Slave SBE scratch regs must be up to date before continueMPIPL called

There was a hole in the MPIPL path where we were not updating the
slave SBE scratch registers prior to rebooting them with the
continueMPIPL chip op. Without this we ran the risk of not having
correct information in the registers when the slave sbe restarted.

Change-Id: Ib666388ef8773cd16c3f403fa83750da3e551c55
Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/59070
Tested-by: Jenkins Server <pfd-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP Build CI <op-jenkins+hostboot@us.ibm.com>
Tested-by: Jenkins OP HW <op-hw-jenkins+hostboot@us.ibm.com>
Reviewed-by: Daniel M. Crowell <dcrowell@us.ibm.com>

src/usr/isteps/istep06/host_discover_targets.C

@@ -61,6 +61,7 @@
 #include    <sys/misc.h>
 
 #include <p9_query_core_access_state.H>
+#include <p9_setup_sbe_config.H>
 #include <p9_query_cache_access_state.H>
 #include <p9_hcd_core_stopclocks.H>
 #include <p9_hcd_cache_stopclocks.H>
@@ -207,8 +208,46 @@ errlHndl_t sendContinueMpiplChipOp()
             }
         }
     }
+    return l_err;
+}
+
+/**
+*  @brief  Walk through list of PROC chip targets and run p9_setup_sbe_config
+*          HWP on all of the slave PROC chips to ensure scratch regs are updated
+*
+*  @return     errlHndl_t
+*/
+errlHndl_t updateSlaveSbeScratchRegs()
+{
+    errlHndl_t l_err = nullptr;
+
+    TARGETING::TargetHandleList l_procChips;
+    TARGETING::getAllChips(l_procChips, TARGETING::TYPE_PROC, true);
+    TARGETING::PROC_SBE_MASTER_CHIP_ATTR l_is_master_chip = 1;
+
+    for(const auto & l_chip : l_procChips)
+    {
+        l_is_master_chip = l_chip->getAttr<TARGETING::ATTR_PROC_SBE_MASTER_CHIP>();
+        if(!l_is_master_chip)
+        {
+            fapi2::Target <fapi2::TARGET_TYPE_PROC_CHIP> l_fapi_proc_target (l_chip);
+            // Run the setup_sbe_config hwp on all of the slave procs to make sure
+            // the scratch registers are up to date prior to sending the continueMPIPL
+            // operation
+            FAPI_INVOKE_HWP(l_err,
+                            p9_setup_sbe_config,
+                            l_fapi_proc_target);
 
-return l_err;
+            if(l_err)
+            {
+                TRACFCOMP(ISTEPS_TRACE::g_trac_isteps_trace,
+                          "Failed during updateSlaveSbeScratchRegs request on this proc = %x",
+                          l_chip->getAttr<TARGETING::ATTR_HUID>());
+                break;
+            }
+        }
+    }
+    return l_err;
 }
 
 
@@ -444,14 +483,22 @@ void* host_discover_targets( void *io_pArgs )
                   "when the targeting service started");
         do
         {
-            //Need to power down the slave quads
+            // Need to power down the slave quads
             l_err = powerDownSlaveQuads();
             if (l_err)
             {
                 break;
             }
 
-            //Send continue mpipl op to slave procs
+            // Need to ensure slave SBE's scratch registers are
+            // up to date prior to sending continueMPIPL op
+            l_err = updateSlaveSbeScratchRegs();
+            if (l_err)
+            {
+                break;
+            }
+
+            // Send continue mpipl op to slave procs
             l_err = sendContinueMpiplChipOp();
             if (l_err)
             {

src/usr/isteps/istep06/makefile

@@ -5,7 +5,7 @@
 #
 # OpenPOWER HostBoot Project
 #
-# Contributors Listed Below - COPYRIGHT 2015,2017
+# Contributors Listed Below - COPYRIGHT 2015,2018
 # [+] International Business Machines Corp.
 #
 #
@@ -36,13 +36,15 @@ OBJS += call_host_voltage_config.o
 
 SUBDIRS	+= thread_activate.d
 
+PERV_HWP_PATH += ${ROOTPATH}/src/import/chips/p9/procedures/hwp/perv
 NEST_HWP_PATH += ${ROOTPATH}/src/import/chips/p9/procedures/hwp/nest
 PM_HWP_PATH   += ${ROOTPATH}/src/import/chips/p9/procedures/hwp/pm
 CORE_HWP_PATH += ${ROOTPATH}/src/import/chips/p9/procedures/hwp/core
 CACHE_HWP_PATH += ${ROOTPATH}/src/import/chips/p9/procedures/hwp/cache
 LIB_HWP_PATH  += ${ROOTPATH}/src/import/chips/p9/procedures/hwp/lib
 
 VPATH += ${NEST_HWP_PATH}
+VPATH += ${PERV_HWP_PATH}
 VPATH += ${PM_HWP_PATH}
 VPATH += ${LIB_HWP_PATH}
 VPATH += ${CORE_HWP_PATH}
@@ -54,6 +56,7 @@ EXTRAINCDIR += ${ROOTPATH}/src/include/usr/fapi2
 EXTRAINCDIR += ${ROOTPATH}/src/include/usr/secureboot
 EXTRAINCDIR += ${ROOTPATH}/src/import/chips/p9/common/include
 EXTRAINCDIR += ${NEST_HWP_PATH}
+EXTRAINCDIR += ${PERV_HWP_PATH}
 EXTRAINCDIR += ${ROOTPATH}/src/import/chips/p9/utils
 EXTRAINCDIR += ${ROOTPATH}/src/import/chips/p9/utils/imageProcs/
 EXTRAINCDIR += ${ROOTPATH}/src/import/chips/common/utils/imageProcs/
@@ -74,6 +77,7 @@ include $(NEST_HWP_PATH)/p9_revert_sbe_mcs_setup.mk
 # Take another look at PM lib
 include $(PM_HWP_PATH)/p9_pm_utils.mk
 
+include $(PERV_HWP_PATH)/p9_setup_sbe_config.mk
 include $(PM_HWP_PATH)/p9_query_core_access_state.mk
 include $(PM_HWP_PATH)/p9_query_cache_access_state.mk
 include $(PM_HWP_PATH)/p9_quad_power_off.mk