ramips: Add support for Sercomm S1500 clones #4770

MaxS0niX · 2021-11-15T16:46:39Z

This PR adds support for wireless routers:
OEM/ODM Serсomm S1500 AWI - Beeline SmartBox PRO
OEM/ODM Serсomm S1500 BUC - WiFire S1500.NBN

Installation

Web UI Update
1. Rename the firmware so that there are no dots in the name, except
  for the dot in the ".img" file type. Example "openwrt-factory.img".
2. Upload and update the firmware via the original web interface.

Remark: You might need make the 2rd step twice if your running firmware
is booted from the Slot 1 (Sercomm0 bootflag). The stock firmware
reverses the bootflag (Sercomm0 / Sercomm1) on each firmware update.

Discussion forum topic:

Adding support for Sercomm S1500 clones (Beeline SmartBox Pro, WiFire S1500.NBN)

Related devices (SerComm OEM/ODM):

Sercomm S1500 - ramips: Add support for Sercomm S1500 clones #4770
- Beeline SmartBox PRO
- WiFire S1500.NBN
Sercomm S2
- Beeline SmartBox GIGA - ✔️ ramips: add support for Beeline SmartBox GIGA #4195
Sercomm S3
- Beeline SmartBox TURBO+ - ramips: Add support for Beeline SmartBox TURBO+ #4108
- Beeline SmartBox TURBO - ✔️ ramips: add support for Beeline SmartBox TURBO #10118
- Etisalat Sercomm S3
- Rostelecom RT-SF-1
- Rostelecom RT-FE-1

adschm · 2021-11-18T08:25:56Z

target/linux/ramips/image/mt7621.mk

+  IMAGE/kernel.bin := append-ubi | sercomm-tag-header-kernel 0x1700100 0x1f00000
+  IMAGE/rootfs.bin := append-ubi | check-size
+  IMAGE/factory.img := append-ubi | sercomm-tag-factory-img-pro 0x1700100 0x1f00000 0x1b00100 0x3d00000
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata


What do we need all these images for? Commit message only mentions sysupgrade and initramfs.

Left for the duration of the tests. Then leave only factory & sysupgrade?

adschm · 2021-11-18T08:27:12Z

target/linux/ramips/dts/mt7621_beeline_smartbox-pro.dts

+
+		nvmem-cells = <&macaddr_factory_21000>;
+		nvmem-cell-names = "mac-address";
+		mac-address-increment = <3>;


Please add a MAC address overview to the commit message.
https://openwrt.org/docs/guide-developer/device-support-policies#mac_addresses

Added to commit. Also described here.
https://forum.openwrt.org/t/adding-support-for-sercomm-s1500-clones-beeline-smartbox-pro-wifire-s1500-nbn/110065/15?u=maxs0nix

adschm · 2021-11-18T08:28:09Z

target/linux/ramips/dts/mt7621_beeline_smartbox-pro.dts

+		led-boot = &status_white;
+		led-failsafe = &wlan2g;
+		led-running = &status_blue;
+		led-upgrade = &wlan5g;


If there are status LEDs available, please don't hijack LED with other purposes.

adschm · 2021-11-18T08:29:06Z

Please don't change you new scripts again in each patch. One commit for providing the proper script, one commit for adding the device.

MaxS0niX · 2021-11-25T18:56:51Z

48b2344 - Changes:

The repository was updated to the current state of master.
Correct MAC's.
Correct bootloader environment.
ubi-concat

MaxS0niX · 2022-05-12T15:58:54Z

cad82b5 - Changes:

The repository was updated to the current state of master.
LED functions moved to 01_leds
"ROUT<->REP Switch_bt" turns off Wi-Fi
Used firmware-utils Sercomm

There are several questions:

Is it possible to issue a Pull Request to the firmware-utils repository via github?
LEDs do not work for Link 1Gb/s event. How to fix?)
Is it possible to add to the device in the next v22.03.x release?
There is a similar device WiFire S1500.NBN is it better to add it in this PR with a common dtsi or a separate one?

hauke · 2022-05-13T18:15:32Z

Is it possible to issue a Pull Request to the firmware-utils repository via github?

No, you have to send a patch to the openwrt devel malling list

Is it possible to add to the device in the next v22.03.x release?

It should first go into master

There is a similar device WiFire S1500.NBN is it better to add it in this PR with a common dtsi or a separate one?

If you have a common dtsi file it is probably easier to add it in one pull request, but in different commits.

hauke · 2022-05-13T21:26:08Z

This should be fine:

Common dtsi
dts PRO + changes in mt7621.mk
dts NBN + changes in mt7621.mk

MaxS0niX · 2022-05-14T05:11:42Z

This should be fine:

1. Common dtsi

2. dts PRO + changes in mt7621.mk

3. dts NBN + changes in mt7621.mk

Thanks for the clarification!

