Avoid memory copy when verifying raidz/draid parity. #13613

amotin · 2022-07-01T02:56:51Z

Before this change for every valid parity column raidz_parity_verify() allocated new buffer and copied there existing data, then recalculated the parity and compared the result with the copy. This patch removes the memory copy, simply swapping original buffer pointers with newly allocated empty ones for parity recalculation and comparison. Original buffers with potentially incorrect parity data are then just freed, while new recalculated ones are used for repair.

On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this change reduces memory traffic during scrub by 17% and total unhalted CPU time by 25%.

Types of changes

Bug fix (non-breaking change which fixes an issue)
New feature (non-breaking change which adds functionality)
Performance enhancement (non-breaking change which improves efficiency)
Code cleanup (non-breaking change which makes code smaller or more readable)
Breaking change (fix or feature that would cause existing functionality to change)
Library ABI change (libzfs, libzfs_core, libnvpair, libuutil and libzfsbootenv)
Documentation (a change to man pages or other documentation)

Checklist:

My code follows the OpenZFS code style requirements.
I have updated the documentation accordingly.
I have read the contributing document.
I have added tests to cover my changes.
I have run the ZFS Test Suite with this change applied.
All commit messages are properly formatted and contain Signed-off-by.

Before this change for every valid parity column raidz_parity_verify() allocated new buffer and copied there existing data, then recalculated the parity and compared the result with the copy. This patch removes the memory copy, simply swapping original buffer pointers with newly allocated empty ones for parity recalculation and comparison. Original buffers with potentially incorrect parity data are then just freed, while new recalculated ones are used for repair. On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this change reduces memory traffic during scrub by 17% and total unhalted CPU time by 25%. Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc.

Before this change for every valid parity column raidz_parity_verify() allocated new buffer and copied there existing data, then recalculated the parity and compared the result with the copy. This patch removes the memory copy, simply swapping original buffer pointers with newly allocated empty ones for parity recalculation and comparison. Original buffers with potentially incorrect parity data are then just freed, while new recalculated ones are used for repair. On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this change reduces memory traffic during scrub by 17% and total unhalted CPU time by 25%. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes openzfs#13613

Before this change for every valid parity column raidz_parity_verify() allocated new buffer and copied there existing data, then recalculated the parity and compared the result with the copy. This patch removes the memory copy, simply swapping original buffer pointers with newly allocated empty ones for parity recalculation and comparison. Original buffers with potentially incorrect parity data are then just freed, while new recalculated ones are used for repair. On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this change reduces memory traffic during scrub by 17% and total unhalted CPU time by 25%. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13613

