Database update (#1660)

Signed-off-by: Chris Jackson <chris@cd-jackson.com>

doc/fibaro/fgwceu-201_0_0.md

@@ -109,6 +109,9 @@ The following table summarises the channels available for the FGWCEU-201 -:
 |--------------|------------|--------------|----------|-----------|
 | Sensor (temperature) | sensor_temperature | sensor_temperature | Temperature | Number:Temperature | 
 | Scene Number | scene_number | scene_number |  | Number | 
+| LED frame color brightness | config_decimal | config_decimal |  | Number | 
+| LED frame Color ON-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color OFF-state | config_decimal | config_decimal |  | Number | 
 | Battery Level | battery-level | system.battery_level | Battery | Number |
 
 ### Sensor (temperature)
@@ -132,6 +135,52 @@ This channel provides the scene, and the event as a decimal value in the form ``
 | 5        | 4 x keypress       |
 | 6        | 5 x keypress       |
 
+### LED frame color brightness
+0: LED disabled  
+1 - 100: 1-100% brightness  
+101: brightness directly proportional to measured power  
+102: brightness inversely proportional to measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color ON-state
+This channel allows to change the color for the LED ring of the frame when the switch is in ON.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta  
+8 – colour changes smoothly depending on measured power  
+9 – colour changes in steps depending on measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color OFF-state
+This channel allows to change the color for the LED ring of the frame when the switch is in OFF.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
 ### Battery Level
 Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.
 

doc/fibaro/fgwdeu111_0_0.md

@@ -52,6 +52,9 @@ The following table summarises the channels available for the FGWDEU -:
 | Electric meter (kWh) | meter_kwh | meter_kwh | Energy | Number | 
 | Electric meter (watts) | meter_watts | meter_watts | Energy | Number | 
 | Scene Number | scene_number | scene_number |  | Number | 
+| LED frame Color brightness | config_decimal | config_decimal |  | Number | 
+| LED frame Color OFF-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color ON-state | config_decimal | config_decimal |  | Number | 
 | Alarm (power) | alarm_power | alarm_power | Energy | Switch | 
 | Alarm (system) | alarm_system | alarm_system |  | Switch | 
 
@@ -87,6 +90,52 @@ This channel provides the scene, and the event as a decimal value in the form ``
 | 5        | 4 x keypress       |
 | 6        | 5 x keypress       |
 
+### LED frame Color brightness
+0: LED disabled  
+1 - 100: 1-100% brightness  
+101: brightness directly proportional to measured power  
+102: brightness inversely proportional to measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color OFF-state
+This channel allows to change the color for the LED ring of the frame when the switch is in OFF.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color ON-state
+This channel allows to change the color for the LED ring of the frame when the switch is in ON.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta  
+8 – colour changes smoothly depending on measured power  
+9 – colour changes in steps depending on measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
 ### Alarm (power)
 Indicates if a power alarm is triggered.
 

doc/fibaro/fgwds_0_0.md

@@ -5,7 +5,7 @@ title: FGWDS - ZWave
 
 {% include base.html %}
 
-# FGWDS WALLI SWITCH FIBARO SINGLE SWITCH
+# FGWDS Fibaro Walli Single Switch
 This describes the Z-Wave device *FGWDS*, manufactured by *[Fibargroup](http://www.fibaro.com/)* with the thing type UID of ```fibaro_fgwds_00_000```.
 
 The device is in the category of *Wall Switch*, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.
@@ -94,6 +94,9 @@ The following table summarises the channels available for the FGWDS -:
 | Switch Binary | switch_binary | switch_binary | Switch | Switch | 
 | Electric meter (kWh) | meter_kwh | meter_kwh | Energy | Number | 
 | Electric meter (watts) | meter_watts | meter_watts | Energy | Number | 
+| LED frame color ON-state | config_decimal | config_decimal |  | Number | 
+| LED frame color OFF-state | config_decimal | config_decimal |  | Number | 
+| LED frame color brightness | config_decimal | config_decimal |  | Number | 
 
 ### Switch Binary
 Switch the power on and off.
@@ -110,6 +113,52 @@ Indicates the instantaneous power consumption.
 
 The ```meter_watts``` channel is of type ```meter_watts``` and supports the ```Number``` item and is in the ```Energy``` category. This is a read only channel so will only be updated following state changes from the device.
 