This PR adds support for wireless routers: OEM/ODM Serсomm S1500 AWI - Beeline SmartBox PRO OEM/ODM Serсomm S1500 BUC - WiFire S1500.NBN General specification ------------- SoC Type: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless 2.4 GHz (MT7602EN): b/g/n, 2x2 Wireless 5 GHz (MT7612EN): a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe (via J2 on PCB, Not soldered on the board) UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek PCB: AWI00E-1.6 Beeline SmartBox PRO specification ------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------- RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC addresses PRO as verified by OEM firmware: use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses NBN as verified by OEM firmware: use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 Installation ------------ * Web UI Update 1. Rename the firmware so that there are no dots in the name, except for the dot in the ".img" file type. Example "openwrt-factory.img". 2. Upload and update the firmware via the original web interface. Remark: You might need make the 2rd step twice if your running firmware is booted from the Slot 1 (Sercomm0 bootflag). The stock firmware reverses the bootflag (Sercomm0 / Sercomm1) on each firmware update. Tested-by: Pavel Ivanov <pi635v@gmail.com> Signed-off-by: Maximilian Weinmann <x1@disroot.org>

neheb · 2022-07-21T07:19:16Z

Only thing I see is the lack of GPIO controlled switch LEDs.

Please adjust to be compatible with #10238

This commit adds support for following wireless routers: - Beeline SmartBox PRO (Serсomm S1500 AWI) - WiFire S1500.NBN (Serсomm S1500 BUC) This commit is based on this PR: - Link: openwrt#4770 - Author: Maximilian Weinmann <x1@disroot.org> The opening of this PR was agreed with author. My changes: - Sorting, minor changes and some movings between dts and dtsi - Move leds to dts when possible - Recipes for the factory image - Update of the installation/recovery/return to stock guides - Add reset GPIO for the pcie1 Common specification -------------------- SoC: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2 Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe: via J2 on PCB, not soldered on the board UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek Beeline SmartBox PRO specification ---------------------------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------------------------ RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC address table (PRO) ----------------------- use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses (NBN) ------------------- use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 OEM easy installation --------------------- 1. Remove all dots from the factory image filename (except the dot before file extension) 2. Upload and update the firmware via the original web interface 3. Two options are possible after the reboot: a. OpenWrt - that's OK, the mission accomplished b. Stock firmware - install Stock firmware (to switch booflag from Sercomm0 to Sercomm1) and then OpenWrt factory image. Return to Stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2 reboot 2. Install stock firmware via the web OEM firmware interface Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery Tested-by: Pavel Ivanov <pi635v@gmail.com> Tested-by: Denis Myshaev <denis.myshaev@gmail.com> Tested-by: Oleg Galeev <olegingaleev@gmail.com> Tested-By: Ivan Pavlov <AuthorReflex@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

This commit adds support for following wireless routers: - Beeline SmartBox PRO (Serсomm S1500 AWI) - WiFire S1500.NBN (Serсomm S1500 BUC) This commit is based on this PR: - Link: openwrt#4770 - Author: Maximilian Weinmann <x1@disroot.org> The opening of this PR was agreed with author. My changes: - Sorting, minor changes and some movings between dts and dtsi - Move leds to dts when possible - Recipes for the factory image - Update of the installation/recovery/return to stock guides - Add reset GPIO for the pcie1 Common specification -------------------- SoC: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2 Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe: via J2 on PCB, not soldered on the board UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek Beeline SmartBox PRO specification ---------------------------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------------------------ RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC address table (PRO) ----------------------- use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses (NBN) ------------------- use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 OEM easy installation --------------------- 1. Remove all dots from the factory image filename (except the dot before file extension) 2. Upload and update the firmware via the original web interface 3. Two options are possible after the reboot: a. OpenWrt - that's OK, the mission accomplished b. Stock firmware - install Stock firmware (to switch booflag from Sercomm0 to Sercomm1) and then OpenWrt factory image. Return to Stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2 reboot 2. Install stock firmware via the web OEM firmware interface Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery Tested-by: Pavel Ivanov <pi635v@gmail.com> Tested-by: Denis Myshaev <denis.myshaev@gmail.com> Tested-by: Oleg Galeev <olegingaleev@gmail.com> Tested-By: Ivan Pavlov <AuthorReflex@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit 2d6784a)