commit e8cf3a4f7662f2d1c13684ce52b73ab0d9a12266 Author: Alek P <alek-p@users.noreply.github.com> Date: Thu Jul 28 18:52:46 2022 -0400 Implement a new type of zfs receive: corrective receive (-c) This type of recv is used to heal corrupted data when a replica of the data already exists (in the form of a send file for example). With the provided send stream, corrective receive will read from disk blocks described by the WRITE records. When any of the reads come back with ECKSUM we use the data from the corresponding WRITE record to rewrite the corrupted block. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Paul Zuchowski <pzuchowski@datto.com> Signed-off-by: Alek Pinchuk <apinchuk@axcient.com> Closes #9372 commit 5fae33e04771e255f3dba57263fd06eb68bd38b5 Author: Tino Reichardt <milky-zfs@mcmilk.de> Date: Thu Jul 28 23:19:41 2022 +0200 FreeBSD compile fix The file module/os/freebsd/zfs/zfs_ioctl_compat.c fails compiling because of this error: 'static' is not at beginning of declaration This commit fixes the three places within that file. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Closes #13702 commit 34aa0f0487705671c81262adb7646a90d15c5a12 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Tue Jul 26 14:39:23 2022 -0700 ZTS: Fix io_uring support check Not all Linux distribution kernels enable io_uring support by default. Update the run time check to verify that the booted kernel was built with CONFIG_IO_URING=y. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Co-authored-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13648 Closes #13685 commit 3a1ce4914172ce4c1e39123cd31b1e5245765a5e Author: Ameer Hamza <106930537+ixhamza@users.noreply.github.com> Date: Tue Jul 26 02:04:46 2022 +0500 Add createtxg sort support for simple snapshot iterator - When iterating snapshots with name only, e.g., "-o name -s name", libzfs uses simple snapshot iterator and results are displayed in alphabetic order. This PR adds support for faster version of createtxg sort by avoiding nvlist parsing for properties. Flags "-o name -s createtxg" will enable createtxg sort while using simple snapshot iterator. - Added support to read createtxg property directly from zfs handle for filesystem, volume and snapshot types instead of parsing nvlist. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com> Closes #13577 commit 8792dd24cd9599cf506d45bcaed3af78c8cd888d Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jul 25 09:52:42 2022 -0700 ZTS: Fix occasional inherit_001_pos.ksh failure The mountpoint may still be busy when the `zfs unmount -a` command is run causing an unexpected failure. Retry the unmount a couple of times since it should not remain busy for long. 19:10:50.29 NOTE: Reading state from .../inheritance/state021.cfg 19:10:50.32 cannot unmount '/TESTPOOL': pool or dataset is busy 19:10:50.32 ERROR: zfs unmount -a exited 1 Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13686 commit bf61a507a276866d691a2b56866302bc42145af3 Author: Christian Schwarz <christian.schwarz@nutanix.com> Date: Thu Jul 21 02:16:29 2022 +0200 zdb: dump spill block pointer if present Output will look like so: $ sudo zdb -dddd -vv testpool/fs 2 Dataset testpool/fs [ZPL], ID 260, cr_txg 8, 25K, 7 objects, rootbp DVA[0]=<0:1800be00:200> DVA[1]=<0:1c00be00:200> [L0 DMU objset] fletcher4 lz4 unencrypted LE contiguous unique double size=1000L/200P birth=16L/16P fill=7 cksum=d03b396cd:489ca835517:d4b04a4d0a62:1b413aac454d53 Object lvl iblk dblk dsize dnsize lsize %full type 2 1 128K 512 1K 512 512 0.00 ZFS plain file (K=inherit) (Z=inherit=lz4) 192 bonus System attributes dnode flags: USED_BYTES USERUSED_ACCOUNTED USEROBJUSED_ACCOUNTED SPILL_BLKPTR dnode maxblkid: 0 path /testfile uid 0 gid 0 atime Fri Jul 15 12:36:35 2022 mtime Fri Jul 15 12:36:35 2022 ctime Fri Jul 15 12:36:51 2022 crtime Fri Jul 15 12:36:35 2022 gen 10 mode 100600 size 0 parent 34 links 1 pflags 840800000004 SA xattrs: 248 bytes, 2 entries security.selinux = nutanix_u:object_r:unlabeled_t:s0\000 user.foo = xbLQJjyVvEVPGGuRHV/gjkFFO1MdehKnLjjd36ZaoMVaUqtqFoMMYT5Ya9yywHApJNoK/1hNJfO3\012XCJWv9/QUTKamoWW9xVDE7yi8zn166RNw5QUhf84cZ3JNLnw6oN Spill block: 0:10005c00:200 0:14005c00:200 200L/200P F=1 B=16/16 cksum=1cdfac47a4:910c5caa557:195d0493dfe5a:332b6fde6ad547 Indirect blocks: Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Christian Schwarz <christian.schwarz@nutanix.com> Closes #13640 commit fb087146de0118108e3b44222d2052415dcb1f7f Author: ixhamza <106930537+ixhamza@users.noreply.github.com> Date: Thu Jul 21 05:14:06 2022 +0500 Add support for per dataset zil stats and use wmsum counters ZIL kstats are reported in an inclusive way, i.e., same counters are shared to capture all the activities happening in zil. Added support to report zil stats for every datset individually by combining them with already exposed dataset kstats. Wmsum uses per cpu counters and provide less overhead as compared to atomic operations. Updated zil kstats to replace wmsum counters to avoid atomic operations. Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com> Closes #13636 commit 33dba8c79224ce33dc661d545ab1d17fc3d84a0c Author: Alexander Motin <mav@FreeBSD.org> Date: Wed Jul 20 20:02:36 2022 -0400 Fix scrub resume from newly created hole It may happen that scan bookmark points to a block that was turned into a part of a big hole. In such case dsl_scan_visitbp() may skip it and dsl_scan_check_resume() will not be called for it. As result new scan suspend won't be possible until the end of the object, that may take hours if the object is a multi-terabyte ZVOL on a slow HDD pool, stretching TXG to all that time, creating all sorts of problems. This patch changes the resume condition to any greater or equal block, so even if we miss the bookmarked block, the next one we find will delete the bookmark, allowing new suspend. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13643 commit 97fd1ea42a59b85ca29c91056ceef56c12cfae0b Author: Tino Reichardt <milky-zfs@mcmilk.de> Date: Thu Jul 21 02:01:32 2022 +0200 Fix memory allocation for the checksum benchmark Allocation via kmem_cache_alloc() is limited to less then 4m for some architectures. This commit limits the benchmarks with the linear abd cache to 1m on all architectures and adds 4m + 16m benchmarks via non-linear abd_alloc(). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Co-authored-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Closes #13669 Closes #13670 commit f371cc18f81168c74314b77480862b6c516e15d5 Author: ixhamza <106930537+ixhamza@users.noreply.github.com> Date: Thu Jul 14 22:38:16 2022 +0500 Expose ZFS dataset case sensitivity setting via sb_opts Makes the case sensitivity setting visible on Linux in /proc/mounts. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com> Closes #13607 commit 9fe2f262aa24e3eda716787005cd127642aed22b Author: Tony Hutter <hutter2@llnl.gov> Date: Thu Jul 14 10:19:37 2022 -0700 zed: Look for NVMe DEVPATH if no ID_BUS We tried replacing an NVMe drive using autoreplace, only to see zed reject it with: zed[27955]: zed_udev_monitor: /dev/nvme5n1 no devid source This happened because ZED saw that ID_BUS was not set by udev for the NVMe drive, and thus didn't think it was "real drive". This commit allows NVMe drives to be autoreplaced even if ID_BUS is not set. Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #13512 Closes #13646 commit 1d3ba0bf01020f5459b1c28db3979129088924c0 Author: Tino Reichardt <milky-zfs@mcmilk.de> Date: Mon Jul 11 23:16:13 2022 +0200 Replace dead opensolaris.org license link The commit replaces all findings of the link: http://www.opensolaris.org/os/licensing with this one: https://opensource.org/licenses/CDDL-1.0 Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Closes #13619 commit e4ab3f40df994178c5fc629c2ad07c505f5a76eb Author: Tony Hutter <hutter2@llnl.gov> Date: Mon Jul 11 13:35:19 2022 -0700 zed: Ignore false 'atari' partitions in autoreplace libudev will sometimes falsely identify an 'atari' partition on a blank disk, preventing it from being used in an autoreplace. This seems to be a known issue. The workaround is to just ignore the fake partition and continue with the autoreplace. