Merge pull request #323 from tpltnt/issue-270

Issue 270

setup/raspberrypi/Raspberry-Pi-Getting-Started.html.mako

@@ -7,9 +7,9 @@ Getting your Raspberry Pi ready for openFrameworks
 
     
 ## Install Raspbian "wheezy"
-0. Install the latest _**Raspbian "wheezy"**_ image from the [Raspberry Pi downloads page](http://www.raspberrypi.org/downloads)
+0. Install the latest _**Raspbian** (Debian Wheezy)_ image from the [Raspberry Pi downloads page](http://www.raspberrypi.org/downloads)
 1. Follow the instructions at [Raspberry Pi Preparing Your SD Card](http://elinux.org/RPi_Easy_SD_Card_Setup) to get Raspbian installed onto your SD Card
-    * **Make sure you are working with the the "hard float" version of Raspbian "wheezy", not the soft-float version (aka "Soft-float Debian "wheezy").**
+
          
 ## Configure the Raspberry Pi
 This guide assumes you are starting from a fresh Raspian install and that you are able to connect to the Raspberry Pi to give it commands.