[23.05] ipq806x: mr42/mr52: fix PCIe ports #15512
Merged
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
All three PCIe ports are reported non working on Meraki MR42/MR52 boards since kernel 6.1 with the issue of PCIe PHY link never coming up thus no WLAN cards are available on the boards.
After debugging it seems that PCIe worked on 5.15 and older purely by accident as device DTS was using /delete-property/ perst-gpios; in each of the 3 PCIe nodes but there was no "perst-gpios" property in the SoC DTSI as it was still using the older "perst-gpio" property so it was not getting removed from the device DTS.
However, in kernel 6.1 commit ("ARM: dts: qcom-*: replace deprecated perst-gpio with perst-gpios") updated all Qualcomm DTS-es to use the newer "perst-gpios" and thus once ipq806x moved to 6.1 PCIe stopped working as now that property was being dropped from the device DTS.
So, since the removal of PERST pins seems to have been wrong from the start lets drop the property removal from MR42/MR52.
Fixes: #15408
Link: #15509