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #13497 Closes #13632 commit 677ca1e825af80f60569f84803304ccf0092728b Author: Tony Hutter <hutter2@llnl.gov> Date: Mon Jul 11 11:35:01 2022 -0700 rpm: Silence "unversioned Obsoletes" warnings on EL 9 Get rid of RPM warnings on AlmaLinux 9: "It's not recommended to have unversioned Obsoletes" Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #13584 Closes #13638 commit e6489be3470ecc1088b69a17b63a6d45d57f1c16 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jul 11 11:29:12 2022 -0700 Linux: Align MODULE_LICENSE macro text Specify the lua and zstd license text in the manor in which the kernel MODULE_LICENSE macro requires it. The now duplicate entries were merged and a comment added to make it clear what they apply to. Reviewed-by: Christian Schwarz <christian.schwarz@nutanix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13641 commit cb01da68057dcb9e612e8d2e97d058c46c3574af Author: Finix1979 <yanchongwen@hotmail.com> Date: Fri Jul 8 02:43:58 2022 +0800 Call nvlist_free before return Fixes a small kernel memory leak which would occur if a pool failed to import because the `DMU_POOL_VDEV_ZAP_MAP` key can't be read from a presumably damaged MOS config. In the case of a missing key there was no leak. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Finix1979 <yancw@info2soft.com> Closes #13629 commit 74230a5bc1be6e5e84a5f41b26f6f65a155078f0 Author: Alexander Motin <mav@FreeBSD.org> Date: Tue Jul 5 19:27:29 2022 -0400 Avoid memory copy when verifying raidz/draid parity Before this change for every valid parity column raidz_parity_verify() allocated new buffer and copied there existing data, then recalculated the parity and compared the result with the copy. This patch removes the memory copy, simply swapping original buffer pointers with newly allocated empty ones for parity recalculation and comparison. Original buffers with potentially incorrect parity data are then just freed, while new recalculated ones are used for repair. On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this change reduces memory traffic during scrub by 17% and total unhalted CPU time by 25%. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13613 commit 1ac7d194e5ca31d5284e410a87ad9f9669a7f5b5 Author: Alexander Motin <mav@FreeBSD.org> Date: Tue Jul 5 19:26:20 2022 -0400 Avoid memory copies during mirror scrub Issuing several scrub reads for a block we may use the parent ZIO buffer for one of child ZIOs. If that read complete successfully, then we won't need to copy the data explicitly. If block has only one copy (typical for root vdev, which is also a mirror inside), then we never need to copy -- succeed or fail as-is. Previous code also copied data from buffer of every successfully completed child ZIO, but that just does not make any sense. On healthy N-wide mirror this saves all N+1 (or even more in case of ditto blocks) memory copies for each scrubbed block, allowing CPU to focus mostly on check-summing. For other vdev types it should save one memory copy per block copy at root vdev. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13606 commit 6fca6195cdf3079a6e11444e42d7ce4aca10c6a1 Author: наб <nabijaczleweli@nabijaczleweli.xyz> Date: Thu Jun 30 20:31:09 2022 +0200 Re-fix -Wwrite-strings on FreeBSD Follow up fix for a926aab902ac5c680f4766568d19674b80fb58bb. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13348 Closes #13610 commit eefe83eaa68f7cb4a49c580dd940d3688e42c849 Author: Toyam Cox <aviator45003@gmail.com> Date: Thu Jun 30 13:47:58 2022 -0400 dracut: fix boot on non-zfs-root systems Simply prevent overwriting root until it needs to be overwritten. Dracut could change this value before this module is called, but won't change the kernel command line. Reviewed-by: Andrew J. Hesford <ajh@sideband.org> Signed-off-by: Toyam Cox <vaelatern@voidlinux.org> Closes #13592 commit 5a4dd3a262106c1506bdc154d9474efa6510f33a Author: gregory-lee-bartholomew <gregory.lee.bartholomew@gmail.com> Date: Thu Jun 30 12:43:27 2022 -0500 contrib: dracut: README.md Change zfs-snapshot-bootfs.service to zfs-rollback-bootfs.service in cmdline point 4 of README.md. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com> Closes #13609 commit 34e5423f83202653bd6b153577187f6ed943c157 Author: George Amanakis <gamanakis@gmail.com> Date: Thu Jun 30 02:06:16 2022 +0200 Fix dnode byteswapping If a dnode has a spill pointer, and we use DN_SLOTS_TO_BONUSLEN() then we will possibly include the spill pointer in the len calculation and it will be byteswapped. Then dnode_byteswap() will carry on and swap the spill pointer again. Fix this by using DN_MAX_BONUS_LEN() instead. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #13002 Closes #13015 commit 2d434e8ae4139ce14a1b058839a144bf952e79ea Author: gregory-lee-bartholomew <gregory.lee.bartholomew@gmail.com> Date: Wed Jun 29 18:56:04 2022 -0500 contrib: dracut: zfs-{rollback,snapshot}-bootfs: explicit snapname fix Due to a missing semicolon on the ExecStart line, it wasn't possible to specify the snapshot name on the bootfs.{rollback,snapshot} kernel parameters if the boot dataset name was obtained from the root=zfs:... kernel parameter. Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com> Closes #13585 commit 07f2793e869196fcbcd5057d9ada377674262fe3 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Wed Jun 29 15:33:38 2022 -0700 dracut: fix typo in mount-zfs.sh.in Format the `zpool get` command correctly. The -o option must be followed by "all" or the requested field name. Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13602 commit 60e389ca10085acfa7cd35f79ab4465d968a942f Author: наб <nabijaczleweli@nabijaczleweli.xyz> Date: Tue Jun 28 23:31:55 2022 +0200 module: lua: ldo: fix pragma name /home/nabijaczleweli/store/code/zfs/module/lua/ldo.c:175:32: warning: unknown option after ‘#pragma GCC diagnostic’ kind [-Wpragmas] 175 | #pragma GCC diagnostic ignored "-Winfinite-recursion"a | ^~~~~~~~~~~~~~~~~~~~~~ Fixes: a6e8113fed8a508ffda13cf1c4d8da99a4e8133a ("Silence -Winfinite-recursion warning in luaD_throw()") Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13348 commit 404601aca07dc44273c1ab33e09067423f97c591 Author: наб <nabijaczleweli@nabijaczleweli.xyz> Date: Tue Jun 28 23:27:44 2022 +0200 linux: libzfs: util: don't fallthrough to to end-of-switch lib/libzfs/os/linux/libzfs_util_os.c:262:3: error: fallthrough annotation does not directly precede switch label zfs_fallthrough; ^ ./lib/libspl/include/sys/feature_tests.h:34:26: note: expanded from macro 'zfs_fallthrough' Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13348 commit a2f6bff976e43c58d8460c288bac13868c614447 Author: наб <nabijaczleweli@nabijaczleweli.xyz> Date: Sat May 28 15:19:05 2022 +0200 tests: modernise zdb_decompress Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13348 commit dd66857d92d86643bda57b92fdd58f016bd1725e Author: наб <nabijaczleweli@nabijaczleweli.xyz> Date: Tue Apr 19 20:49:30 2022 +0200 Remaining {=> const} char|void *tag Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13348 commit a926aab902ac5c680f4766568d19674b80fb58bb Author: наб <nabijaczleweli@nabijaczleweli.xyz> Date: Tue Apr 19 20:38:30 2022 +0200 Enable -Wwrite-strings Also, fix leak from ztest_global_vars_to_zdb_args() Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Closes #13348 commit e7d90362e5d5f873e1272519da96780cf00a0e28 Author: gaoyanping <yanping.gao@xtaotech.com> Date: Thu Jun 30 04:38:46 2022 +0800 Fix znode group permission different from acl mask Zp->z_mode is set at the same time inode->i_mode is being changed. This has the effect of keeping both in sync without relying on zfs_znode_update_vfs. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: yanping.gao <yanping.gao@xtaotech.com> Closes #13581 commit 325096545a47aa01cd5966301ba1f7a6e5eff349 Author: Kristof Provost <github@sigsegv.be> Date: Tue Jun 28 23:11:38 2022 +0200 FreeBSD: only define B_FALSE/B_TRUE if NEED_SOLARIS_BOOLEAN is not set If NEED_SOLARIS_BOOLEAN is defined we define an enum boolean_t, which defines B_TRUE/B_FALSE as well. If we have both the define and the enum things don't build (because that translates to 'enum { 0, 1 } boolean_t'). While here also remove an incorrect '#else'. With it in place we only parse a section if the include guard is triggered. So we'd only use that code if this file is included twice. This is clearly unintended, and also means we don't get the 'boolean_t' definition. Fix this. Reviewed-by: Warner Losh <imp@bsdimp.com> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Kristof Provost <kprovost@netgate.com> Sponsored-By: Rubicon Communications, LLC ("Netgate") Closes #13596 commit 827322991f25785ff032ad3cef84e12b1c609759 Author: Alexander Motin <mav@FreeBSD.org> Date: Tue Jun 28 14:23:31 2022 -0400 Fix and disable blocks statistics during scrub Block statistics calculation during scrub I/O issue in case of sorted scrub accounted ditto blocks several times. Embedded blocks on other side were not accounted at all. This change moves the accounting from issue to scan stage, that fixes both problems and also allows to avoid pool-wide locking and the lock contention it created. Since this statistics is quite specific and is not even exposed now anywhere, disable its calculation by default to not waste CPU time. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13579 commit 43569ee374208e827409ec1ce4cf169d7a9a3095 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 23:36:21 2022 +0000 Fix objtool: missing int3 after ret warning Resolve straight-line speculation warnings reported by objtool for x86_64 assembly on Linux when CONFIG_SLS is set. See the following LWN article for the complete details. https://lwn.net/Articles/877845/ Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit 8aceded193f58da9a3837fb9d828dab05ad9e82f Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 22:27:55 2022 +0000 Fix -Wformat-overflow warning in zfs_project_handle_dir() Switch to using asprintf() to satisfy the compiler and resolve the potential format-overflow warning. Not the conditional before the sprintf() would have prevented this regardless. cmd/zfs/zfs_project.c: In function ‘zfs_project_handle_dir’: cmd/zfs/zfs_project.c:241:38: error: ‘/’ directive writing 1 byte into a region of size between 0 and 4352 [-Werror=format-overflow=] cmd/zfs/zfs_project.c:241:17: note: ‘sprintf’ output between 2 and 4609 bytes into a destination of size 4352 Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit f11431a31776734722e14bd6186b93a25823a0ee Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 21:54:42 2022 +0000 Fix -Wformat-truncation warning in upgrade_set_callback() Extend the buffer slightly resolve the warning. cmd/zfs/zfs_main.c: In function ‘upgrade_set_callback’: cmd/zfs/zfs_main.c:2446:22: error: ‘%llu’ directive output may be truncated writing between 1 and 20 bytes into a region of size 16 [-Werror=format-truncation=] cmd/zfs/zfs_main.c:2445:24: note: ‘snprintf’ output between 2 and 21 bytes into a destination of size 16 Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit c175f5ebb2f4910e2d4f38f794e3973e53baa94e Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 21:35:38 2022 +0000 Fix -Wuse-after-free warning in dbuf_destroy() Move the use of the db pointer after it is freed. It's only used as a tag so a dereference would never occur, but there's no reason we can't invert the order to resolve the warning. module/zfs/dbuf.c: In function 'dbuf_destroy': module/zfs/dbuf.c:2953:17: error: pointer 'db' may be used after 'free' [-Werror=use-after-free] Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit 9619bcdefb0dff38e36f8c89d9e2980112105cbb Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 21:32:03 2022 +0000 Fix -Wuse-after-free warning in dbuf_issue_final_prefetch_done() Move the use of the private pointer after it is freed. It's only used as a tag so a dereference would never occur, but there's no harm in inverting the order to resolve the warning. module/zfs/dbuf.c: In function 'dbuf_issue_final_prefetch_done': module/zfs/dbuf.c:3204:17: error: pointer 'private' may be used after 'free' [-Werror=use-after-free] Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit ff7e405f83fbfcd763c4b7ed8b68258227765731 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 21:13:26 2022 +0000 Fix -Wattribute-warning in dsl layer The memcpy(), memmove(), and memset() functions have been annotated to perform bounds checking when using FORTIFY_SOURCE. A warning is now generted when writing beyond the end of the specified field. Alternately, the new struct_group() macro could be used to create an anonymous union member for use by memcpy(). However, since this is the only place the macro would be helpful it's preferable to restructure the code slights to avoid the need for additional compatibility code when the macro does not exist. https://lore.kernel.org/lkml/20211118183807.1283332-1-keescook@chromium.org/T/ Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit 18df6afdfc63b7c27cbb2b6152d76c40196e9dbb Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 19:37:38 2022 +0000 Fix -Wattribute-warning in edonr The wrong union memory was being accessed in EdonRInit resulting in a write beyond size of field compiler warning. Reference the correct member to resolve the warning. The warning was correct and this in case the mistake was harmless. In function ‘fortify_memcpy_chk’, inlined from ‘EdonRInit’ at zfs/module/icp/algs/edonr/edonr.c:494:3: ./include/linux/fortify-string.h:344:25: error: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit b0f7dd276c930129fef8575e15a36ec659e31cd2 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 22:36:38 2022 +0000 Fix -Wattribute-warning in zfs_log_xvattr() Restructure the code in zfs_log_xvattr() to use a lr_attr_end structure when accessing lr_attr_t elements located after the variable sized array. This makes the code more understandable and resolves the accessing beyond the end of the field warnings. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit a6e8113fed8a508ffda13cf1c4d8da99a4e8133a Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Mon Jun 20 19:53:58 2022 +0000 Silence -Winfinite-recursion warning in luaD_throw() This code should be kept inline with the upstream lua version as much as possible. Therefore, we simply want to silence the warning. This check was enabled by default as part of -Wall in gcc 12.1. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13528 Closes #13575 commit 80a650b7bb04bce3aef5e4cfd1d966e3599dafd4 Author: George Amanakis <gamanakis@gmail.com> Date: Mon Jun 27 23:17:25 2022 +0200 Avoid panic with recordsize > 128k, raw sending and no large_blocks The current codebase does not support raw sending buffers with block size > 128kB when large_blocks is not active. This can happen in the codepath dsl_dataset_sync()->dmu_objset_sync()->zio_nowait() which calls back dmu_objset_write_done()->dsl_dataset_block_born(). If dsl_dataset_sync() completes its run before dsl_dataset_block_born() is called, we will end up not activating some of the necessary flags, while having blocks based on those flags written in the filesystem. A subsequent send will then panic. Fix this by directly deciding in dmu_objset_sync() whether these flags need to be activated later by dsl_dataset_sync(). Instead of panicking due to a NULL pointer dereference in dmu_dump_write() in case of a send, print out an error message. Also during scrub verify there are no contradicting filesystem flags. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Signed-off-by: George Amanakis <gamanakis@gmail.com> Closes #12275 Closes #12438 commit 1cd72b9c1348bbc71310fb6c3d49670362faf306 Author: Alexander Motin <mav@FreeBSD.org> Date: Mon Jun 27 14:08:21 2022 -0400 Avoid two 64-bit divisions per scanned block Change math to make it like the ARC, using multiplications instead. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13591 commit c0bf952c846100750f526c2a32ebec17694a201b Author: Alexander Motin <mav@FreeBSD.org> Date: Fri Jun 24 16:55:58 2022 -0400 Several B-tree optimizations - Introduce first element offset within a leaf. It allows to reduce by ~50% average memmove() size when adding/removing elements. If the added/removed element is in the first half of the leaf, we may shift elements before it and adjust the bth_first instead of moving more elements after it. - Use memcpy() instead of memmove() when we know there is no overlap. - Switch from uint64_t to uint32_t. It does not limit anything, but 32-bit arches should appreciate it greatly in hot paths. - Store leaf capacity in struct btree to avoid 64-bit divisions. - Adjust zfs_btree_insert_into_leaf() to always result in balanced leaves after splitting, no matter where the new element was inserted. Not that we care about it much, but it should also allow B-trees with as little as two elements per leaf instead of 4 previously. When scrubbing pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks this reduces amount of time spent in memmove() inside the scan thread from 13.7% to 5.7% and total scrub time by ~15 seconds out of 9 minutes. It should also reduce spacemaps load time, but I haven't measured it. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13582 commit ccf89b39fe7f30dd53aec69e04de3f2728c7387c Author: Alan Somers <asomers@gmail.com> Date: Fri Jun 24 14:28:42 2022 -0600 Add a "zstream decompress" subcommand It can be used to repair a ZFS file system corrupted by ZFS bug #12762. Use it like this: zfs send -c <DS> | \ zstream decompress <OBJECT>,<OFFSET>[,<COMPRESSION_ALGO>] ... | \ zfs recv <DST_DS> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Alan Somers <asomers@gmail.com> Sponsored-by: Axcient Workaround for #12762 Closes #13256 commit 1c0c729ab4165cd828fbeab404353b45b3836360 Author: Alexander Motin <mav@FreeBSD.org> Date: Fri Jun 24 12:50:37 2022 -0400 Several sorted scrub optimizations - Reduce size and comparison complexity of q_exts_by_size B-tree. Previous code used two 64-bit divisions and many other operations to compare two B-tree elements. It created enormous overhead. This implementation moves the math to the upper level and stores the score in the B-tree elements themselves. Since all that we need to store in that B-tree is the extent score and offset, those can fit into single 8 byte value instead of 24 bytes of q_exts_by_addr element and can be compared with single operation. - Better decouple secondary tree logic from main range_tree by moving rt_btree_ops and related functions into dsl_scan.c as ext_size_ops. Those functions are very small to worry about the code duplication and range_tree does not need to know details such as rt_btree_compare. - Instead of accounting number of pending bytes per pool, that needs atomic on global variable per block, account the number of non-empty per-vdev queues, that change much more rarely. - When extent scan is interrupted by TXG end, continue it in the next TXG instead of selecting next best extent. It allows to avoid leaving one truncated (and so likely not the best any more) extent each TXG. On top of some other optimizations this saves about 1.5 minutes out of 10 to scrub pool of 12 SSDs, storing 1.5TB of 4KB zvol blocks. Reviewed-by: Paul Dagnelie <pcd@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tom Caputi <caputit1@tcnj.edu> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13576 commit 83691bebf062d13e64a93ff80bf727cd1c162bb2 Author: Toomas Soome <tsoome@me.com> Date: Fri Jun 24 19:48:10 2022 +0300 Use macros for quotes and such Use Dq,Pq/Po/Pc macros. illumos dumpadm is now in section 8. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Toomas Soome <tsoome@me.com> Closes #13586 commit ad8b9f940c1e39a38af61934737c1e4cf8ab5c08 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Thu Jun 23 10:36:28 2022 -0700 Scrub mirror children without BPs When scrubbing a raidz/draid pool, which contains a replacing or sparing mirror with multiple online children, only one child will be read. This is not normally a serious concern because the DTL records are used to determine where a good copy of the data is. As long as the data can be read from one child the mirror vdev will use it to repair gaps in any of its children. Furthermore, even if the data which was read is corrupt the raidz code will detect this and issue its own repair I/O to correct the damage in the mirror vdev. However, in the scenario where the DTL is wrong due to silent data corruption (say due to overwriting one child) and the scrub happens to read from a child with good data, then the other damaged mirror child will not be detected nor repaired. While this is possible for both raidz and draid vdevs, it's most pronounced when using draid. This is because by default the zed will sequentially rebuild a draid pool to a distributed spare, and the distributed spare half of the mirror is always preferred since it delivers better performance. This means the damaged half of the mirror will go undetected even after scrubbing. For system administrations this behavior is non-intuitive and in a worst case scenario could result in the only good copy of the data being unknowingly detached from the mirror. This change resolves the issue by reading all replacing/sparing mirror children when scrubbing. When the BP isn't available for verification, then compare the data buffers from each child. They must all be identical, if not there's silent damage and an error is returned to prompt the top-level vdev to issue a repair I/O to rewrite the data on all of the mirror children. Since we can't tell which child was wrong a checksum error is logged against the replacing or sparing mirror vdev. Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13555 commit deb1213098e2dc10e6eee5e5c57bb40584e096a6 Author: Tino Reichardt <milky-zfs@mcmilk.de> Date: Tue Jun 21 23:32:09 2022 +0200 Fix memory allocation issue for BLAKE3 context The kmem_alloc(sizeof (*ctx), KM_NOSLEEP) call on FreeBSD can't be used in this code segment. Work around this by pre-allocating a percpu context array for later use. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Closes #13568 commit b17663f571bfa1ef5e77d3c72f1610bacfc0c6ad Author: Matthew Thode <mthode@mthode.org> Date: Tue Jun 21 12:37:20 2022 -0500 Remove install of zfs-load-module.service for dracut The zfs-load-module.service service is not currently provided by the OpenZFS repository so we cannot safely assume it exists. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Thode <mthode@mthode.org> Closes #13574 commit d51f4ea5f9575847a271f2c99253b072a6ede07e Author: Alexander Motin <mav@FreeBSD.org> Date: Fri Jun 17 18:38:51 2022 -0400 FreeBSD: Improve crypto_dispatch() handling Handle crypto_dispatch() return values same as crp->crp_etype errors. On FreeBSD 12 many drivers returned same errors both ways, and lack of proper handling for the first ended up in assertion panic later. It was changed in FreeBSD 13, but there is no reason to not be safe. While there, skip waiting for completion, including locking and wakeup() call, for sessions on synchronous crypto drivers, such as typical aesni and software. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13563 commit f60973998593c37f55beea05e74528c1992b7849 Author: Andrew <awalker@ixsystems.com> Date: Fri Jun 17 13:44:49 2022 -0500 expose snapshot count via stat(2) of .zfs/snapshot (#13559) Increase nlinks in stat results of ./zfs/snapshot based on snapshot count. This provides quick and efficient method for administrators to get snapshot counts without having to use libzfs or list the snapdir contents. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Andrew Walker <awalker@ixsystems.com> Closes #13559 commit 10891b37fa8f2cbf71ec529fc3808113d94d52ef Author: ixhamza <106930537+ixhamza@users.noreply.github.com> Date: Thu Jun 16 02:26:12 2022 +0500 libzfs: Prevent overridding of error code zfs_send_cb_impl fails to report error for some flags. Use second error variable for send_conclusion_record. Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com> Closes #13558 commit dd8671459f59484b1c20fc1b5e1c3acaa2a290c1 Author: Alexander Motin <mav@FreeBSD.org> Date: Wed Jun 15 17:25:08 2022 -0400 Reduce ZIO io_lock contention on sorted scrub During sorted scrub multiple threads (one per vdev) are issuing many ZIOs same time, all using the same scn->scn_zio_root ZIO as parent. It causes huge lock contention on the single global lock on that ZIO. Improve it by introducing per-queue null ZIOs, children to that one, and using them instead as proxy. For 12 SSD pool storing 1.5TB of 4KB blocks on 80-core system this dramatically reduces lock contention and reduces scrub time from 21 minutes down to 12.5, while actual read stages (not scan) are about 3x faster, reaching 100K blocks per second per vdev. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13553 commit bc00d2c711c5bd930fe63deae3946ed3fb2463b4 Author: crass <development@efficientek.com> Date: Wed Jun 15 16:22:52 2022 -0500 Add support for ARCH=um for x86 sub-architectures When building modules (as well as the kernel) with ARCH=um, the options -Dsetjmp=kernel_setjmp and -Dlongjmp=kernel_longjmp are passed to the C preprocessor for C files. This causes the setjmp and longjmp used in module/lua/ldo.c to be kernel_setjmp and kernel_longjmp respectively in the object file. However, the setjmp and longjmp that is intended to be called is defined in an architecture dependent assembly file under the directory module/lua/setjmp. Since it is an assembly and not a C file, the preprocessor define is not given and the names do not change. This becomes an issue when modpost is trying to create the Module.symvers and sees no defined symbol for kernel_setjmp and kernel_longjmp. To fix this, if the macro CONFIG_UML is defined, then setjmp and longjmp macros are undefined. When building with ARCH=um for x86 sub-architectures, CONFIG_X86 is not defined. Instead, CONFIG_UML_X86 is defined. Despite this, the UML x86 sub-architecture can use the same object files as the x86 architectures because the x86 sub-architecture UML kernel is running with the same instruction set as CONFIG_X86. So the modules/Kbuild build file is updated to add the same object files that CONFIG_X86 would add when CONFIG_UML_X86 is defined. