Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Updated SCU88 register and SCU90 init values #63

Closed
wants to merge 4 commits into from
Closed

Updated SCU88 register and SCU90 init values #63

wants to merge 4 commits into from

Conversation

agangidi53
Copy link

This Patch was made to change init values for SCU registers:

  1. SCU88 init value was changed
    Reason: For SCU88, bits 7:0 were set to 1. That meant, we were reading : PWMx / VPIGx instead of GPIONx (GPIONx gives us the PCIe inventory status, where x is bit number). But we were expecting PCIe inventory status (GOIONx) to show up on corresponding pin, and so it was being tied to read inventory via RESR API. Because of this PCIe inventory was showing up wrong in Barreleye server. For correcting this this commit changes the value of bits 7:0 to 0. Since SCU88 seems to be specific to how board is wired, I added a step to reinitialize this register in device specific setup.

  2. SCU90 init value was changed:
    Reason: We were seeing intermittent networking failures since SD1 pin was wrongly pulled up. (corresponding to bit 0 of SCU90). So this commit changes bit 0 of SCU90 to 0.

Description of pins 7:0 of SCU 88:
7 RW Enable PWM7 or VPIG7 function pin (SCU90[5:4]=0x2 select Video pin)
6 RW Enable PWM6 or VPIG6 function pin (SCU90[5:4]=0x2 select Video pin)
5 RW Enable PWM5 or VPIG5 function pin (SCU90[5:4]!=0 select Video pin)
4 RW Enable PWM4 or VPIG4 function pin (SCU90[5:4]!=0 select Video pin)
3 RW Enable PWM3 or VPIG3 function pin (SCU90[5:4]!=0 select Video pin)
2 RW Enable PWM2 or VPIG2 function pin (SCU90[5:4]!=0 select Video pin)
1 RW Enable PWM1 or VPIG1 function pin (SCU90[5:4]=0x3 select Video pin)
0 RW Enable PWM0 or VPIG0 function pin (SCU90[5:4]=0x3 select Video pin)

Signed-off-by: Adi Gangidi adi.gangidi@rackspace.com

This change is Reviewable

@agangidi53
Updated SCU88 register and SCU90 init values
3daa7f9 
Before This change:
a) SCU90[0]=1, function pin Incorrectly defined. It must be pull down internally.
b) For SCU88, bits 7:0 were set to 1. That is: We were reading : PWMx or VPIGx instead of GPIONx (GPIONx gives us the PCIe inventory status, where x is bit number). Because of this PCIe inventory was showing up wrong.

After This Change:
a) SCU90[0]=0 
b) Bits (7:0) of SCU 88 are set to 0 . (According to Page 111 of data sheet these have to be set to 0 for us to to read GPION0 to GPIO N7 which indicate if PCIe device is present ). 

Description of pins 0 of SCU 90:
Enable SD1 Function Pin 

Description of pins 7:0 of SCU 88:
7 RW Enable PWM7 or VPIG7 function pin  (SCU90[5:4]=0x2 select Video pin)
6 RW Enable PWM6 or VPIG6 function pin   (SCU90[5:4]=0x2 select Video pin)
5 RW Enable PWM5 or VPIG5 function pin    (SCU90[5:4]!=0 select Video pin)
4 RW Enable PWM4 or VPIG4 function pin     (SCU90[5:4]!=0 select Video pin)
3 RW Enable PWM3 or VPIG3 function pin      (SCU90[5:4]!=0 select Video pin)
2 RW Enable PWM2 or VPIG2 function pin        (SCU90[5:4]!=0 select Video pin)
1 RW Enable PWM1 or VPIG1 function pin        (SCU90[5:4]=0x3 select Video pin)
0 RW Enable PWM0 or VPIG0 function pin         (SCU90[5:4]=0x3 select Video pin)
@shenki
Copy link
Member

shenki commented Mar 18, 2016

This change has been made to the common init function. Is it common to both palmetto, barreleye and future machines?

@agangidi53
Copy link
Author

I guess it depends on how it's ASPEED chip is wired. Let me look into Palmetto Design. Not sure on future designs.

