Update configs

README.md

@@ -183,7 +183,7 @@ Xiaomi | Redmi 7A / 8 / 8A / 8A Dual | [Mi439](https://wiki.lineageos.org/device
 Xiaomi | Redmi Note 8 / 8T | [ginkgo](https://wiki.lineageos.org/devices/ginkgo) / willow |  | untested
 Xiaomi | Redmi Note 8 Pro | begonia |  | untested
 Xiaomi | Redmi 9A / 9C / 9AT / 9i / 9A Sport / 10A / 10A Sport | garden / dandelion / blossom / angelican | | tested
-Xiaomi | Mi 9T / Redmi K20 | [davinci](https://wiki.lineageos.org/devices/davinci) / davinciin |  | untested
+Xiaomi | Mi 9T / Redmi K20 | [davinci](https://wiki.lineageos.org/devices/davinci) / davincin |  | untested
 Xiaomi | Redmi K20 Pro / Mi 9T Pro | raphael / raphaelin | | untested
 Xiaomi | Redmi Note 9S / 9 Pro / 9 Pro Max / 10 Lite / Poco M2 pro | [miatoll](https://wiki.lineageos.org/devices/lavender) : gram / curtana / excalibur / joyeuse  |  | untested
 Xiaomi | Redmi Note 10S / 11SE / Poco M5S | [rosemary](https://wiki.lineageos.org/devices/rosemary) / maltose / secret /rosemary_p | | untested

openandroidinstaller/assets/configs/alioth.yaml

@@ -6,8 +6,7 @@ metadata:
   device_code: alioth
   untested: true
   additional_steps:
-    - vendor_boot
-    - boot
+    - vbmeta
   supported_device_codes:
     - alioth
     - aliothin

openandroidinstaller/assets/configs/begonia.yaml

@@ -48,7 +48,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/cupid.yaml

@@ -43,18 +43,12 @@ steps:
         
         Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
-    - type: call_button
-      content: >
-        Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected this partition, it will do nothing.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       content: >
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/davinci.yaml

@@ -44,7 +44,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/dre.yaml

@@ -40,12 +40,6 @@ steps:
       content: >
         Boot a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_boot_recovery
-    - type: call_button
-      content: >
-        Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected additional partitions it will do nothing and is save to continue.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.

openandroidinstaller/assets/configs/flame.yaml

@@ -50,12 +50,6 @@ steps:
     - type: confirm_button
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
-    - type: call_button
-      content: >
-        When you are in the bootloder, install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected additional partitions it will do nothing and is save to continue.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       img: twrp-start.jpeg
       content: >

openandroidinstaller/assets/configs/garden.yaml

@@ -49,7 +49,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/ginkgo.yaml

@@ -48,7 +48,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/guacamole.yaml

@@ -34,12 +34,6 @@ steps:
         adapting and repairing of the operating system.
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
-    - type: call_button
-      content: >
-        Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected additional partitions it will do nothing and is save to continue.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       img: twrp-start.jpeg
       content: >

openandroidinstaller/assets/configs/guacamoleb.yaml

@@ -34,12 +34,6 @@ steps:
         adapting and repairing of the operating system.
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
-    - type: call_button
-      content: >
-        Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected additional partitions it will do nothing and is save to continue.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       img: twrp-start.jpeg
       content: >

openandroidinstaller/assets/configs/hotdog.yaml

@@ -34,12 +34,6 @@ steps:
         adapting and repairing of the operating system.
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
-    - type: call_button
-      content: >
-        Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected additional partitions it will do nothing and is save to continue.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       img: twrp-start.jpeg
       content: >

openandroidinstaller/assets/configs/hotdogb.yaml

@@ -34,12 +34,6 @@ steps:
         adapting and repairing of the operating system.
         Make sure your device is turned on. You need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
-    - type: call_button
-      content: >
-        Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected additional partitions it will do nothing and is save to continue.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       img: twrp-start.jpeg
       content: >

openandroidinstaller/assets/configs/lavender.yaml

@@ -46,7 +46,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/miatoll.yaml

@@ -49,7 +49,7 @@ steps:
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/raphael.yaml

@@ -40,18 +40,12 @@ steps:
         
         Once the device is fully booted, you need to reboot into the bootloader again by pressing 'Confirm and run' here. Then continue.
       command: adb_reboot_bootloader
-    - type: call_button
-      content: >
-        Install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected this partition, it will do nothing.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       content: >
         Install the recovery you chosen before by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      img: ofox.png
+      img: twrp-start.jpeg
       content: >
         Reboot to recovery by pressing 'Confirm and run', and hold the Vol+ button of your phone UNTIL you see the recovery.
         If MiUI starts, you have to start the process again, since MiUI delete the recovery you just flashed.

openandroidinstaller/assets/configs/sunfish.yaml

@@ -50,12 +50,6 @@ steps:
     - type: confirm_button
       content: >
         Select 'Restart bootloader' on your smartphone screen. Then confirm to continue.
-    - type: call_button
-      content: >
-        When you are in the bootloder, install additional partitions selected before by pressing 'Confirm and run'. Once it's done continue.
-        
-        Note : If you have not selected additional partitions it will do nothing and is save to continue.
-      command: fastboot_flash_additional_partitions
     - type: call_button
       img: twrp-start.jpeg
       content: >