Flashing Instructions for Matchstick
Shawn Bow edited this page Jul 6, 2015
·
9 revisions
- Prepare the environment
- Unzip Firmware to a folder
- You can see Flash Tool in the folder, named "AndroidTool.exe", and MatchStick Flash Driver in the "Driver" folder
- You need a micro USB cable to connect MatchStick device to PC
- Flash Driver Support: Win7(32/64bits), Vista(32/64bits), WinXP(32Bits only), Win2000(32bits only)
- Steps to Flash
- Launch the AndroidTool.exe
- Connect the micro USB cable to PC.
- Long press reset key and connect the micro USB to MatchStick device.
- Windows will prompt you to install driver for MatchStick Flash Device, or you can also find MatchStick Flash Device in Windows Device Manager, then you should install appropriate driver in"Driver" folder according to your Windows version.
- Confirm AndroidTool status bar shows "Found One LOADER Device", as shown in Figure.
- Press “Run” button, then waiting for the flashing until the list view of right side shows "Download image OK" which means flashing successfully.
- Now you can disconnect MatchStick from PC.
Version | Platform | Download | MD5 Checksum |
---|---|---|---|
201411110758 | B2G2.0 Gonk4.2 | Link | 25af9c086a6273a94dd8ab5df3228395 |
201412300904 | B2G2.1 Gonk4.4 | Link | 7860eb7e185cc25ba7b565e61792c235 |
201502040000 | B2G2.1 Gonk4.4 | Link | 01163d6d0dba2eb4cbc90e233e0e8284 |
201504030000 | B2G2.1 Gonk4.4 | Link | 56AB7B377C669E09070229FB98158397 |
Contact: info@openflint.org
Google Groups: https://groups.google.com/forum/#!forum/openflint
-
Flint
- [Developer's Guide](Developer Guide for Flint)
- [Web Sender Apps](Web Sender App Development)
- [Android Sender Apps](Android Sender App Development)
- [iOS Sender Apps](iOS Sender App Development)
- [Receiver Apps](Receiver Apps Development)
- Chromecast App Porting
- [API Libraries](API Libraries)
- [Flint Protocol Docs](Flint Protocol Docs)
- [Developer's Guide](Developer Guide for Flint)
-
Matchstick
- [Flashing Instructions](Flashing Instructions for Matchstick)
- [Build Your Matchstick](Build Your Matchstick)
- [Flashing Your Build](Flashing Your Build)
- [Setup Your Matchstick](Setup Your Matchstick)
- [Setup USB Mode](Setup USB Mode for Matchstick)
- [Supported Media](Supported Media for Matchstick)