This commit adds support for following wireless routers: - Beeline SmartBox PRO (Serсomm S1500 AWI) - WiFire S1500.NBN (Serсomm S1500 BUC) This commit is based on this PR: - Link: openwrt#4770 - Author: Maximilian Weinmann <x1@disroot.org> The opening of this PR was agreed with author. My changes: - Sorting, minor changes and some movings between dts and dtsi - Move leds to dts when possible - Recipes for the factory image - Update of the installation/recovery/return to stock guides - Add reset GPIO for the pcie1 Common specification -------------------- SoC: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2 Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe: via J2 on PCB, not soldered on the board UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek Beeline SmartBox PRO specification ---------------------------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------------------------ RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC address table (PRO) ----------------------- use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses (NBN) ------------------- use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 OEM easy installation --------------------- 1. Remove all dots from the factory image filename (except the dot before file extension) 2. Upload and update the firmware via the original web interface 3. Two options are possible after the reboot: a. OpenWrt - that's OK, the mission accomplished b. Stock firmware - install Stock firmware (to switch booflag from Sercomm0 to Sercomm1) and then OpenWrt factory image. Return to Stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2 reboot 2. Install stock firmware via the web OEM firmware interface Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery Tested-by: Pavel Ivanov <pi635v@gmail.com> Tested-by: Denis Myshaev <denis.myshaev@gmail.com> Tested-by: Oleg Galeev <olegingaleev@gmail.com> Tested-By: Ivan Pavlov <AuthorReflex@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

This commit adds support for following wireless routers: - Beeline SmartBox PRO (Serсomm S1500 AWI) - WiFire S1500.NBN (Serсomm S1500 BUC) This commit is based on this PR: - Link: openwrt/openwrt#4770 - Author: Maximilian Weinmann <x1@disroot.org> The opening of this PR was agreed with author. My changes: - Sorting, minor changes and some movings between dts and dtsi - Move leds to dts when possible - Recipes for the factory image - Update of the installation/recovery/return to stock guides - Add reset GPIO for the pcie1 Common specification -------------------- SoC: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2 Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe: via J2 on PCB, not soldered on the board UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek Beeline SmartBox PRO specification ---------------------------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------------------------ RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC address table (PRO) ----------------------- use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses (NBN) ------------------- use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 OEM easy installation --------------------- 1. Remove all dots from the factory image filename (except the dot before file extension) 2. Upload and update the firmware via the original web interface 3. Two options are possible after the reboot: a. OpenWrt - that's OK, the mission accomplished b. Stock firmware - install Stock firmware (to switch booflag from Sercomm0 to Sercomm1) and then OpenWrt factory image. Return to Stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2 reboot 2. Install stock firmware via the web OEM firmware interface Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery Tested-by: Pavel Ivanov <pi635v@gmail.com> Tested-by: Denis Myshaev <denis.myshaev@gmail.com> Tested-by: Oleg Galeev <olegingaleev@gmail.com> Tested-By: Ivan Pavlov <AuthorReflex@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>

This commit adds support for following wireless routers: - Beeline SmartBox PRO (Serсomm S1500 AWI) - WiFire S1500.NBN (Serсomm S1500 BUC) This commit is based on this PR: - Link: openwrt/openwrt#4770 - Author: Maximilian Weinmann <x1@disroot.org> The opening of this PR was agreed with author. My changes: - Sorting, minor changes and some movings between dts and dtsi - Move leds to dts when possible - Recipes for the factory image - Update of the installation/recovery/return to stock guides - Add reset GPIO for the pcie1 Common specification -------------------- SoC: MediaTek MT7621AT (880 MHz, 2 cores) Switch: MediaTek MT7530 (via SoC MT7621AT) Wireless: 2.4 GHz, MT7602EN, b/g/n, 2x2 Wireless: 5 GHz, MT7612EN, a/n/ac, 2x2 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) Mini PCIe: via J2 on PCB, not soldered on the board UART: J4 -> GND[], TX, VCC(3.3V), RX BootLoader: U-Boot SerComm/Mediatek Beeline SmartBox PRO specification ---------------------------------- RAM (Nanya NT5CB128M16FP): 256 MiB NAND-Flash (ESMT F59L2G81A): 256 MiB USB ports: 2xUSB2.0 LEDs: Status (white), WPS (blue), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (reset, wps), 1 switch button (ROUT<->REP) Power: 12 VDC, 1.5 A PCB Sticker: 970AWI0QW00N256SMT Ver. 1.0 CSN: SG15******** MAC LAN: 94:4A:0C:**:**:** Manufacturer's code: 0AWI0500QW1 WiFire S1500.NBN specification ------------------------------ RAM (Nanya NT5CC64M16GP): 128 MiB NAND-Flash (ESMT F59L1G81MA): 128 MiB USB ports: 1xUSB2.0 LEDs: Status (white), WPS (white), 2g (white), 5g (white) + 10 LED Ethernet Buttons: 2 button (RESET, WPS) Power: 12 VDC, 1.0 A PCB Sticker: 970BUC0RW00N128SMT Ver. 1.0 CSN: MH16******** MAC WAN: E0:60:66:**:**:** Manufacturer's code: 0BUC0500RW1 MAC address table (PRO) ----------------------- use address source LAN *:23 factory 0x1000 (label) WAN *:24 factory $label +1 2g *:23 factory $label 5g *:25 factory $label +2 MAC addresses (NBN) ------------------- use address source LAN *:0e factory 0x1000 WAN *:0f LAN +1 (label) 2g *:0f LAN +1 5g *:10 LAN +2 OEM easy installation --------------------- 1. Remove all dots from the factory image filename (except the dot before file extension) 2. Upload and update the firmware via the original web interface 3. Two options are possible after the reboot: a. OpenWrt - that's OK, the mission accomplished b. Stock firmware - install Stock firmware (to switch booflag from Sercomm0 to Sercomm1) and then OpenWrt factory image. Return to Stock --------------- 1. Change the bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock2 reboot 2. Install stock firmware via the web OEM firmware interface Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery Tested-by: Pavel Ivanov <pi635v@gmail.com> Tested-by: Denis Myshaev <denis.myshaev@gmail.com> Tested-by: Oleg Galeev <olegingaleev@gmail.com> Tested-By: Ivan Pavlov <AuthorReflex@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com> (cherry picked from commit 2d6784a033a994043759fa3b94c48afd5df81f88)