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Glenn Washburn <development@efficientek.com> Closes #13547 commit 988431966639d791ac269011d136e85f3602df75 Author: Damian Szuberski <szuberskidamian@gmail.com> Date: Thu Jun 16 07:20:28 2022 +1000 Fix clang 13 compilation errors ``` os/linux/zfs/zvol_os.c:1111:3: error: ignoring return value of function declared with 'warn_unused_result' attribute [-Werror,-Wunused-result] add_disk(zv->zv_zso->zvo_disk); ^~~~~~~~ ~~~~~~~~~~~~~~~~~~~~ zpl_xattr.c:1579:1: warning: no previous prototype for function 'zpl_posix_acl_release_impl' [-Wmissing-prototypes] ``` Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: szubersk <szuberskidamian@gmail.com> Closes #13551 commit 4ff7a8fa2f1e66c4a10ecd4fd74c9381db24fb02 Author: Allan Jude <allan@klarasystems.com> Date: Tue Jun 14 14:27:53 2022 -0400 Replace ZPROP_INVAL with ZPROP_USERPROP where it means a user property Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Allan Jude <allan@klarasystems.com> Sponsored-by: Klara Inc. Closes #12676 commit 9e605cf155040f76f3971f056a4410ac8f500fe3 Author: Ryan Moeller <freqlabs@FreeBSD.org> Date: Mon Jun 13 20:30:34 2022 +0000 spl: Use a clearer name for the user namespace fd This fd has nothing to do with cleanup, that's just the name of the field in zfs_cmd_t that was used to pass it to the kernel. Call it what it is, an fd for a user namespace. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #13554 commit def1a401f44abce71196949feaecbd66ebcddf0b Author: Ryan Moeller <freqlabs@FreeBSD.org> Date: Mon Jun 13 20:24:23 2022 +0000 libzfs: zfs_userns: Don't leak the namespace fd zfs_userns opens a file descriptor for the kernel to look up a namespace, but does not close it. Close the fd when we're done with it. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #13554 commit 482505fd4219a4c3a91f2857199436df27ad687e Author: Julian Brunner <julian.brunner@gmail.com> Date: Sat Jun 11 03:22:14 2022 +0200 Add weekly and monthly systemd timers for trimming On machines using systemd, trim timers can be enabled on a per-pool basis. Weekly and monthly timer units are provided. Timers can be enabled as follows: systemctl enable zfs-trim-weekly@rpool.timer --now systemctl enable zfs-trim-monthly@datapool.timer --now Each timer will pull in zfs-trim@${poolname}.service, which is not schedule-specific. The manpage zpool-trim has been updated accordingly. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Julian Brunner <julian.brunner@gmail.com> Closes #13544 commit 87b46d63b283d9e2c3b10945f37233d1dedef02a Author: Alexander Motin <mav@FreeBSD.org> Date: Fri Jun 10 13:01:46 2022 -0400 Improve sorted scan memory accounting Since we use two B-trees q_exts_by_size and q_exts_by_addr, we should count 2x sizeof (range_seg_gap_t) per node. And since average B-tree memory efficiency is about 75%, we should increase it to 3x. Previous code under-counted up to 30% of the memory usage. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13537 commit 4ed5e25074ffec266df38556d9b3a928c5e0dee9 Author: Will Andrews <will.andrews@klarasystems.com> Date: Sun Feb 21 10:19:43 2021 -0600 Add Linux namespace delegation support This allows ZFS datasets to be delegated to a user/mount namespace Within that namespace, only the delegated datasets are visible Works very similarly to Zones/Jailes on other ZFS OSes As a user: ``` $ unshare -Um $ zfs list no datasets available $ echo $$ 1234 ``` As root: ``` # zfs list NAME ZONED MOUNTPOINT containers off /containers containers/host off /containers/host containers/host/child off /containers/host/child containers/host/child/gchild off /containers/host/child/gchild containers/unpriv on /unpriv containers/unpriv/child on /unpriv/child containers/unpriv/child/gchild on /unpriv/child/gchild # zfs zone /proc/1234/ns/user containers/unpriv ``` Back to the user namespace: ``` $ zfs list NAME USED AVAIL REFER MOUNTPOINT containers 129M 47.8G 24K /containers containers/unpriv 128M 47.8G 24K /unpriv containers/unpriv/child 128M 47.8G 128M /unpriv/child ``` Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Will Andrews <will.andrews@klarasystems.com> Signed-off-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com> Co-authored-by: Allan Jude <allan@klarasystems.com> Co-authored-by: Mateusz Piotrowski <mateusz.piotrowski@klarasystems.com> Sponsored-by: Buddy <https://buddy.works> Closes #12263 commit a1aa8f14c864b6851649f9c3e74e9f12e6518edd Author: Allan Jude <allan@klarasystems.com> Date: Fri Jul 2 19:16:58 2021 +0000 Revert parts of 938cfeb0f27303721081223816d4f251ffeb1767 When read and writing the UID/GID, we always want the value relative to the root user namespace, the kernel will take care of remapping this to the user namespace for us. Calling from_kuid(user_ns, uid) with a unmapped uid will return -1 as that uid is outside of the scope of that namespace, and will result in the files inside the namespace all being owned by 'nobody' and not being allowed to call chmod or chown on them. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Allan Jude <allan@klarasystems.com> Closes #12263 commit fc5200aa9b345972fc1b99869b03a373090b84c7 Author: Alexander Motin <mav@FreeBSD.org> Date: Thu Jun 9 18:27:36 2022 -0400 AVL: Remove obsolete branching optimizations Modern Clang and GCC can successfully implement simple conditions without branching with math and flag operations. Use of arrays for translation no longer helps as much as it was 14+ years ago. Disassemble of the code generated by Clang 13.0.0 on FreeBSD 13.1, Clang 14.0.4 on FreeBSD 14 and GCC 10.2.1 on Debian 11 with this change still shows no branching instructions. Profiling of CPU-bound scan stage of sorted scrub shows reproducible reduction of time spent inside avl_find() from 6.52% to 4.58%. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13540 commit cdeb98a116a3b31558d6d7cb861b0cbd992a27cc Author: Ryan Moeller <freqlabs@FreeBSD.org> Date: Wed Jun 8 16:32:38 2022 +0000 libzfs: Rename msg bufs to errbuf for consistency `libzfs_pool.c` uses the name `msg` where everywhere else in libzfs uses `errbuf` for the error message buffer. Use the name consistent with the rest of libzfs and use ERRBUFLEN instead of 1024. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #13539 commit d68a2bfa994d3d064924e8c303a9a7e8e6e02682 Author: Ryan Moeller <freqlabs@FreeBSD.org> Date: Wed Jun 8 13:08:10 2022 +0000 libzfs: Define the defecto standard errbuf size Every errbuf array in libzfs is 1024 chars. Define ERRBUFLEN in a shared header, and use it. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Moeller <freqlabs@FreeBSD.org> Closes #13539 commit 6f73d02168ea4d4c27e95d3f23df7221c7321e07 Author: Tony Hutter <hutter2@llnl.gov> Date: Thu Jun 9 07:10:38 2022 -0700 zvol: Support blk-mq for better performance Add support for the kernel's block multiqueue (blk-mq) interface in the zvol block driver. blk-mq creates multiple request queues on different CPUs rather than having a single request queue. This can improve zvol performance with multithreaded reads/writes. This implementation uses the blk-mq interfaces on 4.13 or newer kernels. Building against older kernels will fall back to the older BIO interfaces. Note that you must set the `zvol_use_blk_mq` module param to enable the blk-mq API. It is disabled by default. In addition, this commit lets the zvol blk-mq layer process whole `struct request` IOs at a time, rather than breaking them down into their individual BIOs. This reduces dbuf lock contention and overhead versus the legacy zvol submit_bio() codepath. sequential dd to one zvol, 8k volblocksize, no O_DIRECT: legacy submit_bio() 292MB/s write 453MB/s read this commit 453MB/s write 885MB/s read It also introduces a new `zvol_blk_mq_chunks_per_thread` module parameter. This parameter represents how many volblocksize'd chunks to process per each zvol thread. It can be used to tune your zvols for better read vs write performance (higher values favor write, lower favor read). Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes #13148 Issue #12483 commit 985c33b132f6c23a69bd808e008ae0f46131a31e Author: Tino Reichardt <milky-zfs@mcmilk.de> Date: Thu Jun 9 00:55:57 2022 +0200 Introduce BLAKE3 checksums as an OpenZFS feature This commit adds BLAKE3 checksums to OpenZFS, it has similar performance to Edon-R, but without the caveats around the latter. Homepage of BLAKE3: https://github.com/BLAKE3-team/BLAKE3 Wikipedia: https://en.wikipedia.org/wiki/BLAKE_(hash_function)#BLAKE3 Short description of Wikipedia: BLAKE3 is a cryptographic hash function based on Bao and BLAKE2, created by Jack O'Connor, Jean-Philippe Aumasson, Samuel Neves, and Zooko Wilcox-O'Hearn. It was announced on January 9, 2020, at Real World Crypto. BLAKE3 is a single algorithm with many desirable features (parallelism, XOF, KDF, PRF and MAC), in contrast to BLAKE and BLAKE2, which are algorithm families with multiple variants. BLAKE3 has a binary tree structure, so it supports a practically unlimited degree of parallelism (both SIMD and multithreading) given enough input. The official Rust and C implementations are dual-licensed as public domain (CC0) and the Apache License. Along with adding the BLAKE3 hash into the OpenZFS infrastructure a new benchmarking file called chksum_bench was introduced. When read it reports the speed of the available checksum functions. On Linux: cat /proc/spl/kstat/zfs/chksum_bench On