin@atrium:~$

Reply to this email directly or view it on GitHubhttps://github.com//issues/5#issuecomment-159199872.

[https://avatars2.githubusercontent.com/u/2042859?v=3&s=400]#5 (comment)

Not able to login to dlux and api explorer UI · Issue #5 · OpenNetworkingFoundation/ATRIUM
After the installation of bundles I tried to login to dlux ui but it is trowing ERROR 401.
Read more...#5 (comment)

The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

[subh007]

Hello Manoj,

I recompiled the code and now I am able to see the group entries:

> sh ovs-ofctl dump-groups router -O OpenFlow13
OFPST_GROUP_DESC reply (OF1.3) (xid=0x2):
 group_id=1,type=indirect,bucket=weight:0,actions=set_field:00:00:00:00:10:01->eth_dst,set_field:00:00:00:00:00:01->eth_src,push_vlan:0x8100,set_field:4196->vlan_vid,output:1
 group_id=2,type=indirect,bucket=weight:0,actions=set_field:00:00:00:00:20:01->eth_dst,set_field:00:00:00:00:00:02->eth_src,push_vlan:0x8100,set_field:4296->vlan_vid,output:2

and hosts are pinging now.

mininet> host1 ping host2
*** errRun: ['stty', '-icanon', 'min', '1']
  0PING 2.0.0.1 (2.0.0.1) 56(84) bytes of data.
64 bytes from 2.0.0.1: icmp_req=1 ttl=62 time=2.70 ms
64 bytes from 2.0.0.1: icmp_req=2 ttl=62 time=0.866 ms
64 bytes from 2.0.0.1: icmp_req=3 ttl=62 time=1.37 ms
^CsendInt: writing chr(3)

--- 2.0.0.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2008ms
rtt min/avg/max/mdev = 0.866/1.648/2.706/0.776 ms

mininet> host2 ping host1
*** errRun: ['stty', '-icanon', 'min', '1']
  0PING 1.0.0.1 (1.0.0.1) 56(84) bytes of data.
64 bytes from 1.0.0.1: icmp_req=1 ttl=62 time=2.54 ms
64 bytes from 1.0.0.1: icmp_req=2 ttl=62 time=0.619 ms

We can close these issue.

[mknair75]

Closing this issue. Subhash is able to launch UI.