+### LED frame color ON-state
+This channel allows to change the color for the LED ring of the frame when the switch is in ON.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta  
+8 – colour changes smoothly depending on measured power  
+9 – colour changes in steps depending on measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame color OFF-state
+This channel allows to change the color for the LED ring of the frame when the switch is in OFF.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame color brightness
+0: LED disabled  
+1 - 100: 1-100% brightness  
+101: brightness directly proportional to measured power  
+102: brightness inversely proportional to measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
 
 
 ## Device Configuration

doc/fibaro/fgwdseu_0_0.md

@@ -66,6 +66,9 @@ The following table summarises the channels available for the FGWDSEU-221 -:
 | Electric meter (watts) | meter_watts | meter_watts | Energy | Number | 
 | Electric meter (kWh) | meter_kwh | meter_kwh | Energy | Number | 
 | Scene Number | scene_number | scene_number |  | Number | 
+| LED frame Color ON-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color OFF-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color brightness | config_decimal | config_decimal |  | Number | 
 | Alarm (power) | alarm_power | alarm_power | Energy | Switch | 
 | Alarm (system) | alarm_system | alarm_system |  | Switch | 
 | Switch Binary | switch_binary1 | switch_binary | Switch | Switch | 
@@ -106,6 +109,53 @@ This channel provides the scene, and the event as a decimal value in the form ``
 | 5        | 4 x keypress       |
 | 6        | 5 x keypress       |
 
+### LED frame Color ON-state
+This channel allows to change the color for the LED ring of the frame when the switch is in ON.  
+The color can be assigned as follows
+
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta  
+8 – colour changes smoothly depending on measured power  
+9 – colour changes in steps depending on measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color OFF-state
+This channel allows to change the color for the LED ring of the frame when the switch is in OFF.
+
+The color can be assigned as follows
+
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color brightness
+0: LED disabled  
+1 - 100: 1-100% brightness  
+101: brightness directly proportional to measured power  
+102: brightness inversely proportional to measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
 ### Alarm (power)
 Indicates if a power alarm is triggered.
 

doc/fibaro/fgwoe011_0_0.md

@@ -49,6 +49,9 @@ The following table summarises the channels available for the FGWOE-011 -:
 | Switch | switch_binary | switch_binary | Switch | Switch | 
 | Electric meter (kWh) | meter_kwh | meter_kwh | Energy | Number | 
 | Electric meter (watts) | meter_watts | meter_watts | Energy | Number | 
+| LED frame Color ON-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color OFF-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color brightness | config_decimal | config_decimal |  | Number | 
 | Alarm (system) | alarm_system | alarm_system |  | Switch | 
 | Alarm (power) | alarm_power | alarm_power | Energy | Switch | 
 
@@ -67,6 +70,53 @@ Indicates the instantaneous power consumption.
 
 The ```meter_watts``` channel is of type ```meter_watts``` and supports the ```Number``` item and is in the ```Energy``` category. This is a read only channel so will only be updated following state changes from the device.
 
+### LED frame Color ON-state
+This channel allows to change the color for the LED ring of the frame when the device is switched ON.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta  
+8 – colour changes smoothly depending on measured power  
+9 – colour changes in steps depending on measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color OFF-state
+This channel allows to change the color for the LED ring of the frame when the switch is in OFF.
+
+The color can be assigned as follows
+
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color brightness
+0: LED disabled  
+1 - 100: 1-100% brightness  
+101: brightness directly proportional to measured power  
+102: brightness inversely proportional to measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
 ### Alarm (system)
 Indicates if a system alarm is triggered.
 

doc/fibaro/fgwreu111_0_0.md

@@ -57,6 +57,9 @@ The following table summarises the channels available for the FGWREU-111 -:
 | Electric meter (watts) | meter_watts | meter_watts | Energy | Number | 
 | Electric meter (kWh) | meter_kwh | meter_kwh | Energy | Number | 
 | Scene Number | scene_number | scene_number |  | Number | 
+| LED frame Color OFF-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color ON-state | config_decimal | config_decimal |  | Number | 
+| LED frame Color brightness | config_decimal | config_decimal |  | Number | 
 | Alarm (power) | alarm_power | alarm_power | Energy | Switch | 
 | Alarm (system) | alarm_system | alarm_system |  | Switch | 
 | Blinds Control | blinds_control1 | blinds_control | Blinds | Rollershutter | 
@@ -99,6 +102,52 @@ This channel provides the scene, and the event as a decimal value in the form ``
 | 5        | 4 x keypress       |
 | 6        | 5 x keypress       |
 
+### LED frame Color OFF-state
+This channel allows to change the color for the LED ring of the frame when the switch is in OFF.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color ON-state
+This channel allows to change the color for the LED ring of the frame when the switch is in ON.
+
+The color can be assigned as follows  
+0 – LED disabled  
+1 – White  
+2 – Red  
+3 – Green  
+4 – Blue  
+5 – Yellow  
+6 – Cyan  
+7 – Magenta  
+8 – colour changes smoothly depending on measured power  
+9 – colour changes in steps depending on measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
+### LED frame Color brightness
+0: LED disabled  
+1 - 100: 1-100% brightness  
+101: brightness directly proportional to measured power  
+102: brightness inversely proportional to measured power
+
+Generic class for configuration parameter.
+
+The ```config_decimal``` channel is of type ```config_decimal``` and supports the ```Number``` item.
+
 ### Alarm (power)
 Indicates if a power alarm is triggered.