FreeBSD: sysctl kstat.zfs.misc.chksum_bench This is an example output of an i3-1005G1 test system with Debian 11: implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 1196 1602 1761 1749 1762 1759 1751 skein-generic 546 591 608 615 619 612 616 sha256-generic 240 300 316 314 304 285 276 sha512-generic 353 441 467 476 472 467 426 blake3-generic 308 313 313 313 312 313 312 blake3-sse2 402 1289 1423 1446 1432 1458 1413 blake3-sse41 427 1470 1625 1704 1679 1607 1629 blake3-avx2 428 1920 3095 3343 3356 3318 3204 blake3-avx512 473 2687 4905 5836 5844 5643 5374 Output on Debian 5.10.0-10-amd64 system: (Ryzen 7 5800X) implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 1840 2458 2665 2719 2711 2723 2693 skein-generic 870 966 996 992 1003 1005 1009 sha256-generic 415 442 453 455 457 457 457 sha512-generic 608 690 711 718 719 720 721 blake3-generic 301 313 311 309 309 310 310 blake3-sse2 343 1865 2124 2188 2180 2181 2186 blake3-sse41 364 2091 2396 2509 2463 2482 2488 blake3-avx2 365 2590 4399 4971 4915 4802 4764 Output on Debian 5.10.0-9-powerpc64le system: (POWER 9) implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 1213 1703 1889 1918 1957 1902 1907 skein-generic 434 492 520 522 511 525 525 sha256-generic 167 183 187 188 188 187 188 sha512-generic 186 216 222 221 225 224 224 blake3-generic 153 152 154 153 151 153 153 blake3-sse2 391 1170 1366 1406 1428 1426 1414 blake3-sse41 352 1049 1212 1174 1262 1258 1259 Output on Debian 5.10.0-11-arm64 system: (Pi400) implementation 1k 4k 16k 64k 256k 1m 4m edonr-generic 487 603 629 639 643 641 641 skein-generic 271 299 303 308 309 309 307 sha256-generic 117 127 128 130 130 129 130 sha512-generic 145 165 170 172 173 174 175 blake3-generic 81 29 71 89 89 89 89 blake3-sse2 112 323 368 379 380 371 374 blake3-sse41 101 315 357 368 369 364 360 Structurally, the new code is mainly split into these parts: - 1x cross platform generic c variant: blake3_generic.c - 4x assembly for X86-64 (SSE2, SSE4.1, AVX2, AVX512) - 2x assembly for ARMv8 (NEON converted from SSE2) - 2x assembly for PPC64-LE (POWER8 converted from SSE2) - one file for switching between the implementations Note the PPC64 assembly requires the VSX instruction set and the kfpu_begin() / kfpu_end() calls on PowerPC were updated accordingly. Reviewed-by: Felix Dörre <felix@dogcraft.de> Reviewed-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Co-authored-by: Rich Ercolani <rincebrain@gmail.com> Closes #10058 Closes #12918 commit b9d98453f9387c413f91d1d9cdb0cba8e04dbd95 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Tue May 31 16:42:49 2022 -0700 autoconf: AC_MSG_CHECKING consistency Make the wording more consistent for the kernel AC_MSG_CHECKING output (e.g. "checking whether ...".). Additionally, group some of the VFS interface checks with the others. No functional change. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Attila Fülöp <attila@fueloep.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13529 commit 4c6526208db0d3d5abf44664e74d1e28156a3db7 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Tue May 31 16:30:59 2022 -0700 Linux 5.19 compat: asm/fpu/internal.h As of the Linux 5.19 kernel the asm/fpu/internal.h header was entirely removed. It has been effectively empty since the 5.16 kernel and provides no required functionality. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Attila Fülöp <attila@fueloep.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13529 commit 42cf2ad0e4e2adfa232f42e4254693467a4cc08c Author: Alexander Motin <mav@FreeBSD.org> Date: Wed Jun 1 12:54:35 2022 -0400 Remove wrong assertion in log spacemap It is typical, but not generally true that if log summary has more blocks it must also have unflushed metaslabs. Normally with metaslabs flushed in order it works, but there are known exceptions, such as device removal or metaslab being loaded during its flush attempt. Before 600a02b8844 if spa_flush_metaslabs() hit loading metaslab it usually stopped (unless memlimit is also exceeded), but now it may flush more metaslabs, just skipping that particular one. This increased chances of assertion to fire when the skipped metaslab is flushed on next iteration if all other metaslabs in that summary entry are already flushed out of order. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes #13486 Closes #13513 commit bc8192cd5b14cf4182bd2b19a6a8ed4f0bbed12b Author: Rich Ercolani <214141+rincebrain@users.noreply.github.com> Date: Tue May 31 18:41:33 2022 -0400 Corrected parameters for zstd early abort That'll teach me to try and recall them from the definition. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rich Ercolani <rincebrain@gmail.com> Closes #13519 commit 2310dba9ebf6259515b63fda3202199831669271 Author: Allan Jude <allan@klarasystems.com> Date: Tue May 31 18:37:46 2022 -0400 Fix typo in zil_commit() comment block Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ryan Moeller <ryan@iXsystems.com> Signed-off-by: Allan Jude <allan@klarasystems.com> Closes #13518 commit a70e613070a8ca96f8214ba1ff61549cbbad0a2f Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Tue May 31 14:38:00 2022 -0700 Linux 5.18 compat: META Update the META file to reflect compatibility with the 5.18 kernel. Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13527 commit 91350681b8c8b3f0a9b04e6ab3b8931406e87355 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Fri May 27 15:56:05 2022 -0700 Linux 5.19 compat: zap_flags_t conflict As of the Linux 5.19 kernel an identically named zap_flags_t typedef is declared in the include/linux/mm_types.h linux header. Sadly, the inclusion of this header cannot be easily avoided. To resolve the conflict a #define is used to remap the name in the OpenZFS sources when building against the Linux kernel. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13515 commit d41e864181e4544eca08332b31f85318a3b0e3b3 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Fri May 27 21:31:03 2022 +0000 Linux 5.19 compat: bdev_start_io_acct() / bdev_end_io_acct() As of the Linux 5.19 kernel the disk_*_io_acct() helper functions have been replaced by the bdev_*_io_acct() functions. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13515 commit c2c2e7bb8b7c269904777b61f4b0a678f1ffb9a3 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Fri May 27 20:44:43 2022 +0000 Linux 5.19 compat: aops->read_folio() As of the Linux 5.19 kernel the readpage() address space operation has been replaced by read_folio(). Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13515 commit a12a5cb5b821f24f26d388094cdac79deb0e879f Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Fri May 27 19:40:22 2022 +0000 Linux 5.19 compat: blkdev_issue_secure_erase() Linux 5.19 commit torvalds/linux@44abff2c0 splits the secure erase functionality from the blkdev_issue_discard() function. The blkdev_issue_secure_erase() must now be issued to issue a secure erase. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13515 commit e2c31f2bc7d190fbd8fc5c13bac23daffc5d7b56 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Fri May 27 18:20:04 2022 +0000 Linux 5.19 compat: bdev_max_secure_erase_sectors() Linux 5.19 commit torvalds/linux@44abff2c0 removed the blk_queue_secure_erase() helper function. The preferred interface is to now use the bdev_max_secure_erase_sectors() function to check for discard support. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13515 commit 5e4aedaca7cee981ed21ac856fd27b4682bb7888 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Fri May 27 17:51:55 2022 +0000 Linux 5.19 compat: bdev_max_discard_sectors() Linux 5.19 commit torvalds/linux@70200574cc removed the blk_queue_discard() helper function. The preferred interface is to now use the bdev_max_discard_sectors() function to check for discard support. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13515 commit 5f264996f4dc2d5279afe96698688a20c281c473 Author: Brian Behlendorf <behlendorf1@llnl.gov> Date: Fri May 27 20:28:51 2022 +0000 Linux 5.18 compat: bio_alloc() As for the Linux 5.18 kernel bio_alloc() expects a block_device struct as an argument. This removes the need for the bio_set_dev() compatibility code for 5.18 and newer kernels. Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #13515 commit 152d6fda54e61042a70059c95c44b364aea0bbd8 Author: Kevin Jin <33590050+jxdking@users.noreply.github.com> Date: Thu May 26 12:36:14 2022 -0400 Fix inflated quiesce time caused by lwb_tx during zil_commit() In current zil_commit() process, transaction lwb_tx is assigned in zil_lwb_write_issue(), and is committed in zil_lwb_flush_vdevs_done(). Thus, during lwb write out process, the txg is held in open or quiesing state, until zil_lwb_flush_vdevs_done() is called. If the zil's zio latency is high, it will cause txg_sync_thread() …