mans0n added the target/ramips pull request/issue for ramips target label Nov 16, 2021

adschm added the work in progress pull request the author is still working on label Nov 18, 2021

adschm reviewed Nov 18, 2021

View reviewed changes

MaxS0niX force-pushed the sercomm-s3_beeline-smartbox-pro branch from 7d50fe6 to 48b2344 Compare November 25, 2021 18:39

csharper2005 mentioned this pull request Jan 5, 2022

ramips: add support for Beeline SmartBox Flash #4922

Closed

MaxS0niX force-pushed the sercomm-s3_beeline-smartbox-pro branch from 48b2344 to cad82b5 Compare May 12, 2022 15:38

MaxS0niX marked this pull request as ready for review May 12, 2022 15:59

SopaDeMacaco-UmaDelicia mentioned this pull request Jun 15, 2022

Arcadyan WG4хх223 routers: getting MACs from the encrypted partitions #10062

Closed

7 tasks

MaxS0niX marked this pull request as draft July 6, 2022 12:24

MaxS0niX force-pushed the sercomm-s3_beeline-smartbox-pro branch from cad82b5 to 8425300 Compare July 6, 2022 16:07

MaxS0niX changed the title ~~ramips: Add support for Beeline SmartBox PRO~~ ramips: Add support for Sercomm S1500 clones Jul 6, 2022

MaxS0niX marked this pull request as ready for review July 6, 2022 16:20

MaxS0niX mentioned this pull request Jul 6, 2022

ramips: Add support for Beeline SmartBox TURBO+ #4108

Closed

MaxS0niX marked this pull request as draft August 16, 2022 14:41

MaxS0niX closed this Jun 12, 2023

csharper2005 mentioned this pull request Jun 12, 2023

ramips: add support for Sercomm S1500 devices #12890

Merged

MaxS0niX deleted the sercomm-s3_beeline-smartbox-pro branch October 20, 2023 13:11

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ramips: Add support for Sercomm S1500 clones #4770

ramips: Add support for Sercomm S1500 clones #4770

MaxS0niX commented Nov 15, 2021 •

edited

Loading

adschm Nov 18, 2021

MaxS0niX Nov 25, 2021

adschm Nov 18, 2021

MaxS0niX Mar 20, 2022

adschm Nov 18, 2021

MaxS0niX Nov 25, 2021

adschm commented Nov 18, 2021

MaxS0niX commented Nov 25, 2021

MaxS0niX commented May 12, 2022

hauke commented May 13, 2022 •

edited

Loading

hauke commented May 13, 2022

MaxS0niX commented May 14, 2022

neheb commented Jul 21, 2022

ramips: Add support for Sercomm S1500 clones #4770

ramips: Add support for Sercomm S1500 clones #4770

Conversation

MaxS0niX commented Nov 15, 2021 • edited Loading

Installation

Discussion forum topic:

Related devices (SerComm OEM/ODM):

adschm Nov 18, 2021

Choose a reason for hiding this comment

MaxS0niX Nov 25, 2021

Choose a reason for hiding this comment

adschm Nov 18, 2021

Choose a reason for hiding this comment

MaxS0niX Mar 20, 2022

Choose a reason for hiding this comment

adschm Nov 18, 2021

Choose a reason for hiding this comment

MaxS0niX Nov 25, 2021

Choose a reason for hiding this comment

adschm commented Nov 18, 2021

MaxS0niX commented Nov 25, 2021

MaxS0niX commented May 12, 2022

hauke commented May 13, 2022 • edited Loading

hauke commented May 13, 2022

MaxS0niX commented May 14, 2022

neheb commented Jul 21, 2022

MaxS0niX commented Nov 15, 2021 •

edited

Loading

hauke commented May 13, 2022 •

edited

Loading