@shenki
Copy link
Member

shenki commented Mar 21, 2016

I suspect we want to put it in the board specific functions, even if it is similar for both of our currently supported boards.

@nkskjames
Copy link

@shenki: I would classify this as a bug. The PCIe slot detection is broke and the networking has an intermittent failure because of these SCU settings.

Also the pcie slot detect change is specific to Barreleye. The SD1 change is common to Palmetto and Barreleye.

@agangidi53
Barreleye SCU88 Setup to do_barreleye_setup
2c25217 
I moved the Barreleye SCU88 Setup to do_barreleye_setup.  This way the SCU88 value gets overwritten to 0x01C00000 only for Barreleye. For Palmetto it remains what it was previously. 

SCU 90 Setup though is common for chip sets we have, so it still remains in common setup.
@agangidi53
Updated SCU88 register and SCU90 init values
dd68b48 
a) Updated SCU88 init value in barreleye init
b) Updated SCU90 init values in common init
c) Removed some some white spaces
@agangidi53
Updated SCU88 register and SCU90 init values
f50c592 
a) Updated SCU88 init value in barreleye init
b) Updated SCU90 init values in common init
c) Removed some some white spaces
@shenki
Copy link
Member

shenki commented Mar 22, 2016

@agangidi53 Nice one. The code looks okay now, but the commit message needs some cleanup.

Currently it's describing what we're doing. But we don't need that; the code describes that more succinctly than words could.

Generally we want to describe the intent of the patch; why this change was made.

@agangidi53 agangidi53 closed this Mar 25, 2016
@shenki shenki reopened this Mar 29, 2016
@shenki
Copy link
Member

shenki commented Mar 29, 2016

@agangidi53 Lets keep this one open instead of opening new pull requests. It allows us both keep track of where we were in the review process. You can push updated versions of the patch to your "patch-1" branch and they will appear here.

How did you go with cleaning up the commit message?

@shenki shenki mentioned this pull request Mar 29, 2016
Closed
@agangidi53
Copy link
Author

@shenki Changed the commit message.

@shenki
Copy link
Member

shenki commented Mar 29, 2016

Adi and I worked together to clean up the commit messages. These have landed in our dev-4.4 branch at:

d72df69

3e1f620

@shenki shenki closed this Mar 29, 2016
shenki pushed a commit that referenced this pull request May 5, 2016
@shimoday @gregkh
usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handl…
f10d159 
…er()

commit 894f2fc upstream.

When unexpected situation happened (e.g. tx/rx irq happened while
DMAC is used), the usbhsf_pkt_handler() was possible to cause NULL
pointer dereference like the followings:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 80000007 [#1] SMP ARM
Modules linked in: usb_f_acm u_serial g_serial libcomposite
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-00842-gac57066-dirty #63
Hardware name: Generic R8A7790 (Flattened Device Tree)
task: c0729c00 ti: c0724000 task.ti: c0724000
PC is at 0x0
LR is at usbhsf_pkt_handler+0xac/0x118
pc : [<00000000>]    lr : [<c03257e0>]    psr: 60000193
sp : c0725db8  ip : 00000000  fp : c0725df4
r10: 00000001  r9 : 00000193  r8 : ef3ccab4
r7 : ef3cca10  r6 : eea4586c  r5 : 00000000  r4 : ef19ceb4
r3 : 00000000  r2 : 0000009c  r1 : c0725dc4  r0 : ef19ceb4

This patch adds a condition to avoid the dereference.

Fixes: e73a989 ("usb: renesas_usbhs: add DMAEngine support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
eddiejames pushed a commit to eddiejames/linux that referenced this pull request Jul 10, 2018
@holtmann
Bluetooth: Add HCI command for clear Resolv list
545f259 
Check for Resolv list supported by controller. So check the supported
commmand first before issuing this command i.e.,HCI_OP_LE_CLEAR_RESOLV_LIST

