Merge pull request #1945 from psonnera/master

Drive G6 to external documents

docs/EN/Configuration/Config-Builder.md

@@ -59,7 +59,7 @@ Local profiles can also be uploaded to Nightscout. The settings can be found in
 ![Upload local profile to NS](../images/LocalProfile_UploadNS_AASP30.png)
 
 #### Change profile in Nighscout profile editor
-You can synchronoze changes to the profile in the Nighscout profile editor to local profiles. The settings can be found in [NSClient preferences](Preferences-nsclient).
+You can synchronize changes to the profile in the Nighscout profile editor to local profiles. The settings can be found in [NSClient preferences](Preferences-nsclient).
 
 It is necessary to clone the actual active entire Nightscout database records for the profiles and not just a profile with the blue arrow! The new database records then carries the current date and can be activated via the tab "local profile".
 
@@ -136,7 +136,7 @@ Details are explained on the separate [profile helper page](../Configuration/pro
 ## BG Source
 Select the blood glucose source you are using - see [BG Source](BG-Source.md) page for more setup information.
 
-![Config Builder BG source](../images/ConfBuild_BGSource_AAPS30.png)
+![Config Builder BG source](../images/ConfBuild_BG.png)
 
 * [Build Your Own Dexcom App (BYODA)](https://docs.google.com/forms/d/e/1FAIpQLScD76G0Y-BlL4tZljaFkjlwuqhT83QlFM5v6ZEfO7gCU98iJQ/viewform?fbzx=2196386787609383750&fbclid=IwAR2aL8Cps1s6W8apUVK-gOqgGpA-McMPJj9Y8emf_P0-_gAsmJs6QwAY-o0).
 * [xDrip+](https://xdrip-plus-updates.appspot.com/stable/xdrip-plus-latest.apk)

docs/EN/Hardware/DexcomG6.md

@@ -2,128 +2,65 @@
 
 ## Basics first
 
--   Follow general CGM hygiene and setting sensor recommendation
-    [here](../Hardware/GeneralCGMRecommendation.md).
--   For G6 transmitters manufactured after fall/end of 2018 please make
-    sure to use one of the [latest nightly built xDrip+
-    versions](https://github.com/NightscoutFoundation/xDrip/releases).
-    Those transmitters have a new firmware and latest stable version of
-    xDrip+ (2019/01/10) cannot deal with it.
+-   Follow general CGM hygiene and setting sensor recommendation [here](../Hardware/GeneralCGMRecommendation.md).
 
 ## General hints for looping with G6
 
-What’s clear is that using the G6 is perhaps a little more complex than
-it as first suggests. To use it safely, there are a few points to be
-aware of:
-
--   If you are using the native data with the calibration code in xDrip+
-    or Spike, the safest thing to do is not allow preemptive restarts of
-    the sensor.
--   If you must use preemptive restarts, then make sure you insert at a
-    time of day where you can observe the change and calibrate if
-    necessary.
--   If you are restarting sensors, either do it without the factory
-    calibration for safest results on days 11 and 12, or ensure you are
-    ready to calibrate and keep an eye on variation.
--   Pre-soaking of the G6 with factory calibration is likely to give
-    variation in results. If you do pre-soak, then to get best results,
+To use it safely, there are a few points to be aware of:
+
+-   If you are using a rebatteried or modded transmitter with xDrip+, the safest thing to do is **disable** preemptive restarts of the sensor that are anyway not needed for xDrip+.
+-   Pre-soaking of the G6 with factory calibration is likely to give variation in results. If you do pre-soak, then to get best results,
     you will probably need to calibrate the sensor.
--   If you aren’t being observant about the changes that may be taking
-    place, it may be better to revert to non-factory-calibrated mode and
-    use the system like a G5.
-
-To learn more about the details and reasons for these recommendations
-read the [complete
-article](https://www.diabettech.com/artificial-pancreas/diy-looping-and-cgm/)
-published by Tim Street at
+
+To learn more about the details and reasons for these recommendations read the [complete article](https://www.diabettech.com/artificial-pancreas/diy-looping-and-cgm/) published by Tim Street at
 [www.diabettech.com](https://www.diabettech.com).
 
 ## If using G6 with xDrip+
 
--   The Dexcom G6 transmitter can simultaneously be connected to the
-    Dexcom receiver (or alternatively the t:slim pump) and one app on
-    your phone.
--   When using xDrip+ as receiver uninstall Dexcom app first. **You
-    cannot connect xDrip+ and Dexcom app with the transmitter at the
-    same time!**
--   If you need Clarity and want to profit from xDrip+ alarms use the
-    [BYODA](DexcomG6-if-using-g6-with-build-your-own-dexcom-app)
-    with local broadcast to xDrip+.
--   If not already set up then download
-    [xDrip+](https://github.com/NightscoutFoundation/xDrip) and follow
-    instructions on [xDrip+ settings page](../Configuration/xdrip.md).
+-   The Dexcom G6 transmitter can simultaneously be connected to the Dexcom receiver (or alternatively the t:slim pump) and one app on your phone.
+-   When using xDrip+ as receiver uninstall Dexcom app first. **You cannot connect xDrip+ and Dexcom app with the transmitter at the same time!**
+-   If you need Clarity and want to profit from xDrip+ alarms use the [BYODA](DexcomG6-if-using-g6-with-build-your-own-dexcom-app) with local broadcast to xDrip+.
+-   If not already set up, download [xDrip+](https://github.com/NightscoutFoundation/xDrip) and follow the instructions on [xDrip+ settings page](../Configuration/xdrip.md).
 -   Select xDrip+ in ConfigBuilder (setting in AAPS).
--   Adjust settings in xDrip+ according to [xDrip+ settings
-    page](../Configuration/xdrip.md)
--   If AAPS does not receive BG values when phone is in airplane mode
-    use 'Identify receiver' as describe on [xDrip+ settings
+-   Adjust settings in xDrip+ according to [xDrip+ settings page](../Configuration/xdrip.md)
+-   If AAPS does not receive BG values when phone is in airplane mode use 'Identify receiver' as describe on [xDrip+ settings
     page](../Configuration/xdrip.md).
 
