mcp85xx: Switch TP-Link TL-WDR4900 v1 to DSA

This patch introduces DSA support for TP-Link TL-WDR4900 v1 switch. Swconfig driver for QCA8327 switch is removed because this router is only one device which use Qualcom swconfig switch. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Tested-by: Nick Hainke <vincent@systemli.org> # TP Link WDR4900 v1 (5.15)
openwrt · Feb 20, 2023 · bfa5e4e · bfa5e4e
1 parent f56ef4c
commit bfa5e4e
Show file tree

Hide file tree

Showing 8 changed files with 105 additions and 25 deletions.
diff --git a/target/linux/mpc85xx/base-files/etc/board.d/02_network b/target/linux/mpc85xx/base-files/etc/board.d/02_network
@@ -18,8 +18,7 @@ ocedo,panda)
 		"0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "6:lan" "7:lan" "8u@eth0"
 	;;
 tplink,tl-wdr4900-v1)
-	ucidef_add_switch "switch0" \
-		"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+	ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 	ucidef_set_interface_macaddr "wan" "$(macaddr_add $(mtd_get_mac_binary u-boot 0x4fc00) 1)"
 	;;
 *)

diff --git a/target/linux/mpc85xx/base-files/etc/board.d/05_compat-version b/target/linux/mpc85xx/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,15 @@
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	tplink,tl-wdr4900-v1)
+		ucidef_set_compat_version "1.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/mpc85xx/config-5.10 b/target/linux/mpc85xx/config-5.10
@@ -1,8 +1,6 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
 CONFIG_ARCH_32BIT_OFF_T=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
@@ -65,7 +63,6 @@ CONFIG_EDAC_LEGACY_SYSFS=y
 CONFIG_EDAC_MPC85XX=y
 CONFIG_EDAC_SUPPORT=y
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_FIXED_PHY=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -240,7 +237,6 @@ CONFIG_SPI_MEM=y
 CONFIG_SRCU=y
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_STX_GP3 is not set
-CONFIG_SWCONFIG=y
 CONFIG_SWPHY=y
 CONFIG_SYSCTL_EXCEPTION_TRACE=y
 CONFIG_TARGET_CPU="8540"

diff --git a/target/linux/mpc85xx/config-5.15 b/target/linux/mpc85xx/config-5.15
@@ -1,8 +1,6 @@
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
 CONFIG_ARCH_32BIT_OFF_T=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
@@ -60,7 +58,6 @@ CONFIG_EDAC_ATOMIC_SCRUB=y
 CONFIG_EDAC_LEGACY_SYSFS=y
 CONFIG_EDAC_MPC85XX=y
 CONFIG_EDAC_SUPPORT=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
 CONFIG_FIXED_PHY=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_FSL_DPAA2_SWITCH is not set
@@ -238,7 +235,6 @@ CONFIG_SPI_MEM=y
 CONFIG_SRCU=y
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_STX_GP3 is not set
-CONFIG_SWCONFIG=y
 CONFIG_SWPHY=y
 CONFIG_SYSCTL_EXCEPTION_TRACE=y
 CONFIG_TARGET_CPU="8540"

diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/tl-wdr4900-v1.dts
@@ -102,20 +102,78 @@
 		};
 
 		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				reg = <0x0>;
-				qca,ar8327-initvals = <
-					0x00004 0x07600000 /* PAD0_MODE */
-					0x00008 0x00000000 /* PAD5_MODE */
-					0x0000c 0x01000000 /* PAD6_MODE */
-					0x00010 0x40000000 /* POWER_ON_STRAP */
-					0x00050 0xcf35cf35 /* LED_CTRL0 */
-					0x00054 0xcf35cf35 /* LED_CTRL1 */
-					0x00058 0xcf35cf35 /* LED_CTRL2 */
-					0x0005c 0x03ffff00 /* LED_CTRL3 */
-					0x0007c 0x0000007e /* PORT0_STATUS */
-					0x00094 0x00000200 /* PORT6_STATUS */
-				>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+
+			switch@0 {
+				compatible = "qca,qca8327";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						ethernet = <&enet0>;
+						phy-mode = "rgmii-id";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "wan";
+						phy-handle = <&phy_port1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan1";
+						phy-handle = <&phy_port2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan2";
+						phy-handle = <&phy_port3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan3";
+						phy-handle = <&phy_port4>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan4";
+						phy-handle = <&phy_port5>;
+					};
+				};
 			};
 		};
 
@@ -128,10 +186,14 @@
 		};
 
 		enet0: ethernet@b0000 {
-			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
 			nvmem-cells = <&macaddr_uboot_4fc00>;
 			nvmem-cell-names = "mac-address";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 		};
 
 		enet1: ethernet@b1000 {

diff --git a/target/linux/mpc85xx/image/p1010.mk b/target/linux/mpc85xx/image/p1010.mk
@@ -18,6 +18,8 @@ define Device/tplink_tl-wdr4900-v1
   DEVICE_VENDOR := TP-Link
   DEVICE_MODEL := TL-WDR4900
   DEVICE_VARIANT := v1
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
   TPLINK_HEADER_VERSION := 1
   TPLINK_HWID := 0x49000001
   TPLINK_HWREV := 1

diff --git a/target/linux/mpc85xx/p1010/config-default b/target/linux/mpc85xx/p1010/config-default
@@ -1,3 +1,4 @@
+CONFIG_AT803X_PHY=y
 # CONFIG_FSL_CORENET_CF is not set
 CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
@@ -6,7 +7,15 @@ CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_QCA8K=y
+CONFIG_NET_DSA_TAG_QCA=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_PHYLINK=y
 CONFIG_REALTEK_PHY=y
 CONFIG_RED_15W_REV1=y
+CONFIG_REGMAP=y
+CONFIG_REGULATOR=y
 CONFIG_TL_WDR4900_V1=y
 CONFIG_UBIFS_FS=y
diff --git a/target/linux/mpc85xx/p1020/config-default b/target/linux/mpc85xx/p1020/config-default
@@ -43,6 +43,7 @@ CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_SMP=y
 CONFIG_SPI_GPIO=y
+CONFIG_SWCONFIG=y
 CONFIG_SWCONFIG_B53=y
 # CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
 CONFIG_SWCONFIG_B53_PHY_DRIVER=y