Before this change for every valid parity column raidz_parity_verify() allocated new buffer and copied there existing data, then recalculated the parity and compared the result with the copy. This patch removes the memory copy, simply swapping original buffer pointers with newly allocated empty ones for parity recalculation and comparison. Original buffers with potentially incorrect parity data are then just freed, while new recalculated ones are used for repair. On a pool of 12 4-wide raidz vdevs, storing 1.5TB of 16MB blocks, this change reduces memory traffic during scrub by 17% and total unhalted CPU time by 25%. Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alexander Motin <mav@FreeBSD.org> Sponsored-By: iXsystems, Inc. Closes openzfs#13613

New Features - Block cloning (#13392) - Linux container support (#14070, #14097, #12263) - Scrub error log (#12812, #12355) - BLAKE3 checksums (#12918) - Corrective "zfs receive" - Vdev and zpool user properties Performance - Fully adaptive ARC (#14359) - SHA2 checksums (#13741) - Edon-R checksums (#13618) - Zstd early abort (#13244) - Prefetch improvements (#14603, #14516, #14402, #14243, #13452) - General optimization (#14121, #14123, #14039, #13680, #13613, #13606, #13576, #13553, #12789, #14925, #14948) Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>

amotin requested a review from behlendorf July 1, 2022 02:56

amotin added Type: Performance Performance improvement or performance problem Status: Code Review Needed Ready for review and testing labels Jul 1, 2022

behlendorf approved these changes Jul 1, 2022

View reviewed changes

behlendorf added Status: Accepted Ready to integrate (reviewed, tested) and removed Status: Code Review Needed Ready for review and testing labels Jul 1, 2022

behlendorf requested a review from mmaybee July 1, 2022 21:55

behlendorf merged commit 74230a5 into openzfs:master Jul 5, 2022

amotin deleted the zscrub branch October 9, 2023 13:22

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Avoid memory copy when verifying raidz/draid parity. #13613

Avoid memory copy when verifying raidz/draid parity. #13613

amotin commented Jul 1, 2022

Avoid memory copy when verifying raidz/draid parity. #13613

Avoid memory copy when verifying raidz/draid parity. #13613

Conversation

amotin commented Jul 1, 2022

Types of changes

Checklist: