WIP - now detect a/b devices and pick different install paths; change…

… recovery commands for sony devices

openandroidinstaller/app_state.py

@@ -42,6 +42,7 @@ def __init__(
         self.config = None
         self.image_path = None
         self.recovery_path = None
+        self.is_ab = None
 
         # is this still needed?
         self.steps = None

openandroidinstaller/assets/configs/akari.yaml

@@ -42,21 +42,13 @@ steps:
       command: adb_reboot_bootloader
     - type: call_button
       content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
     - type: call_button
       command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-  install_os:
-    - type: call_button 
-      content: >
-        In the next steps, you finally flash the selected OS image.
-        Connect your device with your computer with the USB-Cable.
-        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
-        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
-      command: adb_twrp_wipe_and_install
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.

openandroidinstaller/assets/configs/akatsuki.yaml

@@ -42,21 +42,13 @@ steps:
       command: adb_reboot_bootloader
     - type: call_button
       content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
     - type: call_button
       command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-  install_os:
-    - type: call_button 
-      content: >
-        In the next steps, you finally flash the selected OS image.
-        Connect your device with your computer with the USB-Cable.
-        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
-        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
-      command: adb_twrp_wipe_and_install
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.

openandroidinstaller/assets/configs/kirin.yaml

@@ -40,21 +40,13 @@ steps:
       command: adb_reboot_bootloader
     - type: call_button
       content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
     - type: call_button
       command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-  install_os:
-    - type: call_button 
-      content: >
-        In the next steps, you finally flash the selected OS image.
-        Connect your device with your computer with the USB-Cable.
-        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
-        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
-      command: adb_twrp_wipe_and_install
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.

openandroidinstaller/assets/configs/mermaid.yaml

@@ -40,21 +40,13 @@ steps:
       command: adb_reboot_bootloader
     - type: call_button
       content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
     - type: call_button
       command: adb_twrp_copy_partitions
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
-      command: fastboot_flash_recovery
+      command: fastboot_flash_boot
       content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-  install_os:
-    - type: call_button 
-      content: >
-        In the next steps, you finally flash the selected OS image.
-        Connect your device with your computer with the USB-Cable.
-        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
-        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
-      command: adb_twrp_wipe_and_install
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.

openandroidinstaller/assets/configs/pioneer.yaml

@@ -44,19 +44,11 @@ steps:
       content: Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once it's done continue.
       command: fastboot_flash_recovery
     - type: call_button
-      command: adb_twrp_copy_partitions
+      command: adb_twrp_copy_boot
       content: >
         In some cases, the inactive slot can be unpopulated or contain much older firmware than the active slot, leading to various issues including a potential hard-brick.
         We can ensure none of that will happen by copying the contents of the active slot to the inactive slot. Press 'confirm and run' to to this. Once you are in the bootloader again, continue.
     - type: call_button
-      command: fastboot_flash_recovery
-      content: >
-        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.
-  install_os:
-    - type: call_button 
+      command: fastboot_flash_boot
       content: >
-        In the next steps, you finally flash the selected OS image.
-        Connect your device with your computer with the USB-Cable.
-        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
-        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
-      command: adb_twrp_wipe_and_install
+        Now we need to boot into recovery again. Press run and when you see the TWRP screen you can continue.

openandroidinstaller/assets/configs/yuga.yaml

@@ -37,12 +37,4 @@ steps:
       command: adb_reboot_bootloader
     - type: call_button
       content: Next, you need to flash a custom recovery image. Press the button to flash the selected image. Then continue.
-      command: fastboot_flash_recovery
-  install_os:
-    - type: call_button 
-      content: >
-        In the next steps, you finally flash the selected OS image.
-        Connect your device with your computer with the USB-Cable.
-        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
-        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
-      command: adb_twrp_wipe_and_install
+      command: fastboot_flash_boot

openandroidinstaller/assets/configs/z3.yaml

@@ -39,12 +39,4 @@ steps:
       command: adb_reboot_bootloader
     - type: call_button
       content: Next, you need to flash a custom recovery image. Press the button to flash the selected image. Then continue.
-      command: fastboot_flash_recovery
-  install_os:
-    - type: call_button 
-      content: >
-        In the next steps, you finally flash the selected OS image.
-        Connect your device with your computer with the USB-Cable.
-        This step will format your phone and wipe all the data. It will also remove encryption and delete all files stored 
-        in the internal storage. Then the OS image will be installed. Confirm to run. This might take a while. At the end your phone will boot into the new OS.
-      command: adb_twrp_wipe_and_install
+      command: fastboot_flash_boot

openandroidinstaller/installer_config.py

@@ -152,7 +152,7 @@ def validate_config(config: str) -> bool:
         ),
         "content": str,
         schema.Optional("command"): Regex(
-            r"adb_reboot|adb_reboot_bootloader|adb_reboot_download|adb_sideload|adb_twrp_wipe_and_install|adb_twrp_copy_partitions|fastboot_flash_recovery|fastboot_unlock_with_code|fastboot_get_unlock_data|fastboot_unlock|fastboot_oem_unlock|fastboot_reboot|heimdall_flash_recovery"
+            r"adb_reboot|adb_reboot_bootloader|adb_reboot_download|adb_sideload|adb_twrp_wipe_and_install|adb_twrp_copy_partitions|fastboot_flash_recovery|fastboot_flash_boot|fastboot_unlock_with_code|fastboot_get_unlock_data|fastboot_unlock|fastboot_oem_unlock|fastboot_reboot|heimdall_flash_recovery"
         ),
         schema.Optional("allow_skip"): bool,
         schema.Optional("img"): str,

openandroidinstaller/openandroidinstaller.py

@@ -124,23 +124,11 @@ def __init__(self, state: AppState):
 
         # initialize the addon view
         self.select_addon_view = AddonsView(on_confirm=self.to_next_view, state=self.state)
-        self.flash_recovery_view = StepView(
-            step=Step(
-                title="Flash custom recovery",
-                type="call_button",
-                content="Flash a custom recovery (temporarily) by pressing 'Confirm and run'. Once your phone screen looks like the picture on the left, continue.",
-                command="fastboot_flash_recovery",
-                img="twrp-start.jpeg",
-            ),
-            state=self.state,
-            on_confirm=self.to_next_view,
-        )
         self.install_addons_view = InstallAddonsView(
             on_confirm=self.to_next_view, state=self.state
         )
         self.state.addon_views = [
             self.install_addons_view,
-            self.flash_recovery_view,
             self.select_addon_view,
         ]