Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
ramips: add support for GL.iNet GL-MT1300
The GL-MT1300 is a high-performance new generation pocket-sized router that offers a powerful hardware and first-class cybersecurity protocol with unique and modern design. Specifications: - SoC: MT7621A, Dual-Core @880MHz - RAM: 256 MB DDR3 - Flash: 32 MB - Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN - Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps) - USB: 1 x USB 3.0 port - Slot: 1 x MicroSD card slot - Button: 1 x Reset button - Switch: 1 x Mode switch - LED: 1 x Blue LED + 1 x White LED MAC addresses based on vendor firmware: WAN : factory 0x4000 LAN : Mac from factory 0x4000 + 1 2.4GHz : factory 0x4 5GHz : Mac form factory 0x4 + 1 Flashing instructions: 1.Connect to one of LAN ports. 2.Set the static IP on the PC to 192.168.1.2. 3.Press the Reset button and power the device (do not release the button). After waiting for the blue led to flash 5 times, the white led will come on and release the button. 4.Browse the 192.168.1.1 web page and update firmware according to web tips. 5.The blue led will flash when the firmware is being upgraded. 6.The blue led stops blinking to indicate that the firmware upgrade is complete and U-Boot automatically starts the firmware. For more information on GL-MT1300, see the OFFICIAL GL.iNet website: https://www.gl-inet.com/products/gl-mt1300/ Signed-off-by: Xinfa Deng <xinfa.deng@gl-inet.com> [add input-type for switch, wrap long line in 10_fix_wifi_mac] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
- Loading branch information
Showing
4 changed files
with
165 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,151 @@ | ||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT | ||
|
||
#include "mt7621.dtsi" | ||
|
||
#include <dt-bindings/gpio/gpio.h> | ||
#include <dt-bindings/input/input.h> | ||
|
||
/ { | ||
compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc"; | ||
model = "GL.iNet GL-MT1300"; | ||
|
||
aliases { | ||
led-boot = &led_run; | ||
led-failsafe = &led_run; | ||
led-running = &led_run; | ||
led-upgrade = &led_run; | ||
label-mac-device = &wan; | ||
}; | ||
|
||
chosen { | ||
bootargs = "console=ttyS0,115200"; | ||
}; | ||
|
||
keys { | ||
compatible = "gpio-keys"; | ||
|
||
reset { | ||
label = "reset"; | ||
gpios = <&gpio 18 GPIO_ACTIVE_LOW>; | ||
linux,code = <KEY_RESTART>; | ||
}; | ||
|
||
switch { | ||
label = "switch"; | ||
gpios = <&gpio 16 GPIO_ACTIVE_LOW>; | ||
linux,code = <BTN_0>; | ||
linux,input-type = <EV_SW>; | ||
}; | ||
}; | ||
|
||
leds { | ||
compatible = "gpio-leds"; | ||
|
||
led_run: run { | ||
label = "blue:run"; | ||
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; | ||
}; | ||
|
||
system { | ||
label = "white:system"; | ||
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; | ||
}; | ||
}; | ||
}; | ||
|
||
&i2c { | ||
status = "okay"; | ||
}; | ||
|
||
&sdhci { | ||
status = "okay"; | ||
}; | ||
|
||
&spi0 { | ||
status = "okay"; | ||
|
||
flash@0 { | ||
compatible = "mx25l25635f", "jedec,spi-nor"; | ||
reg = <0>; | ||
spi-max-frequency = <80000000>; | ||
m25p,fast-read; | ||
|
||
partitions { | ||
compatible = "fixed-partitions"; | ||
#address-cells = <1>; | ||
#size-cells = <1>; | ||
|
||
partition@0 { | ||
label = "u-boot"; | ||
reg = <0x0 0x30000>; | ||
read-only; | ||
}; | ||
|
||
partition@30000 { | ||
label = "u-boot-env"; | ||
reg = <0x30000 0x10000>; | ||
read-only; | ||
}; | ||
|
||
factory: partition@40000 { | ||
label = "factory"; | ||
reg = <0x40000 0x10000>; | ||
read-only; | ||
}; | ||
|
||
partition@50000 { | ||
compatible = "denx,uimage"; | ||
label = "firmware"; | ||
reg = <0x50000 0x1fb0000>; | ||
}; | ||
}; | ||
}; | ||
}; | ||
|
||
&pcie { | ||
status = "okay"; | ||
}; | ||
|
||
&pcie0 { | ||
wifi@0,0 { | ||
compatible = "mediatek,mt76"; | ||
reg = <0x0000 0 0 0 0>; | ||
mediatek,mtd-eeprom = <&factory 0x0>; | ||
}; | ||
}; | ||
|
||
&gmac0 { | ||
mtd-mac-address = <&factory 0x4000>; | ||
mtd-mac-address-increment = <1>; | ||
}; | ||
|
||
&switch0 { | ||
ports { | ||
port@2 { | ||
status = "okay"; | ||
label = "lan1"; | ||
}; | ||
|
||
port@3 { | ||
status = "okay"; | ||
label = "lan2"; | ||
}; | ||
|
||
wan: port@4 { | ||
status = "okay"; | ||
label = "wan"; | ||
mtd-mac-address = <&factory 0x4000>; | ||
}; | ||
}; | ||
}; | ||
|
||
&uartlite3 { | ||
status = "okay"; | ||
}; | ||
|
||
&state_default { | ||
gpio { | ||
group = "wdt", "jtag"; | ||
function = "gpio"; | ||
}; | ||
}; |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
d89a7f0
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
👍