 (DexcomG6-if-using-g6-with-build-your-own-dexcom-app)=
 ## If using G6 with Build Your Own Dexcom App
 
--   As of December 2020 [Build Your Own Dexcom
-    App](https://docs.google.com/forms/d/e/1FAIpQLScD76G0Y-BlL4tZljaFkjlwuqhT83QlFM5v6ZEfO7gCU98iJQ/viewform?fbzx=2196386787609383750&fbclid=IwAR2aL8Cps1s6W8apUVK-gOqgGpA-McMPJj9Y8emf_P0-_gAsmJs6QwAY-o0)
-    (BYODA) also supports local broadcast to AAPS and/or xDrip+ (not for
-    G5 sensors!)
+-   As of December 2020 [Build Your Own Dexcom App](https://docs.google.com/forms/d/e/1FAIpQLScD76G0Y-BlL4tZljaFkjlwuqhT83QlFM5v6ZEfO7gCU98iJQ/viewform?fbzx=2196386787609383750&fbclid=IwAR2aL8Cps1s6W8apUVK-gOqgGpA-McMPJj9Y8emf_P0-_gAsmJs6QwAY-o0) (BYODA) also supports local broadcast to AAPS and/or xDrip+ (not for
+    G5/ONE/G7 sensors!)
 -   This app lets you use your Dexcom G6 with any Android smartphone.
--   Uninstall the original Dexcom app or patched Dexcom app if you used
-    one of those previously.
+-   Uninstall the original Dexcom app or patched Dexcom app if you used one of those previously (**do not stop** the currently running sensor)
 -   Install downloaded apk
 -   Enter sensor code and transmitter serial no. in patched app.
--   In phone settings go to apps > Dexcom G6 > permissions > additional
-    permissions and press 'Access Dexcom app'.
--   After short time BYODA should pick-up transmitter signal. (If not
-    you will have to stop sensor and start new one.)
+-   In phone settings go to apps > Dexcom G6 > permissions > additional permissions and press 'Access Dexcom app'.
+-   After short time BYODA should pick-up transmitter signal.
 
 ### Settings for AAPS
 
 -   Select 'Dexcom App (patched)' in config builder.
--   If you don't receive any values select any other data source, then
-    re-select 'Dexcom App (patched)' to trigger the demand for
-    permissions to establish the connection between AAPS and
-    BYODA-broadcast.
+-   If you don't receive any values select any other data source, then re-select 'Dexcom App (patched)' to trigger the demand for
+    permissions to establish the connection between AAPS and BYODA-broadcast.
 
 ### Settings for xDrip+
 
 -   Select '640G/Eversense' as data source.
--   Command 'start sensor' must be performed in xDrip+ in order to
-    receive values. This will not affect your current sensor controlled
-    by Build Your Own Dexcom App.
+-   Command 'start sensor' must be performed in xDrip+ in order to receive values. This will not affect your current sensor controlled by Build Your Own Dexcom App.
 
 
 (DexcomG6-troubleshooting-g6)=
 ## Troubleshooting G6
 
 ### Dexcom G6 specific troubleshooting
 
--   Transmitters with serial no. starting with 80 or 81 need at least
-    last stable xDrip+ version from May 2019 or a newer nightly build.
--   Transmitters with serial no. starting with 8G need at least nightly
-    build from July 25th, 2019 or newer.
--   xDrip+ and Dexcom app cannot be connected with the transmitter at
-    the same time.
--   Wait at least 15 min. between stopping and starting a sensor.
--   Do not rewind back time of insertion. Answer question "Did you
-    insert it today?" always with "Yes, today".
--   Do not enable "restart sensors" while setting a new sensor
--   Do not start new sensor before the following information is shown in
-    Classic Status Page -> G5/G6 status -> PhoneServiceState:
-    -   Transmitter serial starting with 80 or 81: "Got data hh:mm"
-        (i.e. "Got data 19:04")
-    -   Transmitter serial starting with 8G or 8H: "Got glucose hh:mm"
-        (i.e. "Got glucose 19:04") or "Got no raw hh:mm" (i.e. "Got now
-        raw 19:04")
-
-![xDrip+ PhoneServiceState](../images/xDrip_Dexcom_PhoneServiceState.png)
+-   Scroll down to **Troubleshooting** [here](https://navid200.github.io/xDrip/docs/Dexcom_page.html).
 
 ### General troubleshooting
 
-General Troubleshoothing for CGMs can be found
-[here](./GeneralCGMRecommendation.md#troubleshooting).
+General Troubleshooting for CGMs can be found [here](./GeneralCGMRecommendation.md#troubleshooting).
 
 ### New transmitter with running sensor
 
-If you happen to change transmitter during a running sensor session you
-might try to remove the transmitter without damaging the sensor mount. A
-video can be found at <https://youtu.be/tx-kTsrkNUM>.
+If you happen to change transmitter during a running sensor session you might try to remove the transmitter without damaging the sensor mount. A video can be found at <https://youtu.be/tx-kTsrkNUM> and [here](https://navid200.github.io/xDrip/docs/Remove-transmitter.html).