Before patch:
< HCI Command: LE Read White List... (0x08|0x000f) plen 0  openbmc#55 [hci0] 13.338168
> HCI Event: Command Complete (0x0e) plen 5                openbmc#56 [hci0] 13.338842
      LE Read White List Size (0x08|0x000f) ncmd 1
        Status: Success (0x00)
        Size: 25
< HCI Command: LE Clear White List (0x08|0x0010) plen 0    openbmc#57 [hci0] 13.339029
> HCI Event: Command Complete (0x0e) plen 4                openbmc#58 [hci0] 13.339939
      LE Clear White List (0x08|0x0010) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0  openbmc#59 [hci0] 13.340152
> HCI Event: Command Complete (0x0e) plen 5                openbmc#60 [hci0] 13.340952
      LE Read Resolving List Size (0x08|0x002a) ncmd 1
        Status: Success (0x00)
        Size: 25
< HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0  openbmc#61 [hci0] 13.341180
> HCI Event: Command Complete (0x0e) plen 12               openbmc#62 [hci0] 13.341898
      LE Read Maximum Data Length (0x08|0x002f) ncmd 1
        Status: Success (0x00)
        Max TX octets: 251
        Max TX time: 17040
        Max RX octets: 251
        Max RX time: 17040

After patch:
< HCI Command: LE Read White List... (0x08|0x000f) plen 0  openbmc#55 [hci0] 28.919131
> HCI Event: Command Complete (0x0e) plen 5                openbmc#56 [hci0] 28.920016
      LE Read White List Size (0x08|0x000f) ncmd 1
        Status: Success (0x00)
        Size: 25
< HCI Command: LE Clear White List (0x08|0x0010) plen 0    openbmc#57 [hci0] 28.920164
> HCI Event: Command Complete (0x0e) plen 4                openbmc#58 [hci0] 28.920873
      LE Clear White List (0x08|0x0010) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0  openbmc#59 [hci0] 28.921109
> HCI Event: Command Complete (0x0e) plen 5                openbmc#60 [hci0] 28.922016
      LE Read Resolving List Size (0x08|0x002a) ncmd 1
        Status: Success (0x00)
        Size: 25
< HCI Command: LE Clear Resolving... (0x08|0x0029) plen 0  openbmc#61 [hci0] 28.922166
> HCI Event: Command Complete (0x0e) plen 4                openbmc#62 [hci0] 28.922872
      LE Clear Resolving List (0x08|0x0029) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0  openbmc#63 [hci0] 28.923117
> HCI Event: Command Complete (0x0e) plen 12               openbmc#64 [hci0] 28.924030
      LE Read Maximum Data Length (0x08|0x002f) ncmd 1
        Status: Success (0x00)
        Max TX octets: 251
        Max TX time: 17040
        Max RX octets: 251
        Max RX time: 17040

Signed-off-by: Ankit Navik <ankit.p.navik@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
shenki pushed a commit that referenced this pull request Feb 25, 2020
@gregkh
ipc/msg.c: consolidate all xxxctl_down() functions
59b2e64 
commit 889b331 upstream.

A use of uninitialized memory in msgctl_down() because msqid64 in
ksys_msgctl hasn't been initialized.  The local | msqid64 | is created in
ksys_msgctl() and then passed into msgctl_down().  Along the way msqid64
is never initialized before msgctl_down() checks msqid64->msg_qbytes.

KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool)
reports:

==================================================================
BUG: KUMSAN: use of uninitialized memory in msgctl_down+0x94/0x300
Read of size 8 at addr ffff88806bb97eb8 by task syz-executor707/2022

CPU: 0 PID: 2022 Comm: syz-executor707 Not tainted 5.2.0-rc4+ #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Call Trace:
 dump_stack+0x75/0xae
 __kumsan_report+0x17c/0x3e6
 kumsan_report+0xe/0x20
 msgctl_down+0x94/0x300
 ksys_msgctl.constprop.14+0xef/0x260
 do_syscall_64+0x7e/0x1f0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x4400e9
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffd869e0598 EFLAGS: 00000246 ORIG_RAX: 0000000000000047
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004400e9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000401970
R13: 0000000000401a00 R14: 0000000000000000 R15: 0000000000000000

The buggy address belongs to the page:
page:ffffea0001aee5c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x100000000000000()
raw: 0100000000000000 0000000000000000 ffffffff01ae0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kumsan: bad access detected
==================================================================

