希望能够支持 海信 hs530r

[hunter24099]

Device Information | 设备信息

• SOC: [rk3399]
• Model [海信 hs530r]
• 4g 运存
• 16Gemmc
• fn-link 6222d-ubb wifi
• rtl8211
• usb 2.0 *2
• usb 3.0 *2
• hdmi *1

uboot、dtb、以及好用的Armbian_23.08.0-trunk_Hisense-hs530r_jammy_edge_6.5.5_xfce_desktop
链接：https://pan.baidu.com/s/1MNEwM_sln754olAontfrYQ
提取码：xfjd

感谢老大！

[ophub]

已经添加

[akwangl]

这板子有安卓tv吗

[hunter24099]

安卓据说有，我没找到。我刷了op大佬的op，网络显示百兆，usb3.0好像也驱动起来

…

---- 回复的原邮件 ---- | 发件人 | ***@***.***> | | 日期 | 2024年04月30日 09:47 | | 收件人 | ***@***.***> | | 抄送至 | ***@***.***>***@***.***> | | 主题 | Re: [ophub/amlogic-s9xxx-openwrt] 希望能够支持 海信 hs530r (Issue #572) | 这板子有安卓tv吗 — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.Message ID: ***@***.***>

[yw1818]

请问一下，这块板子刷机短接点是哪个点？麻烦指点一下，谢谢

[wlau29]

请问一下，这块板子刷机短接点是哪个点？麻烦指点一下，谢谢

[wlau29]

请问一下，这块板子的TTL在哪？

[wlau29]

这块板的千兆网卡有问题。

perf3 -c 192.168.198.202   
Connecting to host 192.168.198.202, port 5201
[  5] local 192.168.198.103 port 44412 connected to 192.168.198.202 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   100 MBytes   841 Mbits/sec    0   3.01 MBytes       
[  5]   1.00-2.00   sec  96.2 MBytes   809 Mbits/sec    0   3.01 MBytes  

---

iperf3 -c 192.168.198.202 -R
Connecting to host 192.168.198.202, port 5201
Reverse mode, remote host 192.168.198.202 is sending
[  5] local 192.168.198.103 port 44408 connected to 192.168.198.202 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.01   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   1.01-2.01   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   2.01-3.01   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   3.01-4.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   4.00-5.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   5.00-6.01   sec  0.00 Bytes  0.00 bits/sec  

---

用了 "ethtool -K eth0 tx off rx off" 没有帮助。

用了 "ethtool -s eth0 advertise 0xf" 设置成 100mbps, 就可以：

iperf3 -c 192.168.198.202 -R
Connecting to host 192.168.198.202, port 5201
Reverse mode, remote host 192.168.198.202 is sending
[  5] local 192.168.198.103 port 44444 connected to 192.168.198.202 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  11.2 MBytes  94.0 Mbits/sec                  
[  5]   1.00-2.00   sec  11.2 MBytes  94.1 Mbits/sec                  
[  5]   2.00-3.00   sec  11.2 MBytes  93.7 Mbits/sec   

[wlau29]

这块板的千兆网卡有问题。

perf3 -c 192.168.198.202   
Connecting to host 192.168.198.202, port 5201
[  5] local 192.168.198.103 port 44412 connected to 192.168.198.202 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   100 MBytes   841 Mbits/sec    0   3.01 MBytes       
[  5]   1.00-2.00   sec  96.2 MBytes   809 Mbits/sec    0   3.01 MBytes  

iperf3 -c 192.168.198.202 -R
Connecting to host 192.168.198.202, port 5201
Reverse mode, remote host 192.168.198.202 is sending
[  5] local 192.168.198.103 port 44408 connected to 192.168.198.202 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.01   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   1.01-2.01   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   2.01-3.01   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   3.01-4.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   4.00-5.00   sec  0.00 Bytes  0.00 bits/sec                  
[  5]   5.00-6.01   sec  0.00 Bytes  0.00 bits/sec  

用了 "ethtool -K eth0 tx off rx off" 没有帮助。

用了 "ethtool -s eth0 advertise 0xf" 设置成 100mbps, 就可以：

iperf3 -c 192.168.198.202 -R
Connecting to host 192.168.198.202, port 5201
Reverse mode, remote host 192.168.198.202 is sending
[  5] local 192.168.198.103 port 44444 connected to 192.168.198.202 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  11.2 MBytes  94.0 Mbits/sec                  
[  5]   1.00-2.00   sec  11.2 MBytes  94.1 Mbits/sec                  
[  5]   2.00-3.00   sec  11.2 MBytes  93.7 Mbits/sec   

用的是：Armbian_24.5.0_rockchip_hs530r_noble_6.1.87_server_2024.05.03.img.gz

[wlau29]

请问一下，这块板子刷机短接点是哪个点？麻烦指点一下，谢谢

短接到地：

[wlau29]

请问一下，这块板子刷机短接点是哪个点？麻烦指点一下，谢谢

短接到地：

在板子的背面，emmc的正背面。

[yw1818]

大佬们，这款板子EMMC可以换成256G吗？是不是直接买颗粒换上