Syzkaller reproducer:
msgctl$IPC_RMID(0x0, 0x0)

C reproducer:
// autogenerated by syzkaller (https://github.com/google/syzkaller)

int main(void)
{
  syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
  syscall(__NR_msgctl, 0, 0, 0);
  return 0;
}

[natechancellor@gmail.com: adjust indentation in ksys_msgctl]
  Link: ClangBuiltLinux#829
  Link: http://lkml.kernel.org/r/20191218032932.37479-1-natechancellor@gmail.com
Link: http://lkml.kernel.org/r/20190613014044.24234-1-shuaibinglu@126.com
Signed-off-by: Lu Shuaibing <shuaibinglu@126.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: NeilBrown <neilb@suse.com>
From: Andrew Morton <akpm@linux-foundation.org>
Subject: ipc/msg.c: consolidate all xxxctl_down() functions

Each line here overflows 80 cols by exactly one character.  Delete one tab
per line to fix.

Cc: Shaohua Li <shli@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
shenki pushed a commit that referenced this pull request Mar 5, 2020
@mhiramat @gregkh
modules: lockdep: Suppress suspicious RCU usage warning
4c50665 
[ Upstream commit bf08949 ]

While running kprobe module test, find_module_all() caused
a suspicious RCU usage warning.

-----
 =============================
 WARNING: suspicious RCU usage
 5.4.0-next-20191202+ #63 Not tainted
 -----------------------------
 kernel/module.c:619 RCU-list traversed in non-reader section!!

 other info that might help us debug this:

 rcu_scheduler_active = 2, debug_locks = 1
 1 lock held by rmmod/642:
  #0: ffffffff8227da80 (module_mutex){+.+.}, at: __x64_sys_delete_module+0x9a/0x230

 stack backtrace:
 CPU: 0 PID: 642 Comm: rmmod Not tainted 5.4.0-next-20191202+ #63
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 Call Trace:
  dump_stack+0x71/0xa0
  find_module_all+0xc1/0xd0
  __x64_sys_delete_module+0xac/0x230
  ? do_syscall_64+0x12/0x1f0
  do_syscall_64+0x50/0x1f0
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 RIP: 0033:0x4b6d49
-----

This is because list_for_each_entry_rcu(modules) is called
without rcu_read_lock(). This is safe because the module_mutex
is locked.

Pass lockdep_is_held(&module_mutex) to the list_for_each_entry_rcu()
to suppress this warning, This also fixes similar issue in
mod_find() and each_symbol_section().

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki pushed a commit that referenced this pull request Jun 24, 2020
@linusw @gregkh
ARM: 8978/1: mm: make act_mm() respect THREAD_SIZE
8cf93ef 
[ Upstream commit e1de943 ]

Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:

  bic     rd, sp, #8128
  bic     rd, rd, #63

This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).

As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.

Fix it by this little oneline suggested by Ard:

  bic     rd, sp, #(THREAD_SIZE - 1) & ~63

Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.

We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.

Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki pushed a commit that referenced this pull request Jun 24, 2021
@Junlisuzhou @gregkh
usb: chipidea: udc: assign interrupt number to USB gadget structure
2e2145c 
[ Upstream commit 9e3927f ]

Chipidea also need sync interrupt before unbind the udc while
gadget remove driver, otherwise setup irq handling may happen
while unbind, see below dump generated from android function
switch stress test:

[ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server)
[ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14)
[ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090
[ 4703.676454] Mem abort info:
[ 4703.676458]   ESR = 0x96000004
[ 4703.676461]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 4703.676464]   SET = 0, FnV = 0
[ 4703.676466]   EA = 0, S1PTW = 0
[ 4703.676468] Data abort info:
[ 4703.676471]   ISV = 0, ISS = 0x00000004
[ 4703.676473]   CM = 0, WnR = 0
[ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000
[ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000
[ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O)
[ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G        W  O      5.10.9-00001-g3f5fd8487c38-dirty #63
[ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT)
[ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.789667] lr : android_setup+0x4c/0x168
[ 4703.793676] sp : ffff80001256bd80
[ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8
[ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000
[ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140
[ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490
[ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000
[ 4703.823554] x19: 0000000000000080 x18: ffff800012561048
[ 4703.828867] x17: 0000000000000000 x16: 0000000000000039
[ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277
[ 4703.839493] x13: 0000000000003934 x12: 0000000000000000
[ 4703.844805] x11: 0000000000000000 x10: 0000000000000001
[ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090
[ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450
[ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009
[ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8
[ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090
[ 4703.876681] Call trace:
[ 4703.879129]  _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.883397]  android_setup+0x4c/0x168
[ 4703.887059]  udc_irq+0x824/0xa9c
[ 4703.890287]  ci_irq+0x124/0x148
[ 4703.893429]  __handle_irq_event_percpu+0x84/0x268
[ 4703.898131]  handle_irq_event+0x64/0x14c
[ 4703.902054]  handle_fasteoi_irq+0x110/0x210
[ 4703.906236]  __handle_domain_irq+0x8c/0xd4
[ 4703.910332]  gic_handle_irq+0x6c/0x124
[ 4703.914081]  el1_irq+0xdc/0x1c0
[ 4703.917221]  _raw_spin_unlock_irq+0x20/0x54
[ 4703.921405]  finish_task_switch+0x84/0x224
[ 4703.925502]  __schedule+0x4a4/0x734
[ 4703.928990]  schedule+0xa0/0xe8
[ 4703.932132]  do_notify_resume+0x150/0x184
[ 4703.936140]  work_pending+0xc/0x40c
[ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01)
[ 4703.945732] ---[ end trace ba5c1875ae49d53c ]---
[ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 4703.957223] SMP: stopping secondary CPUs
[ 4703.961151] Kernel Offset: disabled
[ 4703.964638] CPU features: 0x0240002,2000200c
[ 4703.968905] Memory Limit: none
[ 4703.971963] Rebooting in 5 seconds..

Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki pushed a commit that referenced this pull request Jan 31, 2022
@buszk @gregkh
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
38d8d8a 
[ Upstream commit 6ce708f ]

Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.

4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.

BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23

CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
 <IRQ>
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 __kasan_report.cold+0x37/0x7c
 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 kasan_report+0xe/0x20
 check_memory_region+0x15a/0x1d0
 memcpy+0x20/0x50
 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
 ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
 ? _raw_spin_lock_irqsave+0x7b/0xd0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? __usb_unanchor_urb+0x12f/0x210
 __usb_hcd_giveback_urb+0x1e4/0x380
 usb_giveback_urb_bh+0x241/0x4f0
 ? __hrtimer_run_queues+0x316/0x740
 ? __usb_hcd_giveback_urb+0x380/0x380
 tasklet_action_common.isra.0+0x135/0x330
 __do_softirq+0x18c/0x634
 irq_exit+0x114/0x140
 smp_apic_timer_interrupt+0xde/0x380
 apic_timer_interrupt+0xf/0x20

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
shenki pushed a commit that referenced this pull request Nov 28, 2022
@computersforpeace @gregkh
firmware: coreboot: Register bus in module init
d3f311d 
commit 6594669 upstream.

The coreboot_table driver registers a coreboot bus while probing a
"coreboot_table" device representing the coreboot table memory region.
Probing this device (i.e., registering the bus) is a dependency for the
module_init() functions of any driver for this bus (e.g.,
memconsole-coreboot.c / memconsole_driver_init()).

With synchronous probe, this dependency works OK, as the link order in
the Makefile ensures coreboot_table_driver_init() (and thus,
coreboot_table_probe()) completes before a coreboot device driver tries
to add itself to the bus.

With asynchronous probe, however, coreboot_table_probe() may race with
memconsole_driver_init(), and so we're liable to hit one of these two:

1. coreboot_driver_register() eventually hits "[...] the bus was not
   initialized.", and the memconsole driver fails to register; or
2. coreboot_driver_register() gets past #1, but still races with
   bus_register() and hits some other undefined/crashing behavior (e.g.,
   in driver_find() [1])

We can resolve this by registering the bus in our initcall, and only
deferring "device" work (scanning the coreboot memory region and
creating sub-devices) to probe().

[1] Example failure, using 'driver_async_probe=*' kernel command line:

[    0.114217] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
[    0.114307] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1 #63
[    0.114316] Hardware name: Google Scarlet (DT)
...
[    0.114488] Call trace:
[    0.114494]  _raw_spin_lock+0x34/0x60
[    0.114502]  kset_find_obj+0x28/0x84
[    0.114511]  driver_find+0x30/0x50
[    0.114520]  driver_register+0x64/0x10c
[    0.114528]  coreboot_driver_register+0x30/0x3c
[    0.114540]  memconsole_driver_init+0x24/0x30
[    0.114550]  do_one_initcall+0x154/0x2e0
[    0.114560]  do_initcall_level+0x134/0x160
[    0.114571]  do_initcalls+0x60/0xa0
[    0.114579]  do_basic_setup+0x28/0x34
[    0.114588]  kernel_init_freeable+0xf8/0x150
[    0.114596]  kernel_init+0x2c/0x12c
[    0.114607]  ret_from_fork+0x10/0x20
[    0.114624] Code: 5280002b 1100054a b900092a f9800011 (885ffc01)
[    0.114631] ---[ end trace 0000000000000000 ]---

Fixes: b81e314 ("firmware: coreboot: Make bus registration symmetric")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20221019180934.1.If29e167d8a4771b0bf4a39c89c6946ed764817b9@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
shenki pushed a commit that referenced this pull request Nov 28, 2022
@computersforpeace @gregkh
firmware: coreboot: Register bus in module init
8a9bae5 
commit 6594669 upstream.

The coreboot_table driver registers a coreboot bus while probing a
"coreboot_table" device representing the coreboot table memory region.
Probing this device (i.e., registering the bus) is a dependency for the
module_init() functions of any driver for this bus (e.g.,
memconsole-coreboot.c / memconsole_driver_init()).

With synchronous probe, this dependency works OK, as the link order in
the Makefile ensures coreboot_table_driver_init() (and thus,
coreboot_table_probe()) completes before a coreboot device driver tries
to add itself to the bus.

With asynchronous probe, however, coreboot_table_probe() may race with
memconsole_driver_init(), and so we're liable to hit one of these two:

1. coreboot_driver_register() eventually hits "[...] the bus was not
   initialized.", and the memconsole driver fails to register; or
2. coreboot_driver_register() gets past #1, but still races with
   bus_register() and hits some other undefined/crashing behavior (e.g.,
   in driver_find() [1])

We can resolve this by registering the bus in our initcall, and only
deferring "device" work (scanning the coreboot memory region and
creating sub-devices) to probe().

[1] Example failure, using 'driver_async_probe=*' kernel command line:

[    0.114217] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
[    0.114307] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1 #63
[    0.114316] Hardware name: Google Scarlet (DT)
...
[    0.114488] Call trace:
[    0.114494]  _raw_spin_lock+0x34/0x60
[    0.114502]  kset_find_obj+0x28/0x84
[    0.114511]  driver_find+0x30/0x50
[    0.114520]  driver_register+0x64/0x10c
[    0.114528]  coreboot_driver_register+0x30/0x3c
[    0.114540]  memconsole_driver_init+0x24/0x30
[    0.114550]  do_one_initcall+0x154/0x2e0
[    0.114560]  do_initcall_level+0x134/0x160
[    0.114571]  do_initcalls+0x60/0xa0
[    0.114579]  do_basic_setup+0x28/0x34
[    0.114588]  kernel_init_freeable+0xf8/0x150
[    0.114596]  kernel_init+0x2c/0x12c
[    0.114607]  ret_from_fork+0x10/0x20
[    0.114624] Code: 5280002b 1100054a b900092a f9800011 (885ffc01)
[    0.114631] ---[ end trace 0000000000000000 ]---

Fixes: b81e314 ("firmware: coreboot: Make bus registration symmetric")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20221019180934.1.If29e167d8a4771b0bf4a39c89c6946ed764817b9@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
enhancement
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.

None yet
3 participants
@agangidi53 @